Check Engine light issue

[suprapower]

so I have a B18B swap in my Integra. My question is my Check engiune light is still on, reason being because the ECu is tryin to read the knock ensor but the motor doesnt have one. Any ideas on how to turn the light off? Anyone?

[punkr6]

if you want the car to run right-pick one

1-install a knock sensor
2-get another ecu that doesnt look for a knock sensor
3-get it tuned and chipped by Scotty and he can remove the knock sensor from the ecu

[suprapower]

good lookin out dude!

[Barefoot]

if you want the car to run right-pick one

1-install a knock sensor
2-get another ecu that doesnt look for a knock sensor
3-get it tuned and chipped by Scotty and he can remove the knock sensor from the ecu

#2 is the correct answer. if u was running the correct ecu it wouldnt be looking for the knock anyways. so get the correct ecu and your problem is solved.

[Tech5]

or contact Mike Vteckid and he can chipp it to LS specs an take the knock sensor out of the Ecu!

[Black4DrEK]

^mike

[Tech5]

^mike

my fat fingers made a Boo Boo!

[scttydb411]

if you want the car to run right-pick one

1-install a knock sensor
2-get another ecu that doesnt look for a knock sensor
3-get it tuned and chipped by Scotty and he can remove the knock sensor from the ecu

i'm with this guy^^^