Results 1 to 5 of 5

Thread: Need Block re-surfaced

Hybrid View

  1. 03-10-2009, 10:53 PM #1
    DaRussian
    DaRussian is offline
    95 teggy for parts DaRussian's Avatar
    Join Date
    Oct 2006
    Location
    Douglasville
    Age
    37
    Posts
    761
    Rep Power
    20

    Default Need Block re-surfaced

    Ok, the surface of my block is uneven, the center back part of the block is lower then all the other sides. it was leaking oil into the coolant, at first i thought it was the headgasket, i changed the headgasket and it still leaks, i took off the head again and checked and the middle of the block is shaved a little. looks like somebody was cleaning the block and shaved a little more off then was supposed to.

    Does anybody know where i can resurface the block so that its straight again?
    its about 1/32 of an inch difference.
    How much would it cost to resurface and who can do it?
    any help is appreciated.
    VQ Power ------- SHIFT_W.O.T <br>
    03 Maxima 6spd VLSD -- 1/4 mile -- 14.12 @ 96.3
    92 eg Hatch b20vtec -- 1/4 mile -- 13.6

    Originally Posted by MMBmomoney
    i changed the vtec solenoid and nothing changed. in another post i saw "vtec fluid" where is that located and how do i check it?
    .
    Reply With Quote Reply With Quote
  2. 03-11-2009, 03:13 AM #2
    DirtyMechanic
    DirtyMechanic is offline
    283.5°.516&quot;(13.11mm) DirtyMechanic's Avatar
    Join Date
    Sep 2006
    Location
    Alpharetta, Ga
    Posts
    4,086
    Rep Power
    26

    Default

    if it really 1/32 then you need a new block. they will have to take to much off and the piston to rise above the deck and contact your head. POP!!!
    The G Spot Hero

    "Nitrous is like a hot girl with STDS, you know you want to hit it but your afraid of the consequences."
    Reply With Quote Reply With Quote
  3. 03-11-2009, 06:11 PM #3
    DaRussian
    DaRussian is offline
    95 teggy for parts DaRussian's Avatar
    Join Date
    Oct 2006
    Location
    Douglasville
    Age
    37
    Posts
    761
    Rep Power
    20

    Default

    Quote Originally Posted by DirtyMechanic
    if it really 1/32 then you need a new block. they will have to take to much off and the piston to rise above the deck and contact your head. POP!!!
    no i think its actually less then 1/32, where can i get this done?
    VQ Power ------- SHIFT_W.O.T <br>
    03 Maxima 6spd VLSD -- 1/4 mile -- 14.12 @ 96.3
    92 eg Hatch b20vtec -- 1/4 mile -- 13.6

    Originally Posted by MMBmomoney
    i changed the vtec solenoid and nothing changed. in another post i saw "vtec fluid" where is that located and how do i check it?
    .
    Reply With Quote Reply With Quote
  4. 03-11-2009, 07:24 AM #4
    AnthonyF
    AnthonyF is offline
    JDM TYTE AnthonyF's Avatar
    Join Date
    Aug 2003
    Location
    Cumming
    Posts
    24,318
    Rep Power
    61

    Default

    ^POP is an under statement. New block time. What kind of engine?

    -Ant.
    The Carbon Fibered R6
    Reply With Quote Reply With Quote
  5. 03-12-2009, 07:34 AM #5
    AnthonyF
    AnthonyF is offline
    JDM TYTE AnthonyF's Avatar
    Join Date
    Aug 2003
    Location
    Cumming
    Posts
    24,318
    Rep Power
    61

    Default

    ^Get a new block. You'll be wasting your money.

    -Ant.
    The Carbon Fibered R6
    Reply With Quote Reply With Quote
« TPS | ecu pinout »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!