aight so i need some help. i have a itr manifold on a b16a head. i need a throttle body gasket. but i dont know what throttle bodie i have so, is there any way to identify it or will and b series gasket fit?
throttle body gasket question
aight so i need some help. i have a itr manifold on a b16a head. i need a throttle body gasket. but i dont know what throttle bodie i have so, is there any way to identify it or will and b series gasket fit?
i dont know about marking on the tb. not all the b series tb gaskets are the same.
got any pix of the tb
if you have an itr manifold. order a TB gasket for a type r.
Post pics of the side of the TB that the gasket is going on for better assistance
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Standard bore TB? As the other guys have said, go and match it up. If it is oversized or you can not figure it out, you can always go to the autoparts store and buy some blanks and make your own....or just apply Honda-bond like I had to since mine was too big.
Last edited by JKOBD; 02-16-2009 at 10:24 PM.
www.JKOBD.com
00 Civic Street Car V2 coming soon
stop talkingOriginally Posted by JKOBD
Take the Throttle body up to your parts store and match it up with the tb...Just get it for the TB the motor came off of or just say 98 LS and go from there...Dont Match it up with the manifold they are all the same on that ..Its the tb that is diifferent
Correct
this is the front of it let me get one of the back
Up
up some one help me
did u get that gasket yet?
Paintless Dent Removal TechnicianCondemnant quod non intellegunt
Posting Permissions
Reply With Quote