Quote Originally Posted by bowdown201
So im assuming its an internal problem cause i took the center console out and nothings jammin the linkage or anything and i got underneath it and it was shifting fine. IDK why tho but when im driving it still sometimes wont go into 2nd or 4th. Any other suggestions?
unbolt the linkages and try "running it" through the gears by hand. also make sure the tranny mounts are still good. i worked on a mx-6 once (with linkages) and the tranny mount was busted. it caused the tranny to lean back a little, and the linkage was hitting the body. i wasn't getting enough travel on the shifter. it would go into gear "manually" but not with the linkages on.