RX-7 questions
i just got an fc and i got it on the low real low,but it has some minor problems,the tranny slip or something to do with the tranny(i.e the car is in gear and you gas it it will got to hi rpms like normal but wont pick up speed)were can i get it rebuilt and for how much? it needs a real bad paint job lol only 2 small dents,but were can i get body parts?any other info can help thanks in advance
92 DA9 with a b20 on 8lbs daily
DALLAS 8-4 1st in the nfc east
Clutch slips or a problem with the transmission?
Sprayglo in Duluth for paint
RX7club.com for parts
yeah the clucth slips,ive been reading my ass off on rx-7.com since this is my first 7 and i need all the help i can get
92 DA9 with a b20 on 8lbs daily
DALLAS 8-4 1st in the nfc east
ive done everything possible to my FC, lmk what you need
really just sounds like your clutch is slipping, you would usually want to upgrade this anyways.
rx7club classifieds is a haven
Syndicate
need your motor rebuilt pm me and ill tell u prices.. and for a paint job call my friend at (404)309-3387 and ask for William he is a badass painter, just say Jonathan sent you and he'll give u a discount..
Peek-a-boo mofucka what now?!
ey and your tranny problem is your clutch slipping.. so yea try a new clutch if it keeps slipping buy a tranny.. rebuilding a tranny will cost u around 600-700 bux..
yeah if it were the tranny it'd either keep popping out of gear, or the car wouldn't move at all. Or in some really bad cases, you'd be stuck in gear permanently. You just need a new clutch, the friction plate and possibly pressure plate are worn out.
^^ Yeah, I drew a frame of a man running on each fan blade. That is him running at idle
Oh you're in Marietta? I go to school at SPSU. I'll need to check out your 7 sometime.
^^ Yeah, I drew a frame of a man running on each fan blade. That is him running at idle
hey i have a stage 3 clutch give me a price but dont low ball.. let me know if you want it
thats the clutch wore out completely
RX7
What he said.Originally Posted by 1439/2000
when you get a clutch make sure you have a clutch removal tool. you can rent it from mazdatrix.com you pay for the tool and then you send it back and get your money back. but you have to have that to get the flywheel off.
and make sure you get they flywheel resurfaced. don't be ghetto
good luck man
You should re-surface the flywheel (cuts down on risk of chattering and slipping)...
By clutch removal tool are you referring to the pilot bearing removal tool? or the flywheel holder tool? I dont know of a tool that is needed to remove the clutch... The pilot bearing can be a bear, and the flywheel nut can be a pain...
- Chris
Maz-mart has body parts, And RX-7 club is decent but don't believe everything you read on there.
Try not. Do or Do not.
Posting Permissions
Reply With Quote
