Nissan 240sx: clutch slipping

[metal man77]

After replacing the clutch, slave cylinder, and bleeding the clutch. I still get some slippage.
Everythings fine when the car sits there for a few hours, but taking it out for a drive for 20 mins, the slipping starts.

Im thinking its time to remove the clutch damper?

If anyone knows any reasons for this, let me know

[sean8564]

did you bleed the air from both lines you have on at the slave cylinder and a box to the right of it with some lines that run up and down the car. you can just eliminate it and hard wire straight to the clutch line like it and i blead agian the problem was solved.