is my clutch gone??

[niner849]

so i have a 96 Integra with 145k on it and it won't go in to gear at all. I replaced the slave cylinder about 4 months ago. I thought there might be air in the line so i bled it alot and still can't move only other thing i can think of is the clutch... Is that it or am i over looking something? Thanks

[Sammich]

YES

TIME FOR UPGRADE

[twinj]

yep pimpin. Consider yourself in the market for a clutch.

[Barefoot]

YES

TIME FOR UPGRADE

yep pimpin. Consider yourself in the market for a clutch.

[AnthonyF]

They are cheap and easy to do.

-Ant.

[gsrteg]

Check the clutch master cylinder....check if the fluid is low and then check the clutch pedal to see if it is leaking fluid between the firewall and where it cable attach to the pedal....it usually leaks for all manual cars. If it is leaking, replace the CLUTCH Master cylinder (not the brake master cylinder, they are two different units), if you're cheap, then take it apart and clean the inside of the Clutch MC (usually gunk build up)....Then, flush the with dot3 or 4 brake fluid, bleed the system properly, and refill with dot 3 o4 brake fluid...Hope this helps ur problem.