Results 1 to 10 of 10

Thread: Need help welding on a honda block

Hybrid View

  1. #1
    the coolest dude eva WHT_EP3's Avatar
    Join Date
    Apr 2006
    Location
    lawrenceville
    Age
    37
    Posts
    844
    Rep Power
    20

    Default Need help welding on a honda block

    so i went to tunner fest to watch a **** load of fast car then my friend tells me
    "dude so do you wanna run my car" i was like sure....... so to make a long story short i launched it really hard and where the rear baracket to the rear motor mount bolts up to the engine block broke off and was left behind as i ran down the track and got a horrible 14.4
    ok the car is a 94 integra LS and my question is :can you weld that piece back on to the block? how much would it cost me? and who can do A GOOD JOB?
    cause i dont think he has the funds for a new engine right now
    this is my question for IA
    PLEASE help me out GUYS........
    FYCN in a rick james voice

  2. #2
    the coolest dude eva WHT_EP3's Avatar
    Join Date
    Apr 2006
    Location
    lawrenceville
    Age
    37
    Posts
    844
    Rep Power
    20

    Default

    bumP
    FYCN in a rick james voice

  3. #3
    Senior Member | IA Veteran
    Join Date
    Jul 2007
    Location
    Not on IA Anymore !!!!!
    Posts
    17,879
    Rep Power
    0

    Default

    pics would help

  4. #4
    I♥mydick ٩(-̮̮̃•̃)۶ FasTech's Avatar
    Join Date
    Mar 2008
    Location
    Middle, Ga
    Age
    36
    Posts
    12,577
    Rep Power
    36

    Default

    I'm pretty sure if you weld it back on, it will not be as strong as what it was! I mean you said you don't have the funds for a new motor, so you might not have any other choice... Just baby the car if you decide to do it.
    "Damn, Its Tyler"
    RaceReadyDevelopments

  5. #5
    the coolest dude eva WHT_EP3's Avatar
    Join Date
    Apr 2006
    Location
    lawrenceville
    Age
    37
    Posts
    844
    Rep Power
    20

    Default

    thanks for the response but some one told me that you could weld it back on and it would be stronger than before but he exchanged numbers with the owner of the car and not me but i just wanted to know if anyone here had the same thing happen to them and how did they fix the problem........
    FYCN in a rick james voice

  6. #6
    IA SITE SPONSOR! silversol's Avatar
    Join Date
    Sep 2005
    Location
    LAWRENCEVILLE
    Age
    40
    Posts
    10,211
    Rep Power
    37

    Default

    i have seen it happen with the trans it has two 19mm bolts. if thats what it is your best bet is going to be a new case for the trans because they are threaded in. if its teh one in the block you could weld it. but the block is aluminum which means no just any one can weld it not many people weld aluminum.
    Hella stock member!

  7. #7
    Senior Member
    Join Date
    Jun 2008
    Posts
    3,502
    Rep Power
    22

    Default

    If its aluminum I can give you a guy that will weld it up. Not sure what he will charge and if you would have to pull the engine for him to want to do it or not.
    BMW 750iL

  8. #8
    Senior Member BlueHatch's Avatar
    Join Date
    Jun 2005
    Location
    Green Acres
    Age
    44
    Posts
    1,830
    Rep Power
    22

    Default

    there were fast cars at tunerfest?

  9. #9
    Boost+84mm=FUN! carbon_crash's Avatar
    Join Date
    Nov 2005
    Location
    Loganville
    Age
    40
    Posts
    2,073
    Rep Power
    23

    Default

    PM BHoov(spell check), he does Tig welding. He welded up some aluminum wheels for me and did a good job. See what he says about it
    Ballin' on a Budget

  10. #10
    the coolest dude eva WHT_EP3's Avatar
    Join Date
    Apr 2006
    Location
    lawrenceville
    Age
    37
    Posts
    844
    Rep Power
    20

    Default

    well the problem is about to be solve with a new tranny as the guy said above,,,,, well thanks everyone for the feed back rep were given
    and hell yeah there were fast cars there........ there was a hatch running 11.00 and there was a couple of muscle there they were all right....... and that ridicoulusly fast integra with the JDM front end was there you know that is fast as hell
    and a red supra but i didnt see his time.......
    FYCN in a rick james voice

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!