civic si problems

[PRO®]

the other day I was driving down 285, and accelerated to about 85 or so, when a check engine light came on. When I checked the code, it gave a P1259. During the same day, my oil light flashed for a second(changed my oil the next day). I also changed my intake filter last week, and it was a little loose when I opened the hood, so i tightened the clamp. Any idea what this could be?

[mitch lab]

vtec system malfunction. make sure the vtec solenoid screen isn't clog. Check your oil level. Check the oil pump (might have gone bad).

[Tech5]

its burning oil, an ran low, when they run low in oil it will kick this code, keep it topped off

[PRO®]

thanks, how do i make sure my vtec solenoid screen isn't clogged?

[Tech5]

it un bolts with a 10mm take it off the side of the head, an it has a gasket/screen built into one...take the gasket out an clean the screen with carb/brake cleaner, an you are good to go