Camaro Z28
I need to know where the best place to find a Bellhousing, reservoir, slave cylinder, master cylinder, hydraulic line, and clutch pedal would be. The car is an 82 camaro z28. 305 HO. I believe they said an 85-59 (???) would work too. My buddy is changing it to an hydraulic clutch. He has checked year one and various other places. I thought I would ask some of you guys. Thanks for any info given!
Back to being stock and slow
I would scope out various junk yards for the hard parts, and your local auto parts store should have the hydraulic stuff. Put an add on www.streetcarforums.com, you will have a better chance in finding that sort of stuff on there.
Alright. Well it didn't come with hydraulic parts so I believe he is kinda piecing it together. The parts he needs the dealership said they discontinues, No local part stores have been able to help so far. I will let him know about the other forum though. He has tried z28.com but not much help. Thanks again man. Reps
Back to being stock and slow
Anyone else? Buddy has had this car for 6 years, hasn't been on road except for maybe 4 days in last year and a half cause of transmission problems... Any body maybe know of someone with the parts?
Back to being stock and slow
I'd try Craigslist if you haven't already. I was poking around for 4th gen interior bits today and noticed a LOT of 3rd gen part outs.
z28.com doesn't get as much traffic as other sites. I would try LS1tech or camaro source, but you might have better luck with LS1tech.
You might have to try broad keywords on craigslist, as I was finding 3rd generation part outs by searching for 1997 z28....
Good luck, if I find something I'll let you know.
thanks bro, I'll check out craigslist. repsOriginally Posted by Z28
I'd try Craigslist if you haven't already. I was poking around for 4th gen interior bits today and noticed a LOT of 3rd gen part outs.
z28.com doesn't get as much traffic as other sites. I would try LS1tech or camaro source, but you might have better luck with LS1tech.
You might have to try broad keywords on craigslist, as I was finding 3rd generation part outs by searching for 1997 z28....
Good luck, if I find something I'll let you know.
Back to being stock and slow
Vicious on z28.com has a full t56 swap, I think it would bolt up.....for $1600.
2007 Civic FA1 and 2005 Yukon XL Denali
Alright, I'll let him know. Don't think he has 1600 to throw down right now though. But if anything he can talk to Vicious. Thanks, reps to you
Back to being stock and slow
Found this as I searched google so the t56 swap would work.
Best Answer - Chosen by Voters
The swap is pretty easy.. Both 305 ans 350 (if the 350 is a chevy) are chevy engines, both will bolt up to same mounts, same trans, etc.
2007 Civic FA1 and 2005 Yukon XL Denali
Posting Permissions
Reply With Quote
