who can install coilovers on a 2003 civic??

[ballzdeep]

i have some skunk2 coilovers for my civic .. im new to the area. just wondering if you guys have any suggestions on who is a good installer .. ??? thanks

[teh_mugen18]

Vuong's Garage, or you could try to figure it out yourself if you're somewhat mechanically inclined?

[Barefoot]

pm sent

[bigdare23]

Vuong's Garage, or you could try to figure it out yourself if you're somewhat mechanically inclined?

x2

[ballzdeep]

im somewhat mechanically inclined .. i just dont have the right tools.

[southside]

where U live

[khaxnguyen]

werd ^, where you stay? i can come do it today or tomorrow

[G.C]

just do it yourself. you dont need that many tools. If you have Wrench, Breaker Bar, Spring Compressor, Balljoint Remover,Jack your good. and you can rent those at Advance auto and get your full refund back after you return it.

[southside]

Wtf is a ball joint remover?But yea what he said it aint hard most can be rented.

[ballzdeep]

i stay in the douglasville area ... i've tried to find a spring compressor everywhere .. and cant find one for rent? and godfather customs wants to charge like 400.00 just to put them on ... F that

[G.C]

Wtf is a ball joint remover?But yea what he said it aint hard most can be rented.

A tool used to remove the Ball joint? its where the lower control arm and the coilover connects at. sometimes its stuck together there so you need to get the ball joint remover. looks like this:

[ballzdeep]

i think im gonna need some help with this coilover bizzznass . . thanks man

[khaxnguyen]

lmk, im still down to do it

[southside]

A tool used to remove the Ball joint? its where the lower control arm and the coilover connects at. sometimes its stuck together there so you need to get the ball joint remover. looks like this:

Oh never used that before Just used a fork and hammer

[khaxnguyen]

Oh never used that before Just used a fork and hammer

everyone has their own opinions on what works best for splitting the ball joint and LCA, fork and hammer usually are the causes of busted boots but are cheaper and much easier to find if in need of one. The high tech, fancy BJR is much pricier and may be a little complicated to use for the average joe to use

[Gorilla Eg!]

Tom Hornsby is the manager @ a shop called "Acura's & Honda's Specialist"
- located @ 714 Veterans pkwy. on Tara Blvd. Jonesboro, GA 30236
- phone # = (770) 603-9197
- Tom is probably the nicest and one of the most knowledgeable individual's I have EVER met and his shop does GREAT WORk!

[HeLLo iM iZzY]

Tom Hornsby is the manager @ a shop called "Acura's & Honda's Specialist"
- located @ 714 Veterans pkwy. on Tara Blvd. Jonesboro, GA 30236
- phone # = (770) 603-9197
- Tom is probably the nicest and one of the most knowledgeable individual's I have EVER met and his shop does GREAT WORk!

Wow!

Thanks Wiki !

[Elbow]

$400?!

I'd do it for 150.

[ballzdeep]

thanks for the replies

[Uptown401]

give me $200 ill do it for u.....it be done in less then an hour...!

[Elbow]

I stand by my $150