project 94 Hatch

[pebojelly]

Of all the cars I have built in the past I have never made a write up or even taken pictures of the project.

So here goes.

1994 CX hatch no A/C no PS or PW or anything.
D16Z6 sohc vtec motor swap done about a year ago by previous owner.
vtec not working and cel on.
Nice rust in the rear quarters.
dents on the top near then antenna.
missing the antenna,driver side lip,front end slammed with eBay junk and way to low.
engine bay dirtier then a junk yard car,crappy paint on the valve cover.

Pics of the car as I got it.


After I got it raised it up and picked up and intalled the dr lip.





rust in the quarters.




After I gringed some rust away to see how bad it was.Painted with a rattle can to keep it in check until I found replacment panels.




Struts and coilsovers used to correct the ride.
Guy I got the car from had 2 sets of ground controls,I sold one set and kept the other.






Removal of the front end and begin sanding.





Panels for the rear to be welded in tomorrow and car will be in gray primer wating to get a nice white base clear painted by me.

[pebojelly]

I have one thing I need help with.
Which lip? and painted or not? Are these headlights and fogs very accurate JDM copies?

Headlight #1
Headlight
#2

[pebojelly]

No before pictures of the engine bay but here are the new ones.




Valve cover ordered and new timing belt,crank seal,cam seal water pump on the way through eBay but genuine Honda parts.
Very dry motor no oil leaks and no grinds in the trans.
I am going to change the manual trans fluid next week.

[pebojelly]

Final work to be done after the body and paint.
I am buying a y8 block to get a set of Vitara's and eagle rods,crank will be knife edged and micro polished,Oil squirters will be pluged and z6 head will go on.
t3/t4 turbo,chrome pro,drag mani and 3" down pipe.

Should make 300+ on 93 octane and over 400 on race gas @25-27 psi.

[cactusEG]

hell yea homie, I cant wait to see how it comes out...

[GSRteg®]

Have you thought about joining the EJ-EG squad?

[pebojelly]

no how is this done?

[pebojelly]

someone lay some info in my lap about the lips and headlights and fogs pleeeeease.

[MistaCee]

Oh I'd get a type R lip with the #2 Lights. Nice project I was going to buy it on CL but chickened out lol

[PURP]

head lights no... JDM eg6 head lights look just like USDM lights but are plastic and don't have the 3 nipples on them... corners are copies of Visions who is a Japanese company... fogs are replicas aswell... but corners and fogs would look sexy on it but headlights should be left alone or get the actual JDM ones...

Looks good so far from what you've done. +reps

[pebojelly]

NO MORE RUST YAY

The work progress pics where taken from my friends camera phone and will be loaded tomorrow.
I am selling my rota's to buy the paint and supplies to base clear this and get the lip and fogs.
Not that i am totally broke but i have sold all the spare parts off this car and everything has paid for the repairs and work done thus far.
And no this is not rattle can primer either,just old ugly gray,lol.

[FasTech]

Looks way better without the rust and I even like the primar better than the blue, that blue was really ugly..... But a nice champ white ans some polished slipstreams would look awesome.

[EJCallaway]

nice project

[tenn69]

nice

[pebojelly]

ready for wet sand and paint.paint might be put on hold for 3 weeks until I am back from Vacation.
Wheels are temp but looks good for now.