Gonna go buy an exhuast system for my Eg. Does anyone know any websites that have decent prices. looking for HKS or Apexi.
Gonna go buy an exhuast system for my Eg. Does anyone know any websites that have decent prices. looking for HKS or Apexi.
Last edited by Hondatypr636; 03-10-2008 at 10:57 PM.
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy
Can't really help with a specific source to get the best price, but I just wanted to throw this out there:
Try to get an exhaust that routes over the right rear lower control arm rather than under it. I know I've seen Apex-i and HKS exhausts that routed under the control arm, and the piping there usually gets destroyed if you car is lowered a good bit.
Just a tip from experience.
![]()
Nopi sells some Apex-i exhausts in the lower 400's last time I checked. I've seen them around 500 on other sites.
You can get an exhaust custom made for probably half of what you'd pay for a ready made aftermarket piece. I went this route because it seemed like nobody out there had what I was looking for, and I'm very happy with it. Some muffler shops even mandrel bend. I know there's a midas here in atlanta that does. They quoted me 349 for a mandrel bent 3 inch exhaust, so I imagine a 2 inch exhaust using significantly less piping would be much less expensive. Ask around and see what you find out. It's not about the brand name, but about how it performs, sounds, and looks, right? Good luck!
Also, if you absolutely want to buy an exhaust from the aftermarket, I know a lot of people swear by buddy club. They're apparently reasonably quiet and make good power.
Last edited by itsnotarex; 03-11-2008 at 09:37 AM.
"I get worried when it STOPS leaking."
i dont want anything real loud
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy
http://i153.photobucket.com/albums/s...teg01/DSCN.jpgOriginally Posted by B18C5-EH2
apexi exhaust that route over the rear lower control arm... well?
1. That's an Integra exhaustOriginally Posted by 404 THE DC4
2. I never said Apex-i doesn't make an over-arm exhaust, but I've seen a lot of their N1 systems for EG hatches that go under the control arm.
I'll find a pic of their EG exhaust and see if they still route them under the control arm.
Here is a pic on an EK hatch:
http://www.we-todd-did-racing.com/we...ZmQzMXk1NDE%3D
I will find an EG pic too. I've seen numerous EG Apex-i N1 exhausts that route like that, and if I'm not mistaken the N1 style HKS also goes under the lower control arm too.
If you get one of the quieter, not straight-through type exhausts from either company they go over the arm.
Here is the HKS Hiper on an EK hatch - it routes the same on an EG hatch too:
http://www.hksusa.com/images_products/1397.jpg
Basically the "race" canister exhausts from HKS/Apex-i route this way. Tanabe Racing Medallion goes over the arm, but the muffler/canister doesn't sit at the same crazy angle either.
Personally, and maybe because I'm getting old, I like the quieter oval exhausts these days. I'd look into the Apex-i WS Noir - it's a very low key matte black system that looks hella pimp IMO.
If my EG was my DD I'd ditch the Tanabe Racing Medallion (due to noise) and get the Apex-i WS Noir, but since it's not my DD I'll keep enjoying the VTEC scream at 8500rpm from the straight through canister.
Hey B18C5 are u tom?
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy
is the apexi gonna be good for now and when i boost?
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy
Tom is right, be carefull of what exhaust you get, most people destroy theirs with the UNDER styles.
I personally reccomend the Skunk2 Mega Power "R" if you plan on boosting. its a 2.75in exhaust, great price and great fit.
well guys i bought the apexi world sport II exhaust will post pics soon.
93 cx-project
12 Mazdaspeed 3-daily
07 R6- toy