roll cages

[ninabl]

i am looking into getting a cage installed in my car
i will buy a kit for it but need some one to weld it
i will bring you the car with everything ripped out
seats carpet ect
it will probally be a 10 pt. and who ever does it, it will have to meet nhra stadards
i will bring the car and cage kit just need to know how much you will charge me to put it in

[quickdodge®]

How about moving on over to the TECH sections with these questions, man. Later, QD.

[jmmx258]

i am looking into getting a cage installed in my car
i will buy a kit for it but need some one to weld it
i will bring you the car with everything ripped out
seats carpet ect
it will probally be a 10 pt. and who ever does it, it will have to meet nhra stadards
i will bring the car and cage kit just need to know how much you will charge me to put it in

Bring me a welder too, and you do all the grunt work i'd do it for 50 bucks lol


Of course..after you post this in the right section....So I guess...I can't say that...being as this is in the wrong section lol

[David88vert]

You will need o find a shop that has done previous cage work for NHRA. They do inspect the cage for real races. Make certain the kit is a legally allowed one. Read the rulebook first.

[speedminded]

You will need o find a shop that has done previous cage work for NHRA. They do inspect the cage for real races. Make certain the kit is a legally allowed one. Read the rulebook first.

exactly, a legal 10 point installed is going to run like $2,500 minimum.

You can try calling AutoFAB Motorsports in my sig and see what they say. Batlground and Mahdavi have both had/have NHRA legal cars so i'm sure they know where to go. All of the Raceworks cars were done by a pro nascar chassis builder for SCCA spec. As David said, you'll want someone that has specifically done NHRA before, just as if you were doing SCCA/NASA you would want someone familiar with their rules. The worst thing ever is getting to the track and not passing tech for something like that

[Vteckidd]

We have built tons of certified cages from Formula D, NHRA, NDRA, D1 , Drift Fury, Nopi Drift, etc

Heres some examples:
Honda Civic NDRA Race Car




Tiger Racing D1 Drift Car






Big Ballers S13




We also built Spoolins 700 whp EK Hatchback Rollcage for NHRA/NDRA . I have pics of it somehwere buti have to find it.

If you want more info you can email me at [email protected]

[Vteckidd]

We normally charge anywhere from $900-1500 to install a cage, thats you supplying all material. The "prefab kits" also have a habit of having to be SEVERELY MODIFIED to work. we have done about 5 of them, youll save money on materials, but not labor

[ninabl]

dang i didnt realize it was that much i have a buddie that had 1 installed in his malibu that he payed 200 and a 12 pack and it passed tech but the guy that did it got in a real bad car wreck

[Vteckidd]

certified cages are EXPENSIVE, and its something you need not cheap out on because its for YOUR safety

[ninabl]

i need to find someone to rent me a welder
i weld for a living just dont own a welder
here is the cage im looking at

http://store.summitracing.com/partde...5&autoview=sku

[Frög]

i need to find someone to rent me a welder
i weld for a living just dont own a welder
here is the cage im looking at

http://store.summitracing.com/partde...5&autoview=sku

wtf? are you retarded? or just a 5 yr old?

[sebastianHoff]

i bought an autopower roll bar, fits well and is scca certified. took me and a buddy about an hour to put it in.

[ninabl]

wtf? are you retarded? or just a 5 yr old?

why do u say that?

[ninabl]

i bought an autopower roll bar, fits well and is scca certified. took me and a buddy about an hour to put it in.

where did u buy it from?
what is the price range?
is there a website?

[ninabl]

ok i found the website now the new question is are there bolt in roll cages nhra legal?