90 da axles in a 90ef / b16a swap

[DrunkScotsman]

i bought the da axles because i read that they would fit ,when i got home i tried to put them in the hub from the outside just to see if they would fit , it was a no go , the da axles splines wouldnt go into my hubs the end of the axles wouldnt fit in the hole(i did get the da axles non-abs) any suggestions? , thanx fellas!

[RoadsterFit]

"da"=the

so confusing

[bigdare23]

"da"=the

so confusing

no

da = 90-93 integra


damn noob

[dorin48]

Double check the part numbers and compare to another set. Mix ups happen all the time, where did you source the axles?

[DrunkScotsman]

autozone

[b17a1db2]

i do know with my little knowledge about ef's, that the STD model needs new hubs with a b-series motor, cause of the splines on the axle won't fit in it. but not sure on what model you have

[DrunkScotsman]

dx

[dorin48]

ah there is the problem. ur a dx need new hubs. g/l with that