Results 1 to 10 of 10

Thread: 92 Civic Si... Power windows?

Hybrid View

  1. #1
    Certified Gearhead Rage's Avatar
    Join Date
    Jun 2005
    Age
    53
    Posts
    357
    Rep Power
    21

    Talking 92 Civic Si... Power windows?

    Has anyone here done or know of someone that has ever put power windows and mybe locks in a 92-95 Civic Si? If so how was it done? I have a few 92-95 Civic EXs that I can part out to get what I need. I have heard that there are missing wires in the dash and this was not plug and play.

    Anyone?...


  2. #2
    Vuong's Garage Vuongy_Dong's Avatar
    Join Date
    Apr 2005
    Location
    Duluth, G-nett
    Age
    44
    Posts
    3,586
    Rep Power
    24

    Default

    On EK's its a 6-8 hour job doing it from stratch. thats based on the instructions i had. you will need both door panes, regulators, door harness, and floor harness. you will have to take out all your seats, carpet, fenders (easier to run the harness thru). My conversion on my ek is a 6-7 hour job, as i had took my time on it. I remember reading that its the same on the EG's.

  3. #3
    Certified Gearhead Rage's Avatar
    Join Date
    Jun 2005
    Age
    53
    Posts
    357
    Rep Power
    21

    Default

    I have changed dashes in EGs a few times changing gray interiors to black. Would it be easyer just to swap the dash? I have at least 2 complet interiors. Just the motors were pulled from the wrecked EXs. Could you send me some pics of your car. Id like to see it.

    Thanks

  4. #4
    The Philanthropist Dirty Octopus™'s Avatar
    Join Date
    Feb 2006
    Location
    West Staines
    Age
    41
    Posts
    12,311
    Rep Power
    43

    Default

    Quote Originally Posted by Rage
    I have at least 2 complet interiors.
    do you have carpet and door panels that you wanna part with?

  5. #5
    Certified Gearhead Rage's Avatar
    Join Date
    Jun 2005
    Age
    53
    Posts
    357
    Rep Power
    21

    Default

    Quote Originally Posted by Dirty Octopus™
    do you have carpet and door panels that you wanna part with?
    Yeah I will have black carpet and my stock Si panels and I think another good pair of EX panels. Call me in a week or 2 and I will let you know what all I have.

    229-506-1974
    Mike


    Jdm_CTR:
    So all I would need to grab is the harness that comes out of the fuse box and goes to the left and right door correct? Easy to get out? Doesnt sound like this will be hard at all to do. Im going to part out the whole interior on Ebay after I get what all I want.

  6. #6
    The Philanthropist Dirty Octopus™'s Avatar
    Join Date
    Feb 2006
    Location
    West Staines
    Age
    41
    Posts
    12,311
    Rep Power
    43

    Default

    Quote Originally Posted by Rage
    Yeah I will have black carpet and my stock Si panels and I think another good pair of EX panels. Call me in a week or 2 and I will let you know what all I have.

    229-506-1974
    Mike
    Kewl will do! you'd be a life saver

    BRB, The Blue Dirty Octopus™

  7. #7
    Vuong's Garage Vuongy_Dong's Avatar
    Join Date
    Apr 2005
    Location
    Duluth, G-nett
    Age
    44
    Posts
    3,586
    Rep Power
    24

    Default

    Quote Originally Posted by Rage
    Yeah I will have black carpet and my stock Si panels and I think another good pair of EX panels. Call me in a week or 2 and I will let you know what all I have.

    229-506-1974
    Mike


    Jdm_CTR:
    So all I would need to grab is the harness that comes out of the fuse box and goes to the left and right door correct? Easy to get out? Doesnt sound like this will be hard at all to do. Im going to part out the whole interior on Ebay after I get what all I want.
    yes. the harness that runs from the fuse box. it runs thru the driver's side under the carpet to the back. you can disconnect it behind the rear panel. it also runs to the fuel pump. it also cuts across under the rear seat to the passenger side to the other door.

  8. #8
    Vuong's Garage Vuongy_Dong's Avatar
    Join Date
    Apr 2005
    Location
    Duluth, G-nett
    Age
    44
    Posts
    3,586
    Rep Power
    24

    Default

    Quote Originally Posted by Rage
    I have changed dashes in EGs a few times changing gray interiors to black. Would it be easyer just to swap the dash? I have at least 2 complet interiors. Just the motors were pulled from the wrecked EXs. Could you send me some pics of your car. Id like to see it.

    Thanks
    i didnt have to change my dash at all. the new harness just runs to your fuse box.

  9. #9
    AKA Black Paper Diary Bishop's Avatar
    Join Date
    Aug 2003
    Location
    down the yellow brick road
    Age
    38
    Posts
    10,089
    Rep Power
    34

    Default

    my buddy did a power window conversion on his '91 celica. He used a SPAL kit i think he got off of ebay.

  10. #10
    Certified Gearhead Rage's Avatar
    Join Date
    Jun 2005
    Age
    53
    Posts
    357
    Rep Power
    21

    Default

    Ahh, sweet. Im going to strip one of those EXs tomorrow. Im buying a 92 Si as soon as I get off of work so I will be busy fo sho. Thanks for the help.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!