My uncle left e a b16a longblock with only the block, head, and vtec solenoid.....I must know how I can identify which OBD this engine is LMK thanks
My uncle left e a b16a longblock with only the block, head, and vtec solenoid.....I must know how I can identify which OBD this engine is LMK thanks
ROTARY POWER!!
any b16a can be any obd, unless you want it to be obd2, then you need to change out the oil pump and have a sensor on the oil pump aimed at a gear on the crank shaft. If there is no engine harness then you can tell if its originally obd2 by that. other than that, they dont have an "obd" per say. Are you wanting to put it in your car, if so, what is it and what motor is in there.
www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel
I know its very gay but I blew my b18b in my DC and this is the only engine I have..I know B16 suck in a DC but I'm on a budget and it was free...
ROTARY POWER!!
if its OBD0 i got a PR3 for u...if its OBD2 i got a P2T ECU for u ...if its a OBD1..i will still have an ECU for u...so LMK!...lol
Thanks bro i'll hit you up maybe in two weeks
ROTARY POWER!!
kool![]()
its not realy gay in my opinin to put a b16a in an integra, it goes in a civic si they weigh about the same. integra XSI in japan had a b16a in it.
www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel
there are numbers on the head that tell you what month and year the motor was made in.Originally Posted by android
i.e.
if it says
0/9 9/1 <----- (these numbers are circled)
that means its a 92 motor made in september of 91 ( anything after 0/6 is the next year up)
but as SPOOLIN said... any motor can be any OBD for the most part.
Hope this helped![]()
BRB, The Dirty Octopus™![]()
ok... well... you're going to look at the first set of numbers.Originally Posted by android in PM
the 8/9 and the 0/6
that tells us it was made in June(06) of 1989 which technically works out to be a 1990 motor (anything after June is for the following year.)
So.... regardless if it was 89 or 90 its still an OBD-0
hope this helped.
BRB, The Uber Ultimate Dirty Octopus™![]()