Forum: MAINSTREAM PERFORMANCE

do you guys flash ecus yet for the genesis. 2010 2.0T rspec

This Price is for Mitsubishi Evo 8 and 9. I will get the X pricing in a second. Here is alil deal I decided to run: GSC S1 or S2 Cams

Ok I bought me a 90 240 sx with a fresh blacktop swap and now I'm wanting some gauges water temp boost gauge and fuel air mixture all the basics and a manual boost controller price installed if I supply the parts

I need a quote to replace the clutch on an 04 Acura RSX Type S

im doing and sr swap and i need a quote for a 3inch exhaust from the turbo back and also what tuning program can i use? is there something like hondata for except nissan labeled or do i have to use a greddy emange or aem ems? not doin it today just need to know what im lookin to spend

I'm dohc f20a swapping the Prelude. I talked to emino about modifying my F22a1 (obd2a) harness to work. But before I come up to do that, I want to get all my motor parts in. All I need now is a new water pump. Where can I get a waterpump for this motor? or what pump from another motor fits?...

Got a downpipe and exhaust mad ....AWESOME work! The quality is amazing. Custom work neverlooked so good :) James and Charles are cool ass cats too by the way. Top quality people and product.

Need to see how much an exhaust would run me given that I supply the muffler and resonator. Would also like for my 2.5" adjustable test pipe converted to a one piece resonated test pipe. Exhaust would be 2.5" all the way back and is going on my Del Sol. If you need more info on other bolt ons, I...

2.5" cat back with magnaflow muffler and stock tips on a 2009 370z. Thank you.

I BOUGHT A 93 240SX SHELL WITH A KA24DE MOTOR WITH THE TIMING CHIN TENSIONER BROKE AND IM WANTING DO DO A BASIC BLACKTOP SR SETUP WITH IT I WOULD LIKE A QUOTE PLEASE. NO IM NOT PLANNING ON DOING THIS TODAY TOMMOROW OR NEXT WEEK IM GOIN TO HAVE TO FINISH SAVING FOR IT BUT WOULD JUST LIKE A QUOTE....

clear your pms

Need quote on sleeves for a gsr block. Parts and installation..thanks

So I came into a nice little amount of money I been wanting a Lexus is300 for a while but I know I'll never be happy imma die hard Honda fan so I was hoping to get a price on doing a k swap the rsx-s one don't know the block code never got into the k cause I couldn't ever afford one lol but I can...

Hey guys, I need a very minor mod. I'm looking to have a harness bar made for my Datsun. I'm looking to up my safety a bit and harness is the top of my list. Can you guys do anything to help me? I'm on a low budget. Thanks! Matt-

05 wrx Price for parts and labor: -walboro 255 fuel pump -660cc injectors -equal and unequal length headers (hks and perrin) -PnP intake manifold -tial 38mm external waste gate -good but cheap electronic boost controller

How much to .........Valve......head.......Import Alliance.......Milkshake.......Bullfrog......Fart-mask.

alright mainstream, im planning on buying the parts and have you guys assemble everything together, and have u guys send out my built to wherever machine shop it is yall goto. heres the built up setup i have in mind. gsr head: Supertech dual springs + retainers, skunk2 valves, skunk2 IM, brain...

I need my limp mode problem fixed.. pm me what you have in mind http://www.importatlanta.com/forums/showthread.php?289214-92-GSR-Hatch-ECU-problems

I have a bare gsr block and I have everything to put into it, forged internals, stock crank, arp main studs, arp head studs, acl bearing n washers, oem water and oil pump, tensioner, and crank pulley. I have a gsr head I need the valve stem seals I need to be changed out of my head. I also have...

i have to b16 with a t3/to4e turbo on it, and i wanted to know how much it would be to get a full throttle tune and maybe a touche up for my partial throttle. please let me know, i'm looking to get this done with this week or next week.

I need a quote on a full suspension installation on my 1995 Eagle talon tsi. Looking to add aftermarket parts with some decent coilovers. Labor and price please. Also need a quote on an upgraded turbo and ecu.

just wanted to get a quote on a swap i want done on my 91 ef hatch. its a b20 swap,i bring all the parts.wanted to know how much ya would charge.i know ya do amazing work:goodjob: thanks MS.

Putting everything together and making sure everything is in a row before making the 2+ hr trip up there. I'll be running a 15G Kit on a stock D167y at 8 to 10 psi, looking for 200ish to the wheels. This is the list of everything I have so far: 15G Turbo Greddy Exhaust Manifold 2.5"...

I picked up an recently AEM standalone and was going to go boost in 3 or 4 months. I was wondering if there would be any point to go ahead and apply the AEM to my N/A b18b1 with Exhaust and Intake. How much power could you guys extract in a ballpark range? How much would it cost me? And how...

Hey, I have an 88 CRX Si, what would it cost to get rear discs? Can you guys supply the parts or do I need to find them?

In case I haven't told you, lately...YOU GUYS ARTE THE SHIT! Couldn't ask for nicer, more humble guys. Well, James isn't too humble, but then again, he IS "Da Great". Any way, thanks guys. I've always got your back!

K thnx 678-363-6789

hey, i have a 1991 mazda rx7 and i was wondering how much it would cost to get the engine rebuilt. ive heard great things about your shop and since i live in the powder springs area, i figured i would hit you up. in short, i just need the engine completely rebuilt as its not running currently....

I have a 92 civic with a blown head gasket on a d15b7 and was wondering how much for a head rebuild, a rebuilt head, and just a motor exchange. Trying to figure out the most cost effective plan.

I was trying to get the Recaro SRD's that Vteckidd was selling and I wanted to know how much you guys would charge to make the brackets for it... Thanks

okay I have a GSR getting built and I am wanting to tune it after getting built at mainstream... what prices and numbers can I expect with the following parts?? pr3 pistons arp rod bolts arp headstuds 3 angle valve job skunk 2 IM CAI 2.25 straight pipe... 4-2-1 ceramic headers

i was wondering if you guys made exaust for honda civics? and what about intercooler piping i want a race muffler that sounds cool and i install air conditioners if ya'll would be interested in swapping out work thanks in advance

Price Quote 2.5 inch down-pipe collector to a 3-inch full Side Exit Exhaust.. No cat, Straight Pipe Exhaust..

I met a guy at a local shop, he was driving a black miata, black wheels, tan interior, turbo, etc. He said that he came to you for tuning and that something happened and his pistons melted. He rebuilt the motor, came back, and it happened again. He didn't have anything nice to say about...

Hi, Ive been wondering about the Nistune system. My car is an A32 Maxima (VQ30DE), and I noticed that the type 4 board can be used with the Cedric (VQ30DET), so can that same board be used in my Maxima? And if so, if I did a hybrid swap (VQ35DE engine, VQ30DE ecu, pedal) would the board still work...

^^ while leaving the motor in the car. Well long story short, My compression on one cylinder is at 60 psi!! I didn't bothering checking the rest and did a wet test on the same cylinder. Doing so I got 90-100ish psi. Could it be bad rings or just that it's been sitting for nearly 9-10 months? My...

Can I have a quote for a mandrel bent 2.5in catback exhaust for a 96 nissan maxima?

by any chance ya have a b16/gsr tranny case laying around? need one asap lmk thanks in advance

I was wondering if I can get a quote to have a Garrett T3 install in my Camry 5sfe. I have everything, all I need is to have it bolt up and weld the down pipe to the rest of the exhaust.

im needing a 2.5 exhaust ran on my civic. i have the axle back which is already 2.5 so what i will need is the sections from the cat to the axle back. thanks.:goodjob:

Hello, I am interested in getting an exhaust system installed on a 1985 Nissan 300ZX (VG30E N/A, V6 engine). I want the catalytic converter taken off and just have a straight pipe all the way back into a glass pack. I was also thinking of getting a boso style tip coming out of the back. Please...