mcdonough sonic meet. 9-10-08

Printable View

Show 100 post(s) from this thread on one page

09-08-2008, 05:57 PM
spicyMSP

Quote:

Originally Posted by whitehart

what i lol at even more is donnie pushes his car harder than nick does the MSP and nick is the one who blows a motor

That what happens when Mazda cuts corners. The internals are identical to the NA 2.0
09-08-2008, 06:21 PM
boostleak

http://www.supramania.com/forums/ima...dead-horse.gifbump
09-08-2008, 06:26 PM
boostleak

New siggy Enjoy bishys
09-08-2008, 06:42 PM
Tech5

<< car is running!!!
09-08-2008, 06:53 PM
slostang

Quote:

Originally Posted by Tech5

<< car is running!!!

I can't wait to see it wed.
09-08-2008, 07:26 PM
slostang

Quote:

Originally Posted by spicyMSP

If i can get the damn head off, yeah, but it's not looking so good. I think i'm gonna need a breaker bar just so i loosen up the hex bolts that are on there.

I thought I'd never see the day when you need a breaker bar to take a head off. I mean, the head bolt is only like the most torqued bolt throughout the car. :thinking:
09-08-2008, 09:07 PM
spicyMSP

Quote:

Originally Posted by slovic

I thought I'd never see the day when you need a breaker bar to take a head off. I mean, the head bolt is only like the most torqued bolt throughout the car. :thinking:

Why do you think i'm baffled about this myself. It makes no sense, they should just unscrew pretty easily.
09-08-2008, 10:34 PM
OneSlow5pt0

Quote:

Originally Posted by spicyMSP

That what happens when Mazda cuts corners. The internals are identical to the NA 2.0

thats why gotta stick with mazda rotary:D
09-08-2008, 10:35 PM
slostang

Quote:

Originally Posted by spicyMSP

Why do you think i'm baffled about this myself. It makes no sense, they should just unscrew pretty easily.

it should be eaiser than removing the gas cap. :lmao:
09-08-2008, 10:38 PM
spicyMSP

Quote:

Originally Posted by slovic

it should be eaiser than removing the gas cap. :lmao:

How about this, you bring a 10mm Hex key over and you try to knock them loose. You'll see what i'm talking about.
09-08-2008, 10:40 PM
Tech5

I have installed many MP3 engines ! very easy!!!

Quote:

Originally Posted by spicyMSP

Why do you think i'm baffled about this myself. It makes no sense, they should just unscrew pretty easily.
09-08-2008, 10:40 PM
spicyMSP

Quote:

Originally Posted by HypnoToad

thats why gotta stick with mazda rotary:D

Yeah, and get 16mpg. Thanks for the offer, but I'll have to pass. Of course, the 2.3L that's been in use for the past few years is practically bullet-proof.
09-08-2008, 10:41 PM
Tech5

Mazda 6 and those newer engines ......never ever ever take the crank pulley off...If you do you would have to re time the engine which is a pain in the azz...and if you dont can you say Bent valves!
09-08-2008, 10:41 PM
slostang

Quote:

Originally Posted by spicyMSP

How about this, you bring a 10mm Hex key over and you try to knock them loose. You'll see what i'm talking about.

sarcasm > you.

but all out tools are 50% off at work. cmon by and I'll hook ya up.
09-08-2008, 10:41 PM
OneSlow5pt0

Quote:

Originally Posted by spicyMSP

Yeah, and get 16mpg. Thanks for the offer, but I'll have to pass. Of course, the 2.3L that's been in use for the past few years is practically bullet-proof.

just messin,u know Mazda is FTW in all models from MX3 to RX-7
09-08-2008, 10:42 PM
spicyMSP

Quote:

Originally Posted by Tech5

I have installed many MP3 engines ! very easy!!!

The only thing that i can think of is that i'm not doing it in the right order, but that should bear no consequence to the fact that not a single one of them wants to come loose.
09-08-2008, 10:42 PM
Tech5

Wish snap on was 50% off:(

They stick it to me each week! 175 weekly!:idb:

Quote:

Originally Posted by slovic

sarcasm > you.

but all out tools are 50% off at work. cmon by and I'll hook ya up.
09-08-2008, 10:43 PM
spicyMSP

Quote:

Originally Posted by slovic

sarcasm > you.

but all out tools are 50% off at work. cmon by and I'll hook ya up.

I have a 10mm hex key, i just don't want you breaking it. :goodjob:
09-08-2008, 10:44 PM
Tech5

if your taking the head off you always start from the center an work your way out cris cross pattern....and those are torqued alot...will take a good breaker bar!

BTW its lefty loosie,righty tightie !!!!!

Quote:

Originally Posted by spicyMSP

The only thing that i can think of is that i'm not doing it in the right order, but that should bear no consequence to the fact that not a single one of them wants to come loose.
09-08-2008, 10:50 PM
stillaneon

Quote:

Originally Posted by slovic

sarcasm > you.

but all out tools are 50% off at work. cmon by and I'll hook ya up.

I was wondering if he got the sarcasm or not.

lol

Josh, you might as well take you name off the list, you know your not coming
09-08-2008, 10:51 PM
spicyMSP

Quote:

Originally Posted by Tech5

if your taking the head off you always start from the center an work your way out cris cross pattern....and those are torqued alot...will take a good breaker bar!

BTW its lefty loosie,righty tightie !!!!!

Yeah, i have the service manual for the protege. I should have looked at it before i started trying to take it off.
09-08-2008, 11:08 PM
slostang

Quote:

Originally Posted by stillaneon

I was wondering if he got the sarcasm or not.

lol

Josh, you might as well take you name off the list, you know your not coming

why won't he be there?
09-08-2008, 11:09 PM
stillaneon

Quote:

Originally Posted by slovic

why won't he be there?

because he has the worst track record for actually showing up
09-08-2008, 11:11 PM
OneSlow5pt0

Quote:

Originally Posted by stillaneon

because he has the worst track record for actually showing up

this is true,the likeyhood him being there is the same as donni being straight
09-08-2008, 11:12 PM
slostang

Quote:

Originally Posted by stillaneon

because he has the worst track record for actually showing up

true. but he's 95% done with the hatch so I'm sure he'll be out there with it.
09-08-2008, 11:13 PM
stillaneon

Quote:

Originally Posted by HypnoToad

this is true,the likeyhood him being there is the same as donni being straight

Had to look at the spelling to make sure it wasnt me.

Thats a relief

I think you meant the chances are about as good as you not eating pickles Wednesday
09-08-2008, 11:14 PM
OneSlow5pt0

Quote:

Originally Posted by stillaneon

Had to look at the spelling to make sure it wasnt me.

Thats a relief

I think you meant the chances are about as good as you not eating pickles Wednesday

or u talking me into a photoshoot in the back of a van
09-08-2008, 11:17 PM
stillaneon

Quote:

Originally Posted by HypnoToad

or u talking me into a photoshoot in the back of a van

Your Mullet MAchine is the closest thing we have to a van. Unless Randall comes:lmfao:
09-08-2008, 11:20 PM
OneSlow5pt0

Quote:

Originally Posted by stillaneon

Your Mullet MAchine is the closest thing we have to a van. Unless Randall comes:lmfao:

speaking of that,what happened to us taking pictures of my POS?
09-08-2008, 11:21 PM
stillaneon

Quote:

Originally Posted by HypnoToad

speaking of that,what happened to us taking pictures of my POS?

waiting for you.
09-08-2008, 11:23 PM
OneSlow5pt0

Quote:

Originally Posted by stillaneon

waiting for you.

aww isnt that sweet...........what time u get off work weds.?
09-08-2008, 11:23 PM
redmanhart

Quote:

Originally Posted by stillaneon

Your Mullet MAchine is the closest thing we have to a van. Unless Randall comes:lmfao:

oh, i'll be there with the bag of candy, err.......camera...........yeah, that's what i meant lol
09-08-2008, 11:27 PM
slostang

Quote:

Originally Posted by HypnoToad

aww isnt that sweet...........what time u get off work weds.?

I want in on this. I need some good shots of my new paint.
09-08-2008, 11:33 PM
stillaneon

Quote:

Originally Posted by HypnoToad

aww isnt that sweet...........what time u get off work weds.?

Supposedly 6 but I am still here.....
09-08-2008, 11:36 PM
Tech5

we shall see....
09-08-2008, 11:37 PM
Tech5

I got to get my exhaust done tomorrow, its running off straight header
09-08-2008, 11:38 PM
OneSlow5pt0

Quote:

Originally Posted by stillaneon

Supposedly 6 but I am still here.....

ur still at work?

id burn that mofo down
09-08-2008, 11:40 PM
stillaneon

Well if you and chris wanna meet at 6:30 somewhere we can shoot for a while.

I need you to call me again
09-08-2008, 11:41 PM
OneSlow5pt0

Quote:

Originally Posted by stillaneon

Well if you and chris wanna meet at 6:30 somewhere we can shoot for a while.

I need you to call me again

PM me ur number
09-08-2008, 11:46 PM
slostang

Quote:

Originally Posted by stillaneon

Well if you and chris wanna meet at 6:30 somewhere we can shoot for a while.

I need you to call me again

I'll give you a call tommrow. I gotta wash the car beforehand.

Show 100 post(s) from this thread on one page