Newnan meets

[MeFryRice]

I'm pretty sure I saw Firby during lunch. Turning into Crosstown from 74.

[BluesClues]

if you can supply me with a constant high flow of biscuits, we're good! lol

I believe I can work that out

[h23bb2]

I'm pretty sure I saw Firby during lunch. Turning into Crosstown from 74.

Was one corner of the car about an inch and a quarter higher than the rest of the car? lol

I feel horrible for having left the car like that

[smoknlegend]

dang today is boring. maybe this weekend will turn out better than last weekend. maybe i could get started on my rear seat delete...

[Black4DrEK]

LOL

[firby911]

I'm pretty sure I saw Firby during lunch. Turning into Crosstown from 74.

You did

To the other steve,i picked that stuff up from jason and will give it a whirl in a little bit. Hopefully it will work this time around.

[h23bb2]

hopefully! If you want I can stop by later tonight. It'd be after 5. Gotta meet with my attorney @ 4:30......

[h23bb2]

dang today is boring. maybe this weekend will turn out better than last weekend. maybe i could get started on my rear seat delete...

Yank those bishes out!!! Shed the weight! lol

[chriskm]

I would like to make an announcement. *clears throat*

THE NEXT PERSON THAT COMES INTO RED LOBSTER AND DOES NOT REQUEST ME AS THEIR SERVER, I WILL UNLEASH THE FURY ON YOUR LIFE AND YOU DON'T WANT TO KNOW WHAT I CAN DO TO YOUR FOOD!!!!

That is all

if you can supply me with a constant high flow of biscuits, we're good! lol

^x2.
But I rarely go to Red Lobster. I don't like the food. Biscuits and that marguerita with all the shots and the upside down beer is good, though.

And, Steve, you woke me up. Ass hole.

[firby911]

hopefully! If you want I can stop by later tonight. It'd be after 5. Gotta meet with my attorney @ 4:30......

If you have time sure,if not no worries. I think i want to go a little lower on the front right as well but im going to wait to get the other coilover nut loose so i can get them even at the same time.

[h23bb2]

all right. I'll give you a heads up

[smoknlegend]

Meatless friday for me this friday, so that means pizza night. Anyone wanna go for some pizza at the bread company (right by carmike theaters) before the meet? it would have to be 6:00 or so cause they close at 7:30

[Mr Egg Rollllll]

I have to poo.





That is all.

[Schroeder]

Got my Distributor, now I just gotta get an Ignition box to go with it and I'm in business!

[Bacon]

Full interior gut......check
New rotas with tires......check
Silvia front end......check
Dyno tune this Saturday......check

Its coming together quite nicely.

[wonton]

well!

my new shell is now resting in my garage and i will be digging my hands into it very soon, i cant wait, i will be ordering my new DIYpnp EMS, new clutch, and will be sending my injectors off as well............moar boost soon to come.....then ill be going Vette huntin, hehe

[smoknlegend]

well!

my new shell is now resting in my garage and i will be digging my hands into it very soon, i cant wait, i will be ordering my new DIYpnp EMS, new clutch, and will be sending my injectors off as well............moar boost soon to come.....then ill be going Vette huntin, hehe

So is your ob2 going to be going into obd1?

[Black4DrEK]

well!

my new shell is now resting in my garage and i will be digging my hands into it very soon, i cant wait, i will be ordering my new DIYpnp EMS, new clutch, and will be sending my injectors off as well............moar boost soon to come.....then ill be going Vette huntin, hehe

Vette hunting... LOL..

Dont think so bud..

[Schroeder]

moar boost soon to come.....then ill be going Vette huntin, hehe

When you get it ready let me know. Buddy has a 00' FRC and I'm sure he'd be up for a fun run or two.

[wonton]

So is your ob2 going to be going into obd1?

yup! no more OBDII

Vette hunting... LOL..

Dont think so bud..

i know so bud!

the factory BP engine is capable of of 275-300 HP to the rear wheels and my car weighs less that 2200lbs!

i wont be able to out run a ZO6 but C5's are goin down, its been done before!

http://www.youtube.com/watch?v=QK0krHnx3jo

[Black4DrEK]

Dont get me wrong your car is Bada$$.. BUT its not THAT quick man..Ive heard threw the grape vine..

[Black4DrEK]

you dont have to post a vid bro

[tnomud]

yup! no more OBDII



i know so bud!

the factory BP engine is capable of of 275-300 HP to the rear wheels and my car weighs less that 2200lbs!

i wont be able to out run a ZO6 but C5's are goin down, its been done before!

http://www.youtube.com/watch?v=QK0krHnx3jo

How are you getting around emissions? I am fighting a loosing battle......

[wonton]

Dont get me wrong your car is Bada$$.. BUT its not THAT quick man..Ive heard threw the grape vine..

no not right now! im only boosting 7psi at this point in time!

when i get my 550cc injectors sent of to get cleaned and flow tested ill install them, turn my boost up to 15psi and get tuned and all will be good!

How are you getting around emissions? I am fighting a loosing battle......

right now i cant with a standalone ECU, when i swap to the new shell that is a OBDI ill tune my car for emmision with a cat installed and save that tune for emmisions time! after its done, my real tune will be loaded back in to the ECU and a test pipe as well!

[h23bb2]

yup! no more OBDII



i know so bud!

the factory BP engine is capable of of 275-300 HP to the rear wheels and my car weighs less that 2200lbs!

i wont be able to out run a ZO6 but C5's are goin down, its been done before!

http://www.youtube.com/watch?v=QK0krHnx3jo

I found this http://www.youtube.com/watch?v=kRJXFtyzcqw&feature=fvw
a little more interesting than your video of a FULLY built miata vs a C5 corvette with bolt-ons. Lets see you with stock internals take a C6 on the highway, strip, and road course.
Not being a smart ass, I'd like to see it go down. I don't know what the results would be.

[Black4DrEK]

I found this http://www.youtube.com/watch?v=kRJXFtyzcqw&feature=fvw
a little more interesting than your video of a FULLY built miata vs a C5 corvette with bolt-ons. Lets see you with stock internals take a C6 on the highway, strip, and road course.
Not being a smart ass, I'd like to see it go down. I don't know what the results would be.

ding ding ding:boobies:

[wonton]

I found this http://www.youtube.com/watch?v=kRJXFtyzcqw&feature=fvw
a little more interesting than your video of a FULLY built miata vs a C5 corvette with bolt-ons. Lets see you with stock internals take a C6 on the highway, strip, and road course.
Not being a smart ass, I'd like to see it go down. I don't know what the results would be.

i wont be able to take on a C6, thats already been stated, after forged internals go in and a bigger turbo then it will be a diff story!

oh and that reminds me, forged internals my be in my near future! hehe

[SHHHH]

Seans Miata is not even close to its full potential with its setup on 7psi haha. If you dont think his car is quick what does that make yours?

[wonton]

all those fucked up miatas in that video dont scare me!

im gonna be looking into a full cage though, after i have enough power to were i dont have to worry bout weight!

[Black4DrEK]

Seans Miata is not even close to its full potential with its setup on 7psi haha. If you dont think his car is quick what does that make yours?

quicker

[SHHHH]

quicker

Hahaha nice

[Black4DrEK]

yup

[tnomud]

yup

ZR1 killer too, right?

[Motivation]

Looks like Redmanhart (subbie), Player3044 (4 dr teg or tiburon), possibly Stillaneon, Yota06 (05 Benz), and I (probably in the benz) are riding down on Friday. Hope this weather gets warmer. See y'all then.

[wonton]

this guy is running 21.5psi of boost (with a built engine of coarse) he is running a 2860rs

http://www.youtube.com/watch?v=RhEIPjvIZno

my goals will be higher eventually! right now my goal is 15psi 275-300 rwhp!

[Black4DrEK]

Nope..lol you guys are blowing things up.. I never said anything bout running Vettes.. or anything to that extent..

But its quicker than the BOOSTED miata..

[SHHHH]

Sounds good Motivation, its supposed to be High of 57-58* and sunny Friday so it should be a nice meet.

[Black4DrEK]

this guy is running 21.5psi of boost (with a built engine of coarse) he is running a 2860rs

http://www.youtube.com/watch?v=RhEIPjvIZno

my goals will be higher eventually! right now my goal is 15psi 275-300 rwhp!

What are your numbers now man?

[Schroeder]

Looks like Redmanhart (subbie), Player3044 (4 dr teg or tiburon), possibly Stillaneon, Yota06 (05 Benz), and I (probably in the benz) are riding down on Friday. Hope this weather gets warmer. See y'all then.

Sounds good Motivation, its supposed to be High of 57-58* and sunny Friday so it should be a nice meet.

Sweet! I should be out Friday night. I might not be in the Shitbox, but I may still come out in one of the DD's. If everything goes well I will have the Shitbox out though.

I still gotta mount the Line Lock, install the New Mater Cyl, and if time permits and everything falls into place, install the new Dizzy and Ign box. I still gotta find an Msd Box somewhere though.

[wonton]

What are your numbers now man?

dont know yet! it hasnt been dynoed/or tuned yet! been waiting on the injectors and solinoid i need so i cant control boost with the ECU before i pay the money on the dyno!