Atlanta Dragway (Athens Area) Meet 8/25/07

Printable View

Show 100 post(s) from this thread on one page

08-22-2007, 07:56 PM
SRCRX

Quote:

Originally Posted by ThA~ShOcKeR

Some crazy ricer decided to go to the meet and just let shit fall out of his mouth!

I'm sure he was not the only one :lmfao:
08-22-2007, 07:56 PM
cactusEG

Quote:

Originally Posted by ThA~ShOcKeR

Some crazy ricer decided to go to the meet and just let shit fall out of his mouth!

knock his bitch ass in the mouth and swell it shut...
08-22-2007, 08:08 PM
DerrickT

Quote:

Originally Posted by SRCRX

I'm sure he was not the only one :lmfao:

lol
08-22-2007, 08:13 PM
SRCRX

What up D, hows OC bank thing??
08-22-2007, 08:37 PM
Double_0_Rusty

Quote:

Originally Posted by xb1

Hey Rusty, what year is your Si? I'll try to find a FSM for you somewhere. I know I have some CRX ones, but I need your year so I get you the right one.

Sup Todd, it's an 89. 1.6....thanks bro
08-22-2007, 08:39 PM
Double_0_Rusty

Quote:

Originally Posted by SRCRX

ALL TOQUE SPECS ARE IN FT-LB.

A/T Tranny Drain plug......................... 29
M/T Tranny Drain and fill plug..............30-40
Wheel Lug Nuts....................................80
Fuel Filter
Banjo Bolt............................................16
Service Bolt.........................................9
Clamp Bolt...........................................9

Valve cover Bolts...................................7
Spark Plugs..........................................13
Cam Gear Bolt.......................................27
Cam cover crown nuts.............................7
Crank(vibration) damper bolt...................119
Cylinder Head Studs....................1st step..22...2nd..49
Flywheel Bolts M/T................................76
Drive Plate bolts for A/T........................54
Header Bolts to Cylinder Head................22
Header to downpipe bolts.......................33
Intake Manifold Bolts..............................16
Oil Pan bolts...........................................9
Oil pick up tube bolts..............................17
Oil Pump to engine block bolts/nuts...........9
Oil Pump Screen bolts..............................8
Oil pump cover Screws.............................5
Oil filter Housing Bolts..............................9
Rocker arm shaft pedestal bolts................16
Rocker arm shaft end caps bolts................9
Timing belt adjstment bolt.........................31
Rod Bolts............................................. ....23

Main Bearings cap bolts
Separate caps and bridge..........................48
One piece cap assembly............................33
Water pump pulley bolts.............................9
Thersmostat housing bolts..........................9
Water pump attaching bolts.........................9

Fuel injection service bolts
88-90................................................ ......9
91up.............................................. ..........11
Throttle Body nuts.....................................16
Fuel Rail nut..............................................9

Manual Transmission
Countershaft locknuts................................65
End cover bolts.........................................9
Selector arm holder bolts...........................9
Tranny case to Flywhee housing..................20
Tranny to engine bolts
4 speed............................................. ........33
5 speed............................................. ........50
Clutch pressure plate bolts...........................19
Release fork bolts........................................22
Driveaxle/hub nuts.......................................134

Brake hose to caliper banjo bolts (front/Rear)...25
Master Cylinder Mounting nuts.......................11
Brake Booster mounting nuts.........................9

found this on Honda-Tech :goodjob:

that's all I needed......reps already given.
08-22-2007, 09:39 PM
SRCRX

Quote:

Originally Posted by Double_O_Rusty

that's all I needed......reps already given.

ya. Everything we need for our HONDA'S is on that site(H-T)
08-22-2007, 10:02 PM
Elbow

Just tighten that shit down, works everytime, its a Honda
08-22-2007, 10:07 PM
Double_0_Rusty

Quote:

Originally Posted by simontibbett

Just tighten that shit down, works everytime, its a Honda

lol I want to do it right.:goodjob:
08-22-2007, 11:15 PM
Flea

Can your mother sew? Boom.... get er to sew dat! Ya phuckin ginnie!
08-23-2007, 03:28 AM
SE-Rious1

Bump bump bump
08-23-2007, 06:02 AM
redrumracer

Bump
08-23-2007, 07:05 AM
coolcat

Quote:

Originally Posted by Double_O_Rusty

lol I want to do it right.:goodjob:

BOOO LAME.

x2 With Simon. It's a Honda shit don't break.
08-23-2007, 08:54 AM
xb1

Quote:

Originally Posted by coolcat

BOOO LAME.

x2 With Simon. It's a Honda shit don't break.

Tell that to the crankshaft I have buried in my garage minus a crank pulley thread. Just sheared right off one morning on the way to class. And I can't even begin to count the number of sheared bolt I've extracted this year alone. Ask Miles, he's only seen me work on 2 or 3 things, breakin' bolts off like its goin' outta style. :D
08-23-2007, 12:28 PM
Elbow

Well then something is wrong! Out of all the Hondas I have owned and raced, the only two major problems were on my 1st gen CRX the key on the camshaft and gear broke...and on my other CRX I snapped alternator belts non stop, and issues from wheel hop. Hell, my old EF I would run without oil to keep it from smoking because the rings were shot if it even still had any lol.

D series, FTMFW
08-23-2007, 04:47 PM
DerrickT

Quote:

Originally Posted by simontibbett

Well then something is wrong! Out of all the Hondas I have owned and raced, the only two major problems were on my 1st gen CRX the key on the camshaft and gear broke...and on my other CRX I snapped alternator belts non stop, and issues from wheel hop. Hell, my old EF I would run without oil to keep it from smoking because the rings were shot if it even still had any lol.

D series, FTMFW

D series are the suck.

B SERIES/ K SERIES FOR THE WIN.
08-23-2007, 04:50 PM
Elbow

D series cant break ;) lol
08-23-2007, 05:30 PM
DerrickT

Quote:

Originally Posted by simontibbett

D series cant break ;) lol

b/c they cant make enough power to break :slap:
08-23-2007, 05:32 PM
SRCRX

Quote:

Originally Posted by TheTurtle

b/c they cant make enough power to break :slap:

LoL, I can atest to that...:yes:
08-23-2007, 05:52 PM
rickgiblin

i would ride up with yall but i got a busted ass motormount and a busted passanger side axle... does anyone have either, i got a brand new d series axle for swap
08-23-2007, 05:54 PM
Elbow

Quote:

Originally Posted by TheTurtle

b/c they cant make enough power to break :slap:

:thinking: Last time I checked they could :goodjob:
08-23-2007, 05:56 PM
DerrickT

Quote:

Originally Posted by simontibbett

D series cant break ;) lol

contradict much? lol
I think I win.
08-23-2007, 07:28 PM
Elbow

Damnit you are too smart for IA leave now...

Oh yeah btw I wont make it to Tunerfest I will be cleaning cars all day.
08-23-2007, 07:29 PM
SRCRX

YA////What///YA
08-23-2007, 07:31 PM
DerrickT

Quote:

Originally Posted by simontibbett

Damnit you are too smart for IA leave now...

Oh yeah btw I wont make it to Tunerfest I will be cleaning cars all day.

yep. tips ftw.
08-23-2007, 07:32 PM
SRCRX

I got a tip for you....LoL
08-23-2007, 07:34 PM
DerrickT

Quote:

Originally Posted by SRCRX

I got a tip for you....LoL

yeah the tip I have for you is...
STFU. lol
08-23-2007, 07:39 PM
SRCRX

Quote:

Originally Posted by TheTurtle

yeah the tip I have for you is...
STFU. lol

Go bake me a pie...Bitch...LoL
08-23-2007, 07:40 PM
DerrickT

Quote:

Originally Posted by SRCRX

Go bake me a pie...Bitch...LoL

smile like a dough nut... slut. lol
08-23-2007, 07:43 PM
SRCRX

Quote:

Originally Posted by TheTurtle

smile like a dough nut... slut. lol

:lmfao:

Mr JDM, He does have alot on his car.
08-23-2007, 07:49 PM
Elbow

Quote:

Originally Posted by TheTurtle

yep. tips ftw.

Hell yeah
08-23-2007, 07:59 PM
DerrickT

Quote:

Originally Posted by simontibbett

Hell yeah

I saw Guy_Blow today lol
08-23-2007, 08:06 PM
SRCRX

Quote:

Originally Posted by simontibbett

Hell yeah

I'm sure you will make more in tips,than D.
08-23-2007, 08:13 PM
coolcat

Wow.. almost to 1k posts now.
08-23-2007, 08:20 PM
SRCRX

Quote:

Originally Posted by coolcat

Wow.. almost to 1k posts now.

LoL ,We likes to post in the ATH. what else is there to do??
08-23-2007, 08:22 PM
Double_0_Rusty

Im still leaking oil, but not as bad....most of the bolts on the pan were loose. I tightend them, and changed the oil, but I still have a leak. After this weekend, I am going to park it, strip the interior, jack it up and block it....take the header/exhaust off, and take the pan off and fix it. Also make the interior look a little freshened up.
08-23-2007, 08:29 PM
SRCRX

Quote:

Originally Posted by Double_O_Rusty

Im still leaking oil, but not as bad....most of the bolts on the pan were loose. I tightend them, and changed the oil, but I still have a leak. After this weekend, I am going to park it, strip the interior, jack it up and block it....take the header/exhaust off, and take the pan off and fix it. Also make the interior look a little freshened up.

You should put it up on a lift, you could see everything, I took my car down
to JOE's alot when I 1st. got it!!

And I did all kinds of shit to it!!
08-23-2007, 09:00 PM
coolcat

Quote:

Originally Posted by Double_O_Rusty

Im still leaking oil, but not as bad....most of the bolts on the pan were loose. I tightend them, and changed the oil, but I still have a leak. After this weekend, I am going to park it, strip the interior, jack it up and block it....take the header/exhaust off, and take the pan off and fix it. Also make the interior look a little freshened up.

I'd recommend you get under there and spray down everything with degreaser real good so its nice and clean, that makes it really easy to see where the leak is coming from.
08-23-2007, 09:01 PM
coolcat

999!!
08-23-2007, 09:02 PM
coolcat

POST 1000 BY ME WHOO HOO!!!!! :D:D:D:D:D:D:goodjob::goodjob::goodjob::goodjob::g oodjob::goodjob::goodjob::goodjob::goodjob::goodjo b::goodjob::goodjob::goodjob::goodjob::goodjob::go odjob::goodjob::eek::eek::eek::eek::eek::eek::eek: :eek::eek::eek::eek::eek::eek::taun::taun::taun::t aun::taun::taun::taun::taun::taun::lmfao::lmfao::l mfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lm fao::lmfao::lmfao::lmfao::lmfao::lmfao::lmfao::lmf ao::yes::yes::yes::yes::yes::yes::yes::yes::yes::y es::yes::yes::yes::yes::yes::yes::yes::yes::yes::y es::yes::yes::yes::cheers::cheers::cheers::cheers: :cheers::cheers::cheers::cheers::cheers::cheers::c heers::cheers::bump::bump::bump::bump::bump::bump: :bump::bump::bump::bump::bump::bump:

EDIT: POST NEEDED MOAR COWBELL.

http://www.marsneedsguitars.com/blog_pics/cowbell.jpg

Show 100 post(s) from this thread on one page