Project "OPPS I CRAPPED MY PANTS!!"

[kain86]

ok guys i've been gone for some times now and heres an update.
for those of you who have met me you know i have a white 94 4dr with a jdm d15b non-vtec. well i still have that POS in there but it's about to get a major make over. a few months ago i bought a d15b vtec fron swolejamacan(miss spelled) that was pNp'D then bought caseys built y8 head that started the project. then bought a t3/t4 tubular mani from another IA member. i followed that by finding an IHI RHB52 for $40. then an intercooler from ruptaker. which i traded to 95droppedhatchm for the big-as* intercooler that i have now. i bought some pre-bent IC pipping from SRE engineering for $130. bought a s40 tranny off LsTurboHatch. i also bought a SK2 cam gear and ClutchMaster stage 3 clutch from another IA member. right now i'm pulling both of the heads a part and im going to mate swole's head with Casey's internals which is made up of a SK2 cam, SK2 valve springs, SK2 TI retainers, and valves with a 2-angle on them. so pretty mucha complete SK2 head thats it for the motor so far....i thinks...... also just put SK2 lowering springs on with tokico blues in the back a some new sensa-trac gas rides in the front. it's a pretty smooth ride. im still looking for Eagle rods, Vitara or SRP pistons, VAFC2 or NEO, ACL bearings, and a custom DP. i'll have pics up later. also a type R lip so i can try to hide the bottom of the huge intercooler. lol. remember it's gonna be a sleeper.

[cactusEG]

I'm ready so see some pics... lol

[GSRteg®]

I'm ready so see some pics... lol

x2

[Grimm Reeper]

yea me treeeeeeeee

[Mad Mike]

x4

[GSRteg®]

We need dammit!

[dcshoeco]

Damn that nice..If pics arent up soon i'm gonna have to kick cactus in tha nuts..

[kain86]

heres some pics;

D15b vtec valve cover with T3/T3 mani


ports on d15b head


D15b head w/ d15b cam will get pics of SK2 when i go to friends shop


d15b/d16z6 mani port matched to head


Turbo cold-side housing after paint


i'll have more pics when it's light out.

P.S. kick them anyways!

[Grimm Reeper]

Single Cama Jama so you know that if you need any help with anything just to ask any of us on here and we'll do the best that we can to not only help a member, but a friend as well

[cactusEG]

Single Cama Jama so you know that if you need any help with anything just to ask any of us on here and we'll do the best that we can to not only help a member, but a friend as well

Yup, im down t help in any way i can

[dcshoeco]

I'm game as long as tony buys tha drinks lol..

[kain86]

heres a pic of the intercooler on the car.


i'll have more soon phone is just messing up.

[kain86]

side shot. needs paint. it's gonna be a panda. Champ white with jet, skyhawk or Granada black with a type r lips or maybe a ferio lip

[cactusEG]

thats a sleeper.. u should check out halfwits 4dr thread....

[kain86]

im gonna hide the intercooler with something. to make it look stock.....
and i've already checked out casey's thread just waiting for more updates.
mine look's like crap...i just need to hit it with a hammer a few times then BAM! instant sleeper.... :lfmao:
J/K....

[cactusEG]

im gonna hide the intercooler with something. to make it look stock.....
and i've already checked out casey's thread just waiting for more updates.
mine look's like crap...i just need to hit it with a hammer a few times then BAM! instant sleeper.... :lfmao:
J/K....

are u gonna do any head work to it?

[kain86]

heads already been port&polished by a guy from turbo dynamics in florida so said swole. plus it's getting all the SK2 stuff i have for it. not much more i can do with it. it just needs a bottom end so i can get it to 250-300whp. the motor only has 35k on it now so the bottom might hold together, but not gonna push it.

[GSRteg®]

kkk

[GSRteg®]

heads already been port&polished by a guy from turbo dynamics in florida so said swole. plus it's getting all the SK2 stuff i have for it. not much more i can do with it. it just needs a bottom end so i can get it to 250-300whp. the motor only has 35k on it now so the bottom might hold together, but not gonna push it.

Now remember Casey was pushing 280 at the wheels and the pushed it, but was fast as **** later on the engine blew SOHC FTW.

[GSRteg®]

See you guys at the V going over to Tony's house to see what up with my boy holla.

[puregroove]

ah, so that's the car...I'll keep an eye out for it next time.

[cactusEG]

**** guys i heard another memeber of the squad was going boosted, a blk 2dr? He most be a fuking pimp ! ! !

[GSRteg®]

**** guys i heard another memeber of the squad was going boosted, a blk 2dr? He most be a fuking pimp ! ! !

Ok Jose we all know its you...

[Mad Mike]

**** guys i heard another memeber of the squad was going boosted, a blk 2dr? He most be a fuking pimp ! ! !

I hate you

[cactusEG]

I hate you

I wuv u guys

[dcshoeco]

Cactus you dumb s hit..

[GSRteg®]

Cactus you dumb s hit..

lol

[cactusEG]

Fucck u guy's, im going home ....

[kain86]

i think the build is going to be on hold for a little bit. about to quite my job they keep screwing me. and im F*CKING tired of it. and not to mention 8.50 and running a store that makes 25k in a week...GAY

[cactusEG]

i think the build is going to be on hold for a little bit. about to quite my job they keep screwing me. and im F*CKING tired of it. and not to mention 8.50 and running a store that makes 25k in a week...GAY

Holy fucck u make about the same as me ... Damn dude i've love to see this car up and running boosted !

[kain86]

same here. i think im just gonna deal with the crap for now. until i can find a good paying job.

[cactusEG]

same here. i think im just gonna deal with the crap for now. until i can find a good paying job.

fuk that **** dont settle for any thing less. make them give u a raise ...

[GSRteg®]

i think the build is going to be on hold for a little bit. about to quite my job they keep screwing me. and im F*CKING tired of it. and not to mention 8.50 and running a store that makes 25k in a week...GAY

Damn dude that sucks **** them to hell... and you run the store emagine that.

[kain86]

got me some VX's from b18cEG i'll have pics up when there painted. but still can't decide if i want to polish the lip.....that sh*t takes forever...there gonna be black. maybe a lip if you guys can talk me into it...

[cactusEG]

got me some VX's from b18cEG i'll have pics up when there painted. but still can't decide if i want to polish the lip.....that sh*t takes forever...there gonna be black. maybe a lip if you guys can talk me into it...

i say go all white...

[kain86]

Cars going to paint this weekend... in a few days a panda shall be born.... also talked to john at phareable.net and im getting him to make a chip for my set-up. also should be getting downpipe made. also rims should be getting sandblasted this week just need to find the time to do them...i'll get pics up as soon as she painted. or you could come to the dalton meet and see it in person
MORE UPDATES SOON....

[cactusEG]

^^ Damn big money lol sounds like u have all kinds of goodies...

[GSRteg®]

Cars going to paint this weekend... in a few days a panda shall be born.... also talked to john at phareable.net and im getting him to make a chip for my set-up. also should be getting downpipe made. also rims should be getting sandblasted this week just need to find the time to do them...i'll get pics up as soon as she painted. or you could come to the dalton meet and see it in person
MORE UPDATES SOON....

Ah, good for ya.

[kain86]

CUSTOM 3" DP SHOULD BE GETTING FABBED FRIDAY ALSO BEFORE PAINT....HEHE:

[GSRteg®]

CUSTOM 3" DP SHOULD BE GETTING FABBED FRIDAY ALSO BEFORE PAINT....HEHE:

I see someone has some money!