obd0 to obd1 Distributor Conversion

[southside]

Well I have been looking for right ups and have found many but most are for ls harnesses or si civic harnesses.Which use seven plug connectors, well my car has two plugs for the dizzy on the obd0 side and of course the plug with the two wires was easy.But the other obd0 plug has five wires white,white,white/wblue stripe,Beige or orange,and Beige or orange/w blue stripe.My question is what wires do I match to the obd1 dizzy side plug which has 7 pins .And they are beige or orange/wblue stripe,Bluew/yellow stripe,bluew/green stripe,white,Whitew/blue strip,bluew/green stripe,Orange and yelloww/green stripe. I know alot of people will say just buy one from boomslang or ebay but I dont trust ebay shit and dont wanna pay for ecu conversion and dizzy combo that they sell and not just dizzy converison alone.

REPs for Useful Info because need me car running asap and only shit holding me back.

[blaknoize]

The only info I can give u, bacause I'm doing the same, is that mate all that can be mated with colors then just TRY the single wire that is unknown. If ur comfortable with that. When I do so ill let u know.

[southside]

I did it just need a tranny ground and imma try to start it and see how it goes.Thanks anyways

[blaknoize]

Ha, it wasnt all that useful, but thats what I will do. My particular wiring color is a lil different from yours. But if I do find definitive information I will post it here. Problem is... I hardly have internet access, so u will more than likely figure it out before I can even get the info to u.

[.:Stirfry:.]

what harness are you using again?
edit- i just say buy the jumper harness off ebay, for like 30 bucks

[blaknoize]

I believe this is one that is MADE, like mine is. Just matching the wires is the problem. Thanks to Honda and the color scheme.

[.:Stirfry:.]

I believe this is one that is MADE, like mine is. Just matching the wires is the problem. Thanks to Honda and the color scheme.

ohh lol.

[southside]

ohh lol.

Yea x2 dont really trust ebay stuff anymore after the ecu jumper I bought didnt work.Tried to see if rywire sold it he told me only with the ecu jumper combo shit.It couldnt be sold seperately

[southside]

I believe this is one that is MADE, like mine is. Just matching the wires is the problem. Thanks to Honda and the color scheme.

Yea aot of people have different colors listed on the diagrams that they made.But some of the colors fade and you can find the actual color,by looking at the dizzy plugs on the harness side that is under the loom.