What Does Your Engine Bay Look Like?Post-em

[southside]

^^^Its not hard at all

[Formally...]

Here are a few of my 4dr. It will be painted black and cleaned up when the new motor goes in. D16A6 bottom end, D16Y7 head, 220whp @9psi





GT28R turbo with a/c and p/s. It's tight but I haul my 2 kids around in this so I gotta keep it comfy.

[SL65AMG]

Here are a few of my 4dr. It will be painted black and cleaned up when the new motor goes in. D16A6 bottom end, D16Y7 head, 220whp @9psi

why use an A6 bottom end and a Y7 head? the Y7 is VTAAAKKK(right?) but does the bottom end have higher compression???

[Formally...]

why use an A6 bottom end and a Y7 head? the Y7 is VTAAAKKK(right?) but does the bottom end have higher compression???

I had a straight A6 that was in a hatch but a little too much NOS and it overrevved and bent a valve. I had the Y7(nonvtec) head laying around so I used it. The z6, y7,y8 heads have 1mm larger valves and this setup is about 10.3:1 compression. Good throttle response and good power with less boost.

[SL65AMG]

I had a straight A6 that was in a hatch but a little too much NOS and it overrevved and bent a valve. I had the Y7(nonvtec) head laying around so I used it. The z6, y7,y8 heads have 1mm larger valves and this setup is about 10.3:1 compression. Good throttle response and good power with less boost.

gotcha

[MrBoostedCRX]

^^^Its not hard at all

so hell him!

[SL65AMG]

^^^Its not hard at all

i didnt think it was. it seems pretty straightforward.

[mushroom_toy]

[EuroTra$h]

dude im lovin that car so much

[mushroom_toy]

dude im lovin that car so much

Thanks man.

[Thundercat]

Ivory

[Thundercat]

here's another one

[JDMJAYDC2]

what is that ?^^^^^ also what kind of mounts are you using looks like its sitting a bit higher than mine does im using hasport

[Thundercat]

hasport mounts and i did have to use 5 washers on both sides and i cut the lining of the hood some as well....i really need a CF zc hood

[southside]

Just a lil Tease

[B18C5-EH2]

Just throwing this out there FYI:

There are thieves that browse this forum, and I know of at least one person in this very topic that associates with proven/known thieves. I have seen users in the EF and EG sections that undoubtedly associate with a thief that was caught red handed with a stolen engine, transmission, and other associated parts on his Civic.

What I'm saying is that be careful when you show off what people normally can't see - it's somewhat of a "shopping list" for thieves.

[southside]

Just throwing this out there FYI:

There are thieves that browse this forum, and I know of at least one person in this very topic that associates with proven/known thieves. I have seen users in the EF and EG sections that undoubtedly associate with a thief that was caught red handed with a stolen engine, transmission, and other associated parts on his Civic.

What I'm saying is that be careful when you show off what people normally can't see - it's somewhat of a "shopping list" for thieves.

So true.

[EF-9]

Just throwing this out there FYI:

There are thieves that browse this forum, and I know of at least one person in this very topic that associates with proven/known thieves. I have seen users in the EF and EG sections that undoubtedly associate with a thief that was caught red handed with a stolen engine, transmission, and other associated parts on his Civic.

What I'm saying is that be careful when you show off what people normally can't see - it's somewhat of a "shopping list" for thieves.

x2!!! thats why i dont like posting pics of my car.

[sakasaku]

mine

[southside]

Mine again

[PURP]

[Thundercat]

eg...lol

[JEY$JDM]

LOL
Here is my beast!
Looks how it did basically when brad posted it.....
SRY-kinda shitty pic.....

[N/A EK]

My first EF (built d16a6)


When she was done, but no pic's of the b16a


2nd EF Si hatch (b16a2)




b20 DA, dont have better pic's



05 SE-R SpecV



94 DB8



98 EK hatch coming soon...