Very nice work. How much to do a Mazda 6 headliner (sedan) in black suede? Car is equipped with sunroof. Thanks.
Very nice work. How much to do a Mazda 6 headliner (sedan) in black suede? Car is equipped with sunroof. Thanks.
2013 Corsa Blue Optima SX 2.0T
That's clean....How much to do an 2010 F-150 Crew Cab? No sunroof
Thanks guys. Here are the prices for the headliner...
- If you uninstall it and reinstall it - $250
- If we uninstall it and reinstall it - $350
- If you want your side pillars added - $100
- If you want your rear deck added - $100
The prices is the final price you would pay and includes all materials and taxes.
Last edited by DynamicSound; 08-03-2010 at 01:41 PM.
That is not bad at all. I will def be seeing you shortly. Thanks.
2013 Corsa Blue Optima SX 2.0T
See you then.Originally Posted by Trini4U
Open Sunday 12p-4p - Now Open All 7 Days!!
Guys, we are going to start opening back up on Sunday from 12pm-4pm weekly. We did this 2 months ago and it was very busy for the first few weeks and then died off. So we are going to try it again so that we can offer service all 7 days a week. So no matter if you need a HID Kit, car audio, an alarm, or a pack of crimp caps...you can come get them anytime.
Our hours are...
Monday-Saturday 10am-7pm
Sunday 12pm-4pm
Any questions, call us at 678-622-7144 or PM me on IA. Thanks
Custom Enclosure Build - DC Audio - Single 12" Ported
Custom Enclosure Build - DC Level 4XL - Chevrolet Silverado
New Prices
hey i was jw .. if this deal is still available?
can it be installed in any car? and how much would it be to add keyless entry
Hey, yes it can work on any type of vehicle. Keyless Entry will be a additional system (you would have 2 different remotes) and would run you an additional $125. It is best to get an alarm/keyless entry system together and add the tilt sensor.
but is the offer still avaible? + installtion without the keyless entry?
yes
New Slim HID Kits Lifetime Warranty!!
Guys, we have our new line of slim ballasts kit instock. They whole kit is $75 and comes with a Lifetime Warranty through us.
We will be updating all our info soon, but wanted to let this news out.
Next week we will have a new regular ballast kit for $55 that will come with a 2 year warranty. So would you rather have a $55 kit with a 6 month warranty or a 2 year warranty?
Top ballast...our 2 year warranty kit. This ballast is over 1 year old and was in water for 4 months. We sold out of kits on Saturday (back instock now) and only had it. Sold to customer for $5 since he was on his third ballast and needed lights.
Bottom ballast...6 month warranty ballast dead for the third time.
Last edited by DynamicSound; 08-10-2010 at 02:12 PM.
Remote Control Lighting System - Brightness/Strobe/Breathe - Works On All Lights
Guys, we have a new Remote Control Lighting System instock.
This is a system that works with all types of lighting on your vehicle. This includes running lights, halos in your headlights, led bulbs, led strips, neon lighting, demon eyes, etc.
This allows you to control any lighting you hook up to it by remote. It is a very small system, that easilly installs anywhere. By hooking this to your lights, you can do the following functions...
Function 1 - On (4 levels of brightness)
Function 2 - Strobe (3 types of strobing)
Function 3 - Breathe (raises light from very dim to very bright)
All total there are 8 settings.
Please view our demonstration video. We have it install on our LED strips to show you the functions. Turn up the volume and we will walk you through each function.
Give us a call at 678-622-7144 or PM me if you have any questions.
Subwoofer Enclosure ReWrap - Get Your Boxes Wrapped to Brand New - Carpet Suede Etc
Guys, we are now offering a service to rewrap your enclosure.
If you have any type of enclosure and want to change the look of it, add custom logos, or simply make it look new again...we can take care of you.
Prices are based on size of the enclosure and material you want it wrapped in. So to get an exact quote...
This is just one example of a rewrapped enclosure. This is a JL Audio H.O. Box that is made by JL Audio. It houses a 12" JL Audio W7. The customer wanted something that was going to better match his interior color along with an accent color that will better match the exterior color of the car.
- Bring the enclosure to our store.
- PM me with a photo of the enclosure with details on how you want it to look.
- Email me with a photo of the enclosure with details on how you want it to look.
- Call us and tell us the style of enclosure and details on how you want it to look.
This is the JL Audio H.O. Stock photo. This box was built in 2002, so it was in much worse condition than this.
This is how it looked after carpet was removed.
This is how it looked during the rewrap.
This is how it looked after it was finished. We let it dry overnight and we cleaned it up in the morning for customer pickup. So the blue residue you see in these photos is not there now.
Where are you located still beside Varsity in LVile?
We have moved, but still across from the Varsity off Jimmy Carter Blvd.
6090 McDonough Drive Ste F
Norcross, GA 30093
678-622-7144
Thanks
Bump
Custom Enclosure Build - RD Audio - Quad 18" 4th Order Bandpass
Custom Enclosure Build - RD Audio - Chevrolet Avalanche (4 18's - 21 Cubic Feet)
This was done for a customer that drove from Louisiana to pick it up. It will be housing 4 18" RD Audio SHW subs. This is built with a 4th Order Bandpass design. It was built for the bed of the Avalanche with a blow through. It is lined in truck liner material and also has LED lighting inside of it. It has a removable cover for taking in/out the subs. The customer didn't have the amps hooked up and was missing 1 sub, so we couldn't get final photos once in the truck.
Custom Enclosure Build - RE Audio - Dual 10" Ported - Nissan Titan
Custom Enclosure Build - RE Audio - Nissan Titan
Custom Enclosure Build - JL Audio - Dual 12" Ported
The Top Custom Enclosure Company In GA! #1 in Quality, Design, Efficiency, and Price. Give us a call to design your box...678-622-7144.
This is made for 2 12" JL Audio W7 subs. It is made out of 3/4" Birch around the sides and 1" Birch front faceplate. It includes 45 degree corner angles and a rouded port wall to increase air flow. It has a center divider to prevent cancellation between the 2 subs. The interior is then lined with 2 layers of resin. It will be sold raw with no wrap.
Last edited by DynamicSound; 08-31-2010 at 09:23 PM.
Custom Enclosure Build - DC Audio - Dual 12" Ported
The Top Custom Enclosure Company In GA! #1 in Quality, Design, Efficiency, and Price. Give us a call to design your box...678-622-7144.
This is for 2 12" DC Audio Level 3 subs. It is made out of 3/4" MDF around the sides and 1.5" MDF on the front. It has a front baffle to so the subs will sit flush. It includes 45 degreen corners, painted port, and a recessed channel on the sides for a clean carpet wrap. It is wrapped in charcoal carpet. It comes with a custom DC logo on the back. The DC logo is in black carpet.
Custom Enclosure Build - DC Audio - Quad 10" 4th Order Bandpass
The Top Custom Enclosure Company In GA! #1 in Quality, Design, Efficiency, and Price. Give us a call to design your box...678-622-7144. Honestly, why would you pay a shop 2-3 times the price for 1/2 the quality??
This enclosure is built for an owner of an online forum. It is built for 4 10" DC Audio Level 4's. It is a 4th order bandpass enclosure for efficiency. It is made out of 3/4" MDF around the enclosure, 1.5" MDF subwoofer faceplates. They are recessed in for the subs to be flush mounted. It comes with a removable port for access to the subs. The port itself comes with a brace since 2 of the subs will be firing directly on it.
wow , how much for something like that
It would e $300-$400 depending on the size of the subs. That cost would be 4 subs, if it is less subs then the price would go down.
Custom Enclosure Boxes w/ Custom Logos - #1 Highest Quality Builds in GA! - SALE!
Sale over.
Last edited by DynamicSound; 10-14-2010 at 08:55 AM.
Just to show more work, here is one of our ads with some custom build photos.
Dodge Charger Custom System Build - JL Audio / Pioneer / MB Quart
The Top Custom Enclosure Company In GA! #1 in Quality, Design, Efficiency, and Price. Give us a call to design your box...678-622-7144. Honestly, why would you pay a shop 2-3 times the price for 1/2 the quality??
This was done on a 2006 Dodge Charge R/T. The customer wanted a custom installation, but wanted to keep it clean, functional and OEM looking. The stock headunit was switched out to a Pioneer Z110BT Navigation unit. He had MB Quart Components in front and MB Quartz in the rear. The customer did not want to modify the door or pillar to house the tweeter. So we duplicated the factory speaker pod and fabricated our own speaker pod to house both the 6.5" midbass and the tweeter. The customer had a 12" JL Audio W7, 500/1 amp, and 300/4 amp. Once again, he wanted to retain the spare tire compartment and have room in the trunk. So we made our Charger/300 ported enclosure along with custom amp racks on the sides. To finish it off, he wanted the JL/W7/Hemi logo on the box.
Last edited by DynamicSound; 09-07-2010 at 04:40 PM.
i need hids
for a 1990 240sx will also need a sealed beam conversion kit will u give me a price? im not sure what color i want maybe 10k 0r 12 i want a little tint of blue but i dont want all blue
PM'd
Bump...here are the last 2 photo after it was wrapped.
very nice!
is the port section removable? if so, how did you seal it?
I've always wanted to try a 4th order bp for an 8" L7
oh, and what's going to be powering the dc's?
I really miss my 15" level 4
Yes, the port area is removable so that the subs can come in and out. The port housing is bolted down which is the silver bolts you see in the final 2 photos.very nice!
is the port section removable? if so, how did you seal it?
I've always wanted to try a 4th order bp for an 8" L7
oh, and what's going to be powering the dc's?
I really miss my 15" level 4
If I remember correctly, a Sundown Audio amp.
Here is another 4th Order BP we just completed for 4 18" RD Audio HW's. It is 21 cubic feet for the bed of a Chevrolet Avanlanche.
http://www.importatlanta.com/forums/...olet-Avalanche
Custom Enclosure Build - Sundown Audio - 6 12" Ported
The Top Custom Enclosure Company In GA! #1 in Quality, Design, Efficiency, and Price. Give us a call to design your box...678-622-7144. Honestly, why would you pay a shop 2-3 times the price for 1/2 the quality??
This is a ported enclosure for 6 Sundown Audio SA-12's. It is 10.5 cubic feet tuned to 30Hz. The enclosure exterior is 3/4" MDF, the interior and faceplate is 1.5" MDF with flush mounting. The port is primered and painted in blue. It comes with sub dividers. We will be wrapping it on Wednesday when the material arrives.
is it ture
that yall are having a sale on HIDs this weekend and if so how much off....
i thought i saw something saying yall was but cant find it..
Yes sir, we have a sale right now on our $39 kits...only $25 INCLUDING TAX!! Sale will be ending soon. Thanks
Dodge Dakota Custom Fiberglass Door Panel Build - Crescendo Audio
The Top Custom Enclosure Company In GA! #1 in Quality, Design, Efficiency, and Price. Give us a call to design your box...678-622-7144. Honestly, why would you pay a shop 2-3 times the price for 1/2 the quality??
This is for a 2003 Dodge Dakota and will be fiberglass door panels to house 4 sets of component speakers. The customer attempted to do the job originally. The photos show how they looked in the beginning up to the final product. The panels were painted and had suede inserts.
This is how they first looked when we got them...
This is the during photos after the original job was removed...
And here is the final photo after the panels were painted.
sweet im coming up today to buy like three kits
Cool, see you then.
bought 2 sets 2day. Had some silverstars that didn't even last me a year. If these beat that then i'll be happy
Posting Permissions
