I am not responsible for your screw ups

Items needed:
-clear bumper lights(i got new ones)
-orange transparent vinyl(pic and website below)
-sissors
-hair blow dryer
-razor
-credit card

heres the lights



here is the vinyl (http://cgi.ebay.com/Orange-Transpare...QQcmdZViewItem)



the blow dryer



First: get one light then cut a piece a little bigger then the light, like below



Second: stick the vinyl on the light and make sure you dont have and air bubbles under the vinyl, i used a credit card when i was putting the vinyl on





Third: start at the top and push the vinyl down so i wll stick on the edge



Fourth: turn the blow dryer on and point it where you just rounded the corner, and the the vinyl will start to melt and take shape of the corner and the edge, complete this on all sides



and if you have trouble with the corners this is my corners looked like at first



Fifth: just comtinue to heat the side untill your satsified, this is what mine looked like







Sixth: for the lights with the screw holes, just take a razor and make a + in the hole



Seventh: after you made the cross just push the four corners down with the razor and blow dry in the hole, and this is what i got




and the finished product



on the car





You can also add more layers of the vinyl if you want them to be darker

But they are pretty close to perfectly the same color as the OEM ones with one layer

If you have and questions feel free to ask me, and if you are scared to do this on your own i can do it for a price, pm me if you them done by me

SO GOOD LUCK AND TELL ME WHAT YOU THINK OF THE DIY