Obviously first things first, get the car off the ground in order to get the wheels off of it.
Next thing we take put the wheels to the side and start to get them ready for a good old hand cleaning.
First we use a light de-greaser to take off any road debris and dirt.
After letting the de-greaser sit for a few minutes we rise with water.
Next we used clean towels to dry the wheels completely.
Use an air compressor to help get rid of any excess water in the nooks and crannies
After drying we decided to use micro-fiber clothes ensure everything was off the rims
After the wheels are completely dry we started to tape the tires off
When taping the wheels make sure to use 2"-3" pieces of tape to ensure a nice clean masking
Now its time to start to spray. We made sure to do MANY light coats at first. Here is what the wheel looks like after the first coat
Up close of the first coat
We proceeded to do light coats on all 4 wheels until the first can was out. After the first can was completely finished this is what the wheels looked like
Another close up of the wheels after 1 can was used on all four wheels
TO BE CONTINUED IN AN HOUR AFTER WE ARE FINISHED!
vBulletin Message