B-series Showdown

Printable View

Show 100 post(s) from this thread on one page

10-13-2009, 08:25 PM
ekcivic1991

it wasnt smoking to bad but you werent really on it.
what motor did you build
10-13-2009, 08:31 PM
kte324

Quote:

Originally Posted by ekcivic1991

it wasnt smoking to bad but you werent really on it.
what motor did you build

I was trying to coast, so that I wouldn't kill you with the smoke. Its a B16 with some other goodies.
10-13-2009, 08:39 PM
ekcivic1991

thanks for looking out and do you go to northside or did you graduate?
10-13-2009, 08:42 PM
kte324

Quote:

Originally Posted by ekcivic1991

thanks for looking out and do you go to northside or did you graduate?

I went to northside, I graduated in 08. I am a sophmore at csu now, transfering to GT next year.
10-13-2009, 08:42 PM
SoLJames95

Quote:

Originally Posted by mr.koupe

Not saying it isn't the jdm engine but you can't go by that code on gsr I know for a fact a few years usdm gsr's came with b18c... I had one that did... The jdm usually has jdm writing and such on the timing covers, also many companies that sell the jdm swaps will stamp them with co. And usdm/ jdm models...

Its only abt a 6 whp difference anyway stock/stock lol

:goodjob:

You had a jdm b18c too.. :ninja:
10-13-2009, 08:47 PM
delslo

haha

i can find axels way cheaper than that.. and goos luck with the 600hp
10-13-2009, 08:50 PM
-S Double C-

Quote:

Originally Posted by ekcivic1991

so your basically building a pro drag car but its gonna but like a daily? what are you looking for with all this hp? 9's

who me?
10-13-2009, 08:51 PM
-S Double C-

Quote:

Originally Posted by delslo

i can find axels way cheaper than that.. and goos luck with the 600hp

i was saying if you have the money to waste go with the best!
10-13-2009, 08:52 PM
delslo

couch killa

dc integra ls non vtec said he wants to try that jdm gsr slogan
10-13-2009, 08:57 PM
mr.koupe

Quote:

Originally Posted by SoLJames95

You had a jdm b18c too.. :ninja:

I've bEen through quite a few b series cars :D
10-13-2009, 08:57 PM
delslo

axels

350$ shipped 700hp

http://thmotorsports.com/innovative_.../i-148971.aspx
10-13-2009, 08:58 PM
kte324

Quote:

Originally Posted by -S Double C-

i was saying if you have the money to waste go with the best!

DSS FTW! I will upgrade to 3.9 after I get running.
10-13-2009, 08:59 PM
ekcivic1991

Quote:

Originally Posted by -S Double C-

who me?

yeah
10-13-2009, 08:59 PM
ekcivic1991

my buddy just had to leave GT, his gpa dropped to low majoring in aerospace engineering.
and he was like the the smartest dude in columbus a couple years ago lol
10-13-2009, 09:00 PM
kte324

Quote:

Originally Posted by delslo

350$ shipped 700hp

http://thmotorsports.com/innovative_.../i-148971.aspx

Dummy, they are $800 for the 700hp axles :screwy:, you were looking at the ones that support up to 200hp for $350.

http://thmotorsports.com/innovative_.../i-148980.aspx
10-13-2009, 09:08 PM
-S Double C-

Quote:

Originally Posted by ekcivic1991

yeah

nah it will be a street car, shooting for 600 on the single walboro and 10's then after i get some seat time ill get an aeromotive system and a precision 6262 and shoot for 700ish and 9's if i havent sold the car by then. My motor is good for 1000 not that i would ever want or try and make that much.
10-13-2009, 09:09 PM
delslo

lol

it was same part number... except for the 1st letter it through me off
10-13-2009, 09:11 PM
kte324

Quote:

Originally Posted by delslo

it was same part number... except for the 1st letter it through me off

You had me excited, then I was like damn.
10-13-2009, 09:11 PM
ekcivic1991

Quote:

Originally Posted by -S Double C-

nah it will be a street car, shooting for 600 on the single walboro and 10's then after i get some seat time ill get an aeromotive system and a precision 6262 and shoot for 700ish and 9's if i havent sold the car by then. My motor is good for 1000 not that i would ever want or try and make that much.

you lost me at aeromotive and percision 6262 but dang i wanna see this beast
10-13-2009, 09:12 PM
delslo

couch killer

rick said your shit never gonna be fast he got a dc for you with b18a1 na no nos
10-13-2009, 09:13 PM
-S Double C-

Quote:

Originally Posted by delslo

350$ shipped 700hp

http://thmotorsports.com/innovative_.../i-148971.aspx

http://www.modernperformance.com/blo...95-99neon3.jpg

you see the diff. between a dss axle and stock those innovative retain the stock skinny hubs and shaft. DSS's cost so much because there truely a much more beefier axle and you get a new hub setup.
10-13-2009, 09:19 PM
kte324

Quote:

Originally Posted by ekcivic1991

you lost me at aeromotive and percision 6262 but dang i wanna see this beast

Aeromotive makes really good fuel delivery systems and precision 6262 is a great turbo with I believe a billet wheel.

Quote:

Originally Posted by delslo

rick said your shit never gonna be fast he got a dc for you with b18a1 na no nos

Who are you directing this to?
10-13-2009, 09:19 PM
-S Double C-

Quote:

Originally Posted by ekcivic1991

you lost me at aeromotive and percision 6262 but dang i wanna see this beast

aeromotive (external fuel system) or might run the dual walbro setup. a 6262 is one of the new billet wheel turbos precision came out with, right now its one of the baddest turbos on the market right now its good for a bit over 700. Rich (99jdmls) can let you know how the beast looks he saw it and some goodies tonight while picking up a motor from me :ninja:
10-13-2009, 09:21 PM
delslo

and they are expensive but not the best these are the best and make most sense
http://www.gatorracingaxles.com/gato...tech-sheet.php
10-13-2009, 09:23 PM
-S Double C-

Quote:

Originally Posted by kte324

Aeromotive makes really good fuel delivery systems and precision 6262 is a great turbo with I believe a billet wheel.

Who are you directing this to?

me probably, rick is a friend of mine and his we all go way back! He messes with everyone. lol
10-13-2009, 09:25 PM
kte324

Quote:

Originally Posted by -S Double C-

me probably, rick is a friend of mine and his we all go way back! He messes with everyone. lol

have you got the sol painted?
10-13-2009, 09:29 PM
delslo

LOL

he said he was serious about racing you though. he said i got something for him then he laughed like a villan....
10-13-2009, 09:29 PM
ekcivic1991

how do i change title under my name? from ia junior member to something else
10-13-2009, 09:50 PM
VTEC~NO

Quote:

Originally Posted by delslo

he said he was serious about racing you though. he said i got something for him then he laughed like a villan....

oh yeah!! im serious i got something for that 600 whp..:2up:
10-13-2009, 09:54 PM
MrTurboCivic

when is tha showdown
10-13-2009, 09:56 PM
VTEC~NO

why so you can lose your first race against david..lol
10-13-2009, 09:57 PM
VTEC~NO

Brooks i want in the showdown
10-13-2009, 10:03 PM
harleyweise

forreal all yall talking that junk D-SERIES FTW and sean i fixed the busting up i just had to tweek some things
10-13-2009, 10:10 PM
VTEC~NO

wanna race harley? i got an ls..
10-13-2009, 10:11 PM
harleyweise

ls with what? plus im untuned.....:( but will be very very soon
10-13-2009, 10:15 PM
VTEC~NO

just a stock ls..
10-13-2009, 10:18 PM
harleyweise

hmmm......:thinking: maybe
10-13-2009, 10:18 PM
kte324

Quote:

Originally Posted by harleyweise

ls with what? plus im untuned.....:( but will be very very soon

acting like someone just did your timing belt.
10-13-2009, 10:19 PM
VTEC~NO

hopin i can race imr bseries too.. ?
10-13-2009, 10:19 PM
kte324

Quote:

Originally Posted by VTEC~NO

just a stock ls..

I'll run you.

Show 100 post(s) from this thread on one page