<<<Official Columbus, GA Discussion Thread>>>

[LIKEG6]

I'll text you around 9 justin. I go to sleep around 10 lol

[nycclaye]

anyone going out tonight?

[boosted347]

i may be for the first time in a while

[nycclaye]

let me know where and when!


Does anyone know of a good transmission shop? I have an Accord and I wanna get the seals on the transmission looked at. I don't know what the stealership would charge or if this Honda is any good since I have only been here a month.

[boosted347]

My dad owns a trans shop in phenix city he wouldn't charge to check it out and our hr rate is 65 which is cheaper than anywhere around as far as I know

[-S Double C-]

i might be out for a few after i do the usual and go get me a big ass steak tonight from somewhere

[nycclaye]

Shop name and number?

[boosted347]

Transpro...334-448-8092

[LIKEG6]

I worked at honda for 2 years there are some good guys up there. My wife still works there too.

[Fox351]

Brooks u get everything straight with you Teg? I might see you guys later on tonight. I more than likely will be at the infamous Sonic parking lot.

[nycclaye]

Do u know a silver mustang SVT Cobra That's about an 04-05 That's Turbo?!? I'm in my accord and he just went by. Impressive!

[LIKEG6]

Teg is still in atl supposed to go get it tomorrow

[justnprsh07]

anyone going out tonight?

i may come out in my dirty ass bmw after i ride by willards and help him

[justnprsh07]

Do u know a silver mustang SVT Cobra That's about an 04-05 That's Turbo?!? I'm in my accord and he just went by. Impressive!

if its the one i seen its an old guy that lives off summerville road clean as fuck and not slow at all

[justnprsh07]

anyone know of a orange eclipse around town suppose to be airbrushed

[boosted347]

i wont be out car ended up not getting a tag

[nycclaye]

I'm gonna swing out for a bit tonight to sonic in a while.

i wont be out car ended up not getting a tag

damn.. that sucks...

if its the one i seen its an old guy that lives off summerville road clean as fuck and not slow at all

yea, it didn't sound too slow either lol.. and it was clean... like I said, I was impressed when it went by. hard to find CLEAN and FAST cars nowadays.

[-S Double C-]

i wont be out car ended up not getting a tag

half the city drives around no tag or insurance

[99jdmLs]

ill prob swing out, depends on what time i get done with dinner.


realized today my rsx can tuck an 18 inch wheel, not the tire- but the wheel. . . .

[boosted347]

half the city drives around no tag or insurance

ha im not that half i choose not to risk it, especially when partaking in certain things lol

[SoLJames95]

So k series junkies. I want a fuel return system for the Ep, but can't find what I new or one for sale. Any info on this would be great or if anyone knows any kits forsale.

[nycclaye]

Have u thought about a walbro with a crushed fuel pressure regulator? I went That route instead and I run 70psi at 9k

[SoLJames95]

I have a walbro.... No fuel pressure regulator, but from what I read I need lines from the pump back to the rail. We have returnless fuel systems

[nycclaye]

Crush the regulator on the pump itself to increase and sustain pressure. No extra regulator needed.

[ultm8mind]

I might be out, Justin lemme know if you have that for me, that'd be tight. Also looking for a b series knock sensor. Other than that probably going to buy my O2 sensor for the Evo, she needs it especially with gas prices on the rise, lol....

[SoLJames95]

Crush the regulator on the pump itself to increase and sustain pressure. No extra regulator needed.

That makes them go bad way faster.

[justnprsh07]

I might be out, Justin lemme know if you have that for me, that'd be tight. Also looking for a b series knock sensor. Other than that probably going to buy my O2 sensor for the Evo, she needs it especially with gas prices on the rise, lol....

I got it if you want to swing by the house or I can bring it to town one day

[justnprsh07]

So k series junkies. I want a fuel return system for the Ep, but can't find what I new or one for sale. Any info on this would be great or if anyone knows any kits forsale.

Make your own... just add a inline walbro and a return line and put fpr on the return side shouldn't be hard at all

[nycclaye]

That makes them go bad way faster.

No. Comptech supercharger kits come with the fp crush tool. Its supposed to do that and is designed to sustain it from Walbro

[ultm8mind]

Justin, you'll probably have to shoot me your address, I'll come by whenever you have time. Thought I was going out tonight but something just went down and most likely I won't.....

[LIKEG6]

Anyone want a teg?

[-S Double C-]

told you id get it

[LIKEG6]

you said maybe lol

[Bacon]

Anyone have Ray's number? If so, can you call/text him and have him reach me? Trying to see if he'd want to buy or know someone who would want to buy my teg.

[jfryer496]

why so cheapon the teg?

[jfryer496]

cheap on *

[LIKEG6]

Teg is running now. Might be back up for sale soon though once I fix some stuff

[justnprsh07]

I'm about ready to sell or part out my hatch

[kte324]

I'm about ready to sell or part out my hatch

Well let me get a few parts.

[-S Double C-]

im about ready to sell my life lol car fell off jackstands fucked up a brand new paint job and the strap broke on my bike while on the trailer and it slammed into the rail and did 400 in damage