Lol. The only freebies I get anymore would be a lunch or dinner here and there.
Lol. The only freebies I get anymore would be a lunch or dinner here and there.
^lol that tranny still doin good? Lol. Perfect time to ask. Developed any probs?
-EASTCOASTEFCIVICS.COM- For Sale call or txt 706-615-2205 thanks Stephen*LOW, SLOW, AND BANGIN'*http://www.importatlanta.com/forums/...d.php?t=267561 <<<<CHECK MY BAGGED CHEVY
Yea it's still good dude. For now atleast. I have bad experiences with trannys.
thats not good. U dont beat the shit out of it so it should be find. Till ur Ninja build comes along. Lol. My new clutch is on the way and i am gonna start looking for mounts soon.![]()
-EASTCOASTEFCIVICS.COM- For Sale call or txt 706-615-2205 thanks Stephen*LOW, SLOW, AND BANGIN'*http://www.importatlanta.com/forums/...d.php?t=267561 <<<<CHECK MY BAGGED CHEVY
tj lives with his brother and pays the utilitys, he's just smart and knows how to manage money. He pays his own gas, food,and bills. He just dont eat out every night like me and tanger thats about it. I wished someone picked up my bills but its my fault, after i get my taxes and pay the credit cards i have off ill pretty much be retarded stable.
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
^Your sig defines bad ass
-EASTCOASTEFCIVICS.COM- For Sale call or txt 706-615-2205 thanks Stephen*LOW, SLOW, AND BANGIN'*http://www.importatlanta.com/forums/...d.php?t=267561 <<<<CHECK MY BAGGED CHEVY
Yea I'm usually in creep mode. I think I just need some new shift linkage which is like 150.
Thanks dude, mk3 is a little special.
Autronic SMC stand alone with reluctor, DIS-4 CD conversion, MSD coils
HX35r @ 43 psi, F/R fire walls
10g fuel cell, full A1000 setup with RC low imp injectors
Short ram intake made by yours truly
7 angle valves, TT Ti springs, schrick 272 cam, 43mm intake valves, reinze triple layer, ARP every(fucking)thing, P&P (cheating tho cuz I used to be the only one that did automotive machine work at JKJ Tool and Die in college)
Full tranny, quaife, spec stage 3+, 7lb steel flywheel
![]()
Cash > Merit
Pacification through Force
nice, you think you are putting down around 400ish?
no traction
this is hubby's engine bay. he is a clean freak
![]()
^ya the pics, That shit looks bad ass
-EASTCOASTEFCIVICS.COM- For Sale call or txt 706-615-2205 thanks Stephen*LOW, SLOW, AND BANGIN'*http://www.importatlanta.com/forums/...d.php?t=267561 <<<<CHECK MY BAGGED CHEVY
-EASTCOASTEFCIVICS.COM- For Sale call or txt 706-615-2205 thanks Stephen*LOW, SLOW, AND BANGIN'*http://www.importatlanta.com/forums/...d.php?t=267561 <<<<CHECK MY BAGGED CHEVY
What up Tony??
Those bushings are made in it.
I tightened it up the other day and it's stiff as shit now.
Yayyy, it's my birthday!
ur b day is today??
-EASTCOASTEFCIVICS.COM- For Sale call or txt 706-615-2205 thanks Stephen*LOW, SLOW, AND BANGIN'*http://www.importatlanta.com/forums/...d.php?t=267561 <<<<CHECK MY BAGGED CHEVY
yeah till i found out insurance was 500+ a month and that was claiming me and kendahl as being married, and her as the primary driver in my name is was 700+...and then was going through my real good friend danny (b18c1turboed) on here who owns his own insurance company geico,all state and state farm and them wont insure me.
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Technically yes lol since it's after midnight
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Well I didn't see his charcoal ass cause he can't answer a message.
43 psi is just fuckin ridiculous.
if the is300 insurance is anything close to sc300 insurance, it's not much. my insurance barely changed from the 97 altima.
http://www.youtube.com/watch?v=wEKLx...layer_embedded
response from 03RCode: Hell, it turns me on. I have a steel hard erection as speak
"Who Gives a Fuck" Crew Member #5
WooooooooHHHHHH!!!!!!!!!! Stevie Nicks!!!!!!!!!! Landslide. Damn such a good song
-EASTCOASTEFCIVICS.COM- For Sale call or txt 706-615-2205 thanks Stephen*LOW, SLOW, AND BANGIN'*http://www.importatlanta.com/forums/...d.php?t=267561 <<<<CHECK MY BAGGED CHEVY
in that case, what don't you just get the evo and put the insurance under his name???i think that will be alot better. imo
and 1000hp creats alot more traction probs then a car at 850. lol...also, weight plays a big roll with kseries. people don't consider how much one really weighs. (the kswap vs a d/bseries swap)
what cars does tony palo and chris miller run?
Last edited by 99jdmLs; 12-30-2009 at 11:11 AM.
exactly the weight is a big difference, and then they say this beast of a motor is going in a heavy insight? lol cause if i get a is300 im buying it cash, i cant go finance a 20k evo and say by the way ill be owning the car but the insurance will be in my brothers name, dont work that way done tryed that with one that was from florida last year. And i dont wanna get the car is his name by the end of the year i want a 800+ credit score
heres tony's teg he owns t1
heres chris millers civic he owns nrg-tech racing
![]()
Last edited by -S Double C-; 12-30-2009 at 11:41 AM.
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Miller has the camo EG b series hatch.
Thing is freakin sick nasty. Runs ~160mph traps.
makes sense on the evo vs is300. lolol
and a dswap weighs around 400lb less than a kseries i think. and a bseries is 100 heavier than a d...
now an integra weighs 2700lbs with a bseries..put a kseries in there and your prob sitting at 3000lbs.![]()
then you have a hatch with a bseries weighing in at 2200-2300lbs. lol....