wouldnt let batlground tune a go kart
wouldnt let batlground tune a go kart
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
No shop I go to will be tuning my car. I just want to rent dyno time. I do my own tuning. I'm just particular about the type of dyno as I want to do "steady state tuning"
"Horsepower is no substitute for brains, fuckers."
you could probably try to google an inertia dyno in GA
There is a Mustang shop right next to Mainstream that might have a dyno
anyone have b-series mounts find me some and let me know thankz
vtec on yall hater
I found a shop called Orton Performance that has a Mustang awd Dyno. I think they might be the winner.Originally Posted by T2KU
"Horsepower is no substitute for brains, fuckers."
Cool, what EMS are you tuning with?Originally Posted by WANTED
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Autronic
"Horsepower is no substitute for brains, fuckers."
NO they moved and Mainstream will let you dyno/tune ur car Pretty sure. You would have to talk to Charles, and it might a little more then a regular tune. I know hes done it before.Originally Posted by T2KU
Mainstream doesnt have a awd dyno
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
shoot me your number again James, i lost it. Actually scratch that, I'll get it from Ben.Originally Posted by LiLJames93
-jonathan
[/URL]
Jesus Christ is my Savior
No unfornately Batl ground does, but mainstream usually uses someone else for awd dynos.Originally Posted by -S Double C-
actually scratch since you just messaged me lolOriginally Posted by se7en
I don't have it either
why the hell isn't there one in Columbus????
Two of the most homo cars on IAFaggin' Wagon & Queer Kar
Absolutely.Originally Posted by shtbrown_ej8
"Horsepower is no substitute for brains, fuckers."
he done said he's not going to batlground its the wrong dynoOriginally Posted by LiLJames93
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Theres actually 3 if i remebered shops in the northern part of the ga. lethal injection another one. i cant think. damn it. oh well it will come to me.Originally Posted by -S Double C-
Columbus doesn't really have a big need for one. There was on called Penny Pusher's off of Veterans next to Groome and Harley Davidson but it closed down.Originally Posted by h23bb2
It's kinda like all the shops that have opened here other than PTAP have closed down just about. My goal is to open a import performance shop but the market here isn't right for it.
specialty shops like an import car shop require a HUGE market since they"re targeting such a small share. The main reason the PTAP hasn't closed down is because they're still selling a lot of parts online now.
Columbus car folks (as a whole) are too concerned with teh body kitz and dem pimp'n rimz to care about engine performance. Eventually that will change, but not for a long time.
-jonathan
[/URL]
Jesus Christ is my Savior
LOL at "dem pimp'n rimz "
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
x2 and it sucks because any good performance shops will just die out hereOriginally Posted by se7en
Hopefully when I open I can have enough business from the peeps I know around here to stay open
In a perfect world that would be awesome... however, friends come to expect hook ups - which doesn't help a business keep its doors open. I've experienced this firsthand working on airplanes; a quick "favor" turns into an afternoons worth of work which i would normally be paid for if it was just another customer.Originally Posted by T2KU
-jonathan
[/URL]
Jesus Christ is my Savior
I totally agree with that too. I'm going to be lookin in a industrial park soon for a space to put a lift in and have somewhere for the "crew" to work on our stuff. It's hard to work on my cars in an apartment building.Originally Posted by se7en
definitely agree with that one broOriginally Posted by T2KU
garages ftw
-jonathan
[/URL]
Jesus Christ is my Savior
lol yupp
at least you have somewhat of a garage
I wish we had something like that where I live
even with all the military brats with mommy and daddy's money? If a shop were to open up and could come out to britt on occasion with an unsuspecting, well built car that was extremely fast, don't you think it would grab some attention? Promote a new thought process among the "dummies" that come out now?
Two of the most homo cars on IAFaggin' Wagon & Queer Kar
you are at columbus state this semester, right?Originally Posted by h23bb2
http://www.youtube.com/watch?v=wEKLx...layer_embedded
response from 03RCode: Hell, it turns me on. I have a steel hard erection as speak
"Who Gives a Fuck" Crew Member #5
Most well built and extremely fast cars arent built by shops. Maybe stuff like the sleeves and valvetrains are done by shops unless you have acess to the needs which is usually highly unlikely. I dont have respect for a shop built car...unless its by the owner of the shop. Any one can drop off a car and pay money to have something built. But the problem with that is then 9 outta 10 they run around hollaring they built it.Originally Posted by h23bb2
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
Yea If I had a shop I would have a "shop" car which would be a tax write off but I would have to have it done in that year.
Most of the people that come to Britt care nothing about "fast". They care more for the looks and under glow lol. The "fast" cars are usually at Amercian Buffalo but it's too cold right now for people to do anything.
So i left my car parked outside last night, like an idiot.
Frost on the car FTMFL - i was irritated this morning.
-jonathan
[/URL]
Jesus Christ is my Savior
Yes, at least uhave a garage to keep it in. Lol. My door wuz froze shut this AM. I hate the coldOriginally Posted by se7en
i don't mind the cold, i just don't like how when the car "melts" when I'm driving with the frost melting, the car gets wet, which means it gets dirty... which means i have to wash it... and then wind up with a nice case of frozen hands.Originally Posted by 99jdmLs
stupid frost...
-jonathan
[/URL]
Jesus Christ is my Savior
SOOO True! And even now no one goes to AB either.Originally Posted by T2KU
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
anyone know who drives a clean ass white eg8 with bronze rota circuit 8's? It had a gwinnett tag and i believe it was a black guy driving. Seen him on veterans today.
I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!
never seen it I don't think
Quick tech question to all yo local peeps:
Ok so I got them there Buddy Club N+ coilovers on the hatch. If you're familiar with the design (and many other similarly designed full coilover setups), the height adjustment is independent from the spring pre-load. Everyone still on the same page? Ok so... The rears adjust fine, spring stays pre-loaded to upper strut mount, full setup adjusts down into bottom piece which is bolted to lca. Fronts, well... not so fine. The damn shit won't adjust down into lower piece which goes into the front forks, so I gotta just spin the upper perches and take most of the pre-load off the spring to lower my front any. This my friends is what I call "boo boo" and I'd like to fix it. Any suggestions on how I could go about "un-freezing" the threads? I know A.T. Himself already janked up a set of omni's by trying to do what I'm needing to get done, and I don't wanna repeat that.
Any takers?
Maybe I should post this in the General Tech forum.
hit me up saturday man, we'll get your coilovers fixed.Originally Posted by GetFRESH!
-jonathan
[/URL]
Jesus Christ is my Savior
and there ya goOriginally Posted by se7en
Hey Brooks do you know how to solder good? If so holla at me cause I'm coming down tonight.
what are you wanting to solder?Originally Posted by bigdare23
-jonathan
[/URL]
Jesus Christ is my Savior