<<<Official Columbus, GA Discussion Thread>>>

[ash7]

this guy...

hahahaha!

-jonathan

[UglyEFHatch]

this guy...

no no no it THAT GUY

[br@ndon]

oh my....

first off, you need to pray to jesus.

[chinese voice] and then - you need to drill a hole through the extension (I'm assuming it's a 1/2" type) and put some type of bolt through the hole.

[chinese] an thenn - you need to jam your flywheel with something (a flat blade screw driver would work)

[chinese] and theennn - you need to rotate the extenstion using whatever you can, like you're removing a screw.

if that doesn't work, try switching your prayers to Allah, and wail on it with an 8lb mallet in an attempt to work it back and forth out of the hole.

if that doesn't work - curse religion altogether, cut it as flush with the crank as you can and then drill it out. (hopefully it's a cheap extension so the steel is soft)

And now i'm all out of help.
-jonathan

thanks for the help, ive tried drilling in it as it sits now, thats not working. I have beat the crap out of it, it wont move. i do not want to buy another block but i guess thats my only option.

[ash7]

thanks for the help, ive tried drilling in it as it sits now, thats not working. I have beat the crap out of it, it wont move. i do not want to buy another block but i guess thats my only option.

i wouldn't admit defeat just yet bro. Soak the thing down with WD40 and leave it alone overnight - have you tried putting a ratchet or breaker bar on the end of the extension and twisting it out?

-jonathan

[br@ndon]

i wouldn't admit defeat just yet bro. Soak the thing down with WD40 and leave it alone overnight - have you tried putting a ratchet or breaker bar on the end of the extension and twisting it out?

-jonathan

i tried that, broke 3 of the sides of the extension where you stick in the ratchet. i will try the wd 40 but i dont know if that will even work cause i dont know if it will go down in the hole, i wont kick the bucket on it just yet if you say so.

[ash7]

i tried that, broke 3 of the sides of the extension where you stick in the ratchet. i will try the wd 40 but i dont know if that will even work cause i dont know if it will go down in the hole, i wont kick the bucket on it just yet if you say so.

As a last resort, you should consider pulling the engine and taking it down to C&B on Veterans... the machinist there is pretty good at little things like that... i wouldn't let him assemble an engine for me... but when it comes to stuff like that, he knows what's up.

-jonathan

[k u r y i s]

zip saw, then a little heat on the outside

then your 8lb mallet and a punch

[carguy07]

came into college with a 5 on the AP calc (B?) so i started in 2

calc 2 = integrations
calc 3 = complex vars
calc 4 = 3D and I diff/inte
calc 5 = 'solutions to engineering problems'

diff eq's too but i can't remember what class, maybe 3? I used a lot of drugs in college....

Also had physics 3 and thermodynamic systems 3

Yeah a 5 on AB would put you in calc 2, I did the same thing. Here your calc 3 & 4 are the same class. Solutions to engineering problems is probably close to Diff eq, it's a very applied course. Essentially the same work, but like I said most states do it differently.

Damn richard. All that stuff is just too confusing. I always just hated math so I just stuck to whatever I had to take lol.

Brooks I'll ruin your afternoon sometime talking about some of the math courses I have taken. Combinatorics is a ridiculous one that comes to mind, followed closely by Ring Theory and Sequences.

[LIKEG6]

Lol. Screw math. Who needs it? I just hated it so I never really tried too hard. Plus school pissed me off and is why I dropped out and got my GED anyway.

[justnprsh07]

He needed to do 400 if he had any hope at all... lol

[ash7]

Fortunately the biggest math used in aviation are various forms of Geometry - which was as far as i got in highschool after struggling with algebra for two years and finally passed with a 72 or something - went and aced Geometry...


go figure.
-jonathan

[k u r y i s]

Fortunately the biggest math used in aviation are various forms of Geometry - which was as far as i got in highschool after struggling with introduction to shapes and colors for two years and finally passed with a 72 or something - went and aced Geometry...


go figure.
-jonathan

corrected

[ash7]

corrected

no, i passed shapes and colors in fifth grade.

-jonathan

[99jdmLs]

geoetry i made like a 79 in....algebra and trig i aced. and yet i hate math-

we all know what i made in spelling

[ash7]

we all know what i made in spelling

did you even take spelling?

-jonathan

[kte324]

I never went to school.

[ash7]

Rich (PA) - you need to use your engineering skills and build something like this.



makes me smile every time.
-jonathan

[ultm8mind]

Carguy, you can assist? Maybe Rich (Pa)?? I know Rich (Ga) has offered but if you guys are Math GENIUSES or have taken probably way more than you need for the work I need done, I would like to get your help on an online course I'm taking. You think that's a possibility?? PM me for details and I'll give you my number. I'll probably shoot you both PM's, that's how much I ned the help, LOL. Rich (Ga) I do appreciate it TREMENDOUSLY, but I need to do VERY good on this!!!


Thanks Bruce

[ultm8mind]

200 push ups in a day plus the gym for 45 mins is exhausting

I do 78 in 2 minutes slicky boy

[k u r y i s]

...so only Rich (Ga) offered his assistance. Looks like we have guys that could really help me out, but only Rich said he'd help. Thanks Rich. Thanks everyone else.... for nothing.

hahahahaha

yeah, fuckers

[kte324]

hahahahaha

yeah, fuckers

haha, if they can't help, then send me a pm. I'll set you straight.

[ultm8mind]

hahahahaha

yeah, fuckers

yeah man, I put that before I saw you guys having a debate. Although nobody offered except Richie, I was like maybe Ol Rich (Pa) or Carguy can assist. Rich (Ga) sent me the PM and I read it, then wrotew my nasty-gram, LOL. Then I said maybe that's your guys way of offering, maybe it wasn't, LOL, let me know either way. Rich (Pa) and CArguy you have PM's!!!!!

[ultm8mind]

...so, just got a call from my wife and she tells me while they were eating in Augusta someone busted out the window in our truck and stole my kids PSP's and games. What a fucked up thing to come out of eating and on a weekend they're trying to get away and enjoy themselves. Not sure what else they took yet, but you know kids will notice that type of thing first, LOL. Fucking thieving fucks.....

[Friggintitsman]

Today was one of those days that reminds me why I really hate the army. We sat around for 6 hours today while all the other platoons are released so we could get a 15 minute class on the standard for how our gear should be set up. The more insulting part about it was that we have a SOP that tells us everything that we need to know. Other than that I'm still loving this shit.

[Friggintitsman]

BTW Ultimate I got orders to Fort Knox, but I'm trying to swap them or use any connection I can find to get my orders changed to 3ID

[ultm8mind]

BTW Ultimate I got orders to Fort Knox, but I'm trying to swap them or use any connection I can find to get my orders changed to 3ID

Not sure if I know any 11A's that could assist Friggin, but I'll check around and you gotta love the group punishment mentality, LOL

Will, I got your PM and will get that email to you shortly, thanks man....

[LIKEG6]

Isn't Fort Knox gonna be like obsolete now? They are sending a shitload of stuff here to Ft. Benning.

[ultm8mind]

Actually, somebody is moving out of Knox but there is someone moving in also. So, obsolete nah, just changing as the rest of the Army does.......

[99jdmLs]

I don't rem if i ever did take one actually....

and not a prob brucie....just lmk if i can help at all.


whats everyone got going on tonight?

[snowflake09]

I don't rem if i ever did take one actually....

and not a prob brucie....just lmk if i can help at all.


whats everyone got going on tonight?

Si > Gsr

[99jdmLs]

^this kid will argue with a dang stop sign just to argue.....jeeze

[k u r y i s]

black magic mother fucker

[ultm8mind]

brown magic

[br@ndon]

pulled cv axle on passenger side today, i am guessin its transmission fluid leaked out or oil, is this ok? was not leaking before.

[Friggintitsman]

Not sure if I know any 11A's that could assist Friggin, but I'll check around and you gotta love the group punishment mentality, LOL

Will, I got your PM and will get that email to you shortly, thanks man....

My BC at OCS use to work up there on Kelly hill. Maybe if I work myself in with him he can pull some strings for me. That's all the plan I've got unless I can get a swap.

[kte324]

[justnprsh07]

Aww is that for me for my hott ass car or sean catching the shop on fire

[LIKEG6]

Catching the shop on fire?

[SoLJames95]

Someone get these wheels!!!!! Da saw blades with 95% tires and 16oz with crappy tires. Lol

[ultm8mind]

Will, you have an email man.