not sure how Perelli makes their tires, but sounds like there may have been spot where the ply didn't fully join or was weak. could be a number of things, but you won't be able to tell unless you cut the tire apart to see.
Printable View
not sure how Perelli makes their tires, but sounds like there may have been spot where the ply didn't fully join or was weak. could be a number of things, but you won't be able to tell unless you cut the tire apart to see.
I'm not too sure either. I took the wheel off and was looking for a leak.. I saw the tread was separating from the sidewall in several places. You can hear it hiss when you put it above 30psi. I was reading about it and see what might have caused it. Poor tire construction, Low psi or too high psi, or too high speed for the rated tire. Well I know I've not gone over 100mph in this car.. so the last one is ruled out. I checked the tire pressure the last time I changed the oil and it was at 35psi.. so unless I ran over a nail.. hell.. I dunno :(Quote:
Originally Posted by allmotorEJ8
Yeah it's hard to tell while driving if it's low or not. That's why I hate real low profile tires. I had one low on an old set of wheels and ended up cracking it. If you can get some good pics of the tire where the seperation is I may be able to tell what was wrong with it.
man saturday nights arent suppose to be this shitty wasent anything to do
^budlight and the WII
lirl
so im stuck down in macon with 2 studs spinning on my driver rear
haha
chillin at joes right now
THANKS FOR REMINDING ME donald
lololololol. Everybody check out the buyer seller feedback thread about me! lololol. What a croc of shit!
Quote:
Originally Posted by Dirka Dirka
i just saw that. you should not sell bad motors :D was the motor tipped over any in transport? that causes smoke.
Quote:
Originally Posted by Patterson
lol. Not at all. I delivered it myself had it strapped down and everything.
that's fucked up. he prob. didn't put it in right. or fucked something up himself.
Quote:
Originally Posted by allmotorEJ8
exactly! Ive been buying selling and trading on here for almost 3 years and never had a complaint.....hell donnie came over and chipped the ecu and helped me get it running perfect.
thats funny ! how is he going to get mad ? even if you did sell him a fucked up motor , not saying you did , he cant get mad . if your buying a motor from someone i would expect the worst , not that its a brand new motor and will allow me to go to california and back .
I agree. Hell I bought a motor from Best Japanese Engines years ago and had to replace all kinds of things that broke when they shipped it overseas. I complained, but I didn't get all bent out of shape about it. Even tho it was a company that sold engines, I replaced the stuff and was on my way. Some people just can't acknowledge that kind of shit tho.Quote:
Originally Posted by 89preludesi
Quote:
Originally Posted by Dirka Dirka
I read on here this same exact situation and it turned out the guy did not install it correctly.
that guy is an idiot, i traded a ps3 and a b16 head for gt3's with NEW tires, and 2 were 50 percent, and 2 had horrible camber wear
he fucked the thing up himself trying to hit vtAAAAk and trying to get his money back.
fuck him.
And it's funny because in that SAME DAMN SITUATION that guy also when he started it that smoke was coming from the BREATHER. Fuck, I have to find that thread.
Like said, he did something wrong or fucked something up, and now he's trying to point a finger at someone else.
Quote:
Originally Posted by 89preludesi
Quote:
Originally Posted by allmotorEJ8
Quote:
Originally Posted by MINI
Quote:
Originally Posted by 96hatchCX
Quote:
Originally Posted by MINI
God i love rome. I miss you guys!!!:gay:
I miss Rome too. Sux living about 45min. away.
that is some BS eric...check out what i said !!!
we got you homie ! :DQuote:
Originally Posted by Dirka Dirka
sho do!!!!!!!!!!!
my honda broke again :( h22> motor mounts
im bored.
just got back from macon
been chillin with team dub r all weekend
haha
we cut my springs so im dumped now
but back sit lower than the front and its tuckin
haha
we cut 3 coils in front and 2 1/2 in back
rides smooothhhh
:boobies:
we still got that one movie dewd. fuck saw 6, shit is messed up!Quote:
Originally Posted by 96hatchCX
i have never seen any of the saws
LOL me cam and brit were like 6th graders watching their first "R-Rated" movie lol
Tomorrow afternoon +you + me + gamer = slackers
Quote:
Originally Posted by claybird
UNSHUN
They are amazing.
RESHUN
Quote:
Originally Posted by MINI
wtf is that?
dont forget to add in the saltine crackers and cheeze wiz.Quote:
Originally Posted by 96hatchCX
Quote:
Originally Posted by ducky1177
You'd have to watch The Office to understand.
I watch it way too much.
saltines and peanut butter
the office is the shit
where could i find a Vector Performance/Powerdyne kit for 1995-2002 3.8? or would a vortech supercharger work on a v6 camaro?
a vortech wont work, unless they make a kit which i dont believe they do. your best bet for f/i is a turbo.Quote:
Originally Posted by Brandon331
doin work tomorrow! hope to get the hatch slammed and ready to roll!
i got work at 11