The car is running -3 degrees in the rear and -2.75 in the front...
The camber kit will allow me to add a little more negative camber to get the wheels in some...I said I was not going to run crazy camber like -7 or -8 degrees to slam the car
The car is running -3 degrees in the rear and -2.75 in the front...
The camber kit will allow me to add a little more negative camber to get the wheels in some...I said I was not going to run crazy camber like -7 or -8 degrees to slam the car
Your Neogens will do just fine with a boosted automatic. The automatic, however, will not. I think it's been proven 200whp will kill a D series auto right away.
'92 C2500 6.5 Turbo Diesel | '96 240sx
ah, i want a 4 door now. =/ too bad nobody is sellin theirs..
That is what I have heard on the trans... But I'm gonna see what happens
You want life out of your tires, but I can already see where your cut springs are causing the fenders to slice into the tread of your tires?
Something doesn't add up..
Rubbin' is racing.
as long as its good for one pass hes good lol... crazy bastard
yeah and rhys is dumb it should be good for a few passes
figure of speech broski but really with him driving it ill give it an hour or 2......
No gay love you two... Be nice!!!
Get some 195/45r16, camber kits good suspension and you're good.
50 trim ebay XS power wastegate
greddy emanage
dsm 450cc
Y8 block
Y8 head complete rebuild
a/c compatible manifold
polished crank
eagle H beam rods
nippon racing 8.5:1 pistons
ARP head studs
installed my camber kits... just eyeballed my adjustments but will be putting it on the alignment rack to make everything even soon enough... thought i would snap two quick ones, i know it needs lower but still waiting on coils..
Hell Yes!! EBAY turbo kit FTW! GLW going fast yo...
^^^ I sense sarcasm!!! Lol
nice build get rid of that greddy e manage bullshit, s300 baby only $500 or u better off goin chrome
can he still stay automatic with chrome
car is obd2a and from all my research because of the automatic its a money pit to swap to obd1.... i would have to change to obd1 trans and trans module then get the jumper harness for automatic to manual conversion or swap the whole harness... i got the emange for stupid cheap and it will allow me to stay obd2 run a stock ex computer and be able to tune... if anyone has any other ways that does not cost buckets of money then please fill me in!
I give your props for doing a 4 door but you should really save your money and do things the right way.
Please explain right way? What do you see as me not doing right?
Cut springs, eBay turbo, poor choice in engine management, weak transmission. Better to leave your car stock and get good parts instead of cheeping out. That just my opinion though, my car is stock suspension and I would love a drop but I'm saving for coilovers. There is no way I would put lowering springs on stock shocks much less cut my springs.
If you want to upgrade to Emanage Ultimate, lmk. I've got the entire set up for sale.
Well if you read the thread it's just to get by... I know plenty of people running eBay turbos with no issues and make great power... If you don't like the engine management then you tell me what you suggest because I clearly stated I will take all knowledge offered... As for the trans it's an experiment not doing something wrong in my opinion... Last man this is a budget car with spare money that I have and scrounge up, I don't see a point in saving for months on end just to get name brand when I could get stuff that works great and gets me enjoying my project sooner... Just my opinion
I have no personal experience with ebay turbos, I went straight to Turbonetics. From what I hear though, they tend to develop shaft play much sooner than name brand turbos.
As far as Emanage vs Emanage Ultimate, You have more options and the ability to fine tune more with Ultimate. It is just a better all around setup. Kinda like going from S100 to S300. Again, selling my entire setup for $300. Includes all harnesses.
Can I run s300 on a stock computer in obd2a... Sorry haven't heard much about s300 in my talks with shops and tuners
on the head rebuild, crank, pistons and motor swap, but my opinion on everything else is right in line with everyone elses. But i figured i'd compliment you on what you did right
BUILT NOT BOUGHT .........
There is no right and wrong... Opinions are welcome... Just because I want to see what the automatic tranny can hold does not mean it's wrong, just not what YOU would do... As for the engine management every wants to say wrong but I see no one offering up answers to if I can run s300 on a stock computer and stay obd2
You would need to convert to obd1 for the s300. I'm sure you won't though since you want to build a cheap race car. And there is a right and wrong way to do things. With the way you are doing things now you are going to spend more than you already have just to replace the poor quality products you have purchased. All I'm saying is that you are wasting the hell out of your money just to be different.