TURBODAVE'S LATEST 240 CREATION( NO, IT'S NOT A FULL-RACE AND THE PRICE PROVES IT!!!)

[silviadriftr]

Dave just finished another 240/sr turbo and intercooler upgrade. Here's the list of mods:
Hi-Fi 60 turbonetics turbo
Unlimited Performance custom long tube manifold
blow-thru Z-32 maf
SAFC
HKS 550 Injectors
24x12x3 bar and plate intercooler w/ custom piping
Greddy type RS BOV

NUMBERS:
304whp and 264ft lbs at 11psi(at least until he puts the boost controller in!!!!!) Here are some picsdidn't get finished pics after the polishing and powder coating of the pipes but this is all I have at the moment)...

[silviadriftr]

couple more...

[WINDSOR]

sweet looking manifold there. Got any more pics of the car? What kind of power are you looking to get out of it?

[mocha latte cupcake]

dude thats a crazy manifold, i love it! once again turbo dave knows his ish...

[Repost Squintz]

damn thats a mean looking manifold

[silviadriftr]

sweet looking manifold there. Got any more pics of the car? What kind of power are you looking to get out of it?

Looking to do about 360whp at 15-17lbs. The customer has already left theshop. The customer took the car before I could get the finished pics of the job. I think he has some exterior pics of the car though. It's a 91-94 black s13 coupe which is pretty stock on the outside, but it does have an lsd, eibach springs and kyb shocks.

[silviadriftr]

damn thats a mean looking manifold

Love the sig man

[Cliff]

that is a beautiful manifold wow...and looks sweet

[£G2♣]

thats hot

[silviadriftr]

Oh, and the price for the manifold- 900.00 full stainless!!!! Lot's less than the full-race brand manifold.

[CodyW]

nice looking setup! what's the spool time like with that turbo?

[1439/2000]

nice looking setup! what's the spool time like with that turbo?

A couple hours. Nah shouldnt be too bad.

I like the manifold alot.

But the stock raditor fan shroud and I'm assuming head gasket all have to go with that setup.

[HiPSI]

hope they heat shielded the brake master cylinder before driving that thing very hard . it is purdy though.

[silviadriftr]

A couple hours. Nah shouldnt be too bad.

I like the manifold alot.

But the stock raditor fan shroud and I'm assuming head gasket all have to go with that setup.

Well, from what I understand, the customer didn't have the money yet to do an aluminum radiator, and dual electric fal fans yet. And no, he is still running stock head gasket and head bolts. Normally these motor will handle up to 400whp before the stock head gasket has to be changed. This is still a cokmpletely stock internal motor and has never been opened up.

As for the spool time, becuase of the stage5 exhaust wheel in it, it does spool a little later than smaller turbos. The cutomer says it starts around 3300rpm and hits maxboost between 3900-4000rpm. I will still get Charles to post the graph when I can get in touch with him.

[RiceBoy]

very nice. what gauge is the tubing in the first few pics? Because from the 1st pic, it is not a schedule 40 pipings. However in the car, it looks more like it due to the color changes of the metal from heating up.

[silviadriftr]

very nice. what gauge is the tubing in the first few pics? Because from the 1st pic, it is not a schedule 40 pipings. However in the car, it looks more like it due to the color changes of the metal from heating up.

I believe the piping is 1 and 3/4" ID and is .125 stainless on the thickness. The same as the full-race manifold. Also the reason it may look like that is because he has to thouroguhly clean the stainless pipe before welding and before the pipe is heated up on the car. If you don't anything that is on the manifold(grease,ect..) will be there forever.

[flysi00]

damn thats a nice ass setup damn dave does some nice setups

thats something what my new setup is going to look like just not as big of a turbo

btw brain what all do i new to do the blow thow MAF do i just move it to the other side ? and will it work just as good ?

[silviadriftr]

damn thats a nice ass setup damn dave does some nice setups

thats something what my new setup is going to look like just not as big of a turbo

btw brain what all do i new to do the blow thow MAF do i just move it to the other side ? and will it work just as good ?

Just make sure that you place the Maf in a straight piece of pipe for proper air flow reading and extend the wires. That's pretty much it. Now if you change over to the z32 you will need to wire it correctly and it does work better in conjunction with an afc or something that can manipulate input and output signals of the maf.

[flysi00]

Just make sure that you place the Maf in a straight piece of pipe for proper air flow reading and extend the wires. That's pretty much it. Now if you change over to the z32 you will need to wire it correctly and it does work better in conjunction with an afc or something that can manipulate input and output signals of the maf.

oh aight thanks man

yeah im getting close to finshing up my new setup cant wait till its done

[flysi00]

Just make sure that you place the Maf in a straight piece of pipe for proper air flow reading and extend the wires. That's pretty much it. Now if you change over to the z32 you will need to wire it correctly and it does work better in conjunction with an afc or something that can manipulate input and output signals of the maf.

if i change over to a z32 will it need to be tuned? or can i just run the car with the stock ecu fine ?

[silviadriftr]

if i change over to a z32 will it need to be tuned? or can i just run the car with the stock ecu fine ?

You can do a street tune on it if you have the afc. But there won't be anything to tune if you don't. Opinions varry on if you have to use the afc or not. Sometimes it causes irradic idle and things like that. That is where the afc comes into play.

[HiPSI]

i've never seen a Z32 MAF run correctly on a stock computer without at least an AFC to change the input/output settings.

[flysi00]

well i got a afc brain hit me up on aim i dont want to hijack your thread

[silviadriftr]

i've never seen a Z32 MAF run correctly on a stock computer without at least an AFC to change the input/output settings.

I have never seen it work correctly either. Have heard of some guys getting it to work without it but it could have been big fish stories

[silviadriftr]

well i got a afc brain hit me up on aim i dont want to hijack your thread

n/p, I.M. up.

[Formally...]

Sorry it took so long to get the graph up Brian. Here is the new graph that we just finished a few mins ago. This was with new plugs and at about 13-14psi. Later.

[silviadriftr]

Thanks Charles. I guess he had some plug issues. Good to see the ignition cleared up.

[Sirk]

My friend with the Blue 240, the one you had been looking at to buy before the sr swap, is running a z32 maf with no afc. He doesn't seem to have any problems.

[£G2♣]

nice ass shit...