f/s sony xplod amp
used 6 months works perfect. $80 obo
great for 2 10's or 1 12
Description:
600W max power
100W x 2 RMS into 4 ohms, 20Hz - 20kHz @ 0.08% THD
250W x 1 RMS into 4 ohms, 20Hz - 20kHz @ 0.1% THD
Class A/B
Variable 50-300Hz low pass filter
40Hz EQ boost
Line level through-put
MOSFET power supply
RCA & speaker level inputs
Specification --
Circuit system -- OTL (output transformerless) circuit
Power supply -- Pulse
Maximum outputs -- 200 W x 2 (at 4 ohms)
Maximum outputs -- 275 W x 2 (at 2 ohms)
Maximum outputs -- 550 W (monaural) at 4 ohms
Rated outputs (at 14.4V) -- 100 W x 2 (20 - 20kHz, 0.04% THD, at 4 ohms)
Rated outputs (at 14.4V) -- 125 W x 2 (20 - 20 kHz, 0.1% THD, at 2 ohms)
Rated outputs (at 14.4V) -- 250 W (monaural) (20 - 20 kHz, 0.1% THD, at 4 ohms)
Frequency response -- 5 Hz - 50 kHz (?3dB)
Harmonic distortion -- 0.008% or less (at 1 kHz, 4 ohms)
Input level adjustment range -- 0.2 - 6V (RCA pin jacks), 1.2 - 12V (High level)
Low-pass filter -- 50 - 300 Hz, -12 dB/oct
Low boost -- 0 - 10 dB (40 Hz)
Inputs -- RCA pin jacks, High level input connector
Outputs -- Speaker terminals, Through output pin jacks
Speaker impedance -- 2 - 8 ohms (stereo)
Speaker impedance -- 4 - 8 ohms (when used as a bridging amplifier)
Power requirements -- 12 V DC car battery (negative ground)
Power supply voltage -- 10.5 - 16 V
Current drain -- 25 A (at 4 ohms, rated output)
Approximate measurments -- 12-1/8" x 2-1/4" x 7-7/8" (wxhxd) not including projecting parts and controls
Weight -- Approx. 2.7 kg (6 lb)
Dimensions -- Approx. 307 x 55 x 200mm
Reply With Quote
