Box help

[fdiaz]

Hello i have two kicker solo baric L7 02 version and a alpine MRD 1005 2005 model. My problem is that i cant turn it all the way up cuz then its all distored but when i had a smaller amp (MRD 501) it didnt sound bad. The box i have it in is 3. cubic feet bigger then it should be. Think if i get a new box it would probly work fine and the distortion be gone? How much would someone charge to make me a box with the desging i want it in? I have a 2002 ford explorer, and if you want to see pics and want to pm so i can give you my ideas just pm me or reply to post. Thanks for your time hope some one can help me with this problem.

[BanginJimmy]

post up what you are looking for, and we can see how much it would cost.

[v3rd1g0]

would a box like this work?

http://www.proboxrocks.com/superbass/212SQSPB.shtml

[sina518]

is your box ported or sealed

[fdiaz]

v3rd1g0-
Thats the box i have the subs in right now. Its too big and i want the subs in there own chamber. And its heavy as crap. I dont mind the weight but it dont look nice. And when it does slid it knocks the crap out of my back.


sina518-
Its in a ported box. I did have a enclosed box but it was too small and looked like the sub was about to pop out.

I want it to cover the back and make it look like it came out of the factory. I still want to be able to use the first storage compartment, and not taller then the back seats. i want it to be from one side to the other but dont mind going the cheap way.

This is how the back looks like.


This is what i have in right now.

[fdiaz]

v3rd1g0-
Thats the box i have the subs in right now. Its too big and i want the subs in there own chamber. And its heavy as crap. I dont mind the weight but it dont look nice. And when it does slid it knocks the crap out of my back.


sina518-
Its in a ported box. I did have a enclosed box but it was too small and looked like the sub was about to pop out.

I want it to cover the back and make it look like it came out of the factory. I still want to be able to use the first storage compartment, and not taller then the back seats. i want it to be from one side to the other but dont mind going the cheap way.

This is how the back looks like.

http://pg.photos.yahoo.com/ph/mexica...88.jpg&.src=ph

This is what i have in right now.

http://pg.photos.yahoo.com/ph/mexica...68.jpg&.src=ph


P.S. I couldnt make the pics show so this is the link to them thanks again for the replies.

[sina518]

was that box made for thoses subs? see the problem with putting subs in a ported box is that the box needs to be built for the spec of that sub. when the box is sealed its a differnt story. but if you have 2 subs that call for 3 cubic ft and u have them in a 4 cubib ft box. its gonna sound like crap and distored and your gonna end up blowing your subs.( MY statement is not refering to you im just saying in general ) but unless you get the rigt box for those speakers dont turn that amp up your gonna fry the coils.

[sina518]

if you want a box built and you want a kick ass looking set up were everything looks flush and stable and clean give my guys a call at Traffic Jams car audio 770-271-3772. ASk for dan haynes or john marsh you can go to the website too and check some stuff out but its all old it hasnt been updated in a while

www.trafficjamsga.com