System installed (lots of pics)
Here is what was installed:
Front: Focal 165K2P Components
Rear: Focal 165CA Coaxials
Speaker Amp: Arc Audio 4050-XXK
Subs: 3 Arc Audio ARCv2 10D4
Sub Amp: Arc Audio 1500-XXK
Wiring: KnuKonceptz with a few Stinger and Monster goodies in there too
Electrical System: Optima Yellow Top
Sound Deadening: 1.5 Rolls RAAMmat BXT and 4 Yards of Ensolite Acoustical Foam
NO MORE PICTURES...NEW DESIGN COMING SOON
-Jordan
Last edited by rollininstyle2004; 10-09-2005 at 01:10 AM.
I like it.. Its real nice...
~Later~
i like it alot, gread design and good idea. just some small stuff to fix
edit: read you did the vynal....
get bigger pieces, wrap it under and staple it.
is that a jetta?
you need some better glue, some color match paint, some fans a little plexi work some neon lights and you would be rockin
:boobies:
Its a PassatOriginally Posted by Spyder Man
is that a jetta?
you need some better glue, some color match paint, some fans a little plexi work some neon lights and you would be rockin
I already said im going to be fixing the vinyl
The car is black and most of the equipment is black as well so with a color matched enclosure I felt it would get lost. I already have two tone leather (black with grey inserts) so I carried that theme over to the system install.
Plexiglass isnt worth it IMO, I would NEED fans to keep the amps cool and fans are ugly (well most of them) and hard to install cleanly, plus I think it looks good like this.
I do have a neon behind each cover for the amps, but 1 of them is messed up so when I get the new one they will be wired up.
that would be nice if it didnt looks so shitty.....
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
What do you mean?
GOOD IDEAS, JUST NOT FINISHED WELL... the material is falling off , panels aree cut to large for amps ect... good idea.....
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
First off I already said I need to work with the vinyl TWICE in the thread
Secondly, I was planning on going with a larger speaker amp which is why what was cut to the size it was. Instead I went with the smaller 4ch so a little bit is seen. Im still working on how im going to better hide that opening.
So basically 1 large cut and the fact that I need some glue makes my install shitty?
yep, in all honesty fit and finish make an install. You can blatently tell as soon as you look at it its not done right. You shoudl have carried the vynal all the way under the box and stapled it instead of relying on glue. But like i said its a good idea, just not executed well.
^^^^ what he said...... also those 1985 ports rock dude!
--TEAM FUCT OG--
07' moomba outback v
02' Xterra
01' IS 300
Dude u get what u pay for.... its a good start... once u finish it off it will be nice...
Its a good thing i didnt pay for it then
1986 Called They Want Their Ports Back.......Here is what was installed:
Front: Focal 165K2P Components
Rear: Focal 165CA Coaxials
Speaker Amp: Arc Audio 4050-XXK
Subs: 3 Arc Audio ARCv2 10D4
Sub Amp: Arc Audio 1500-XXK
Wiring: KnuKonceptz with a few Stinger and Monster goodies in there too
Electrical System: Optima Yellow Top
Sound Deadening: 1.5 Rolls RAAMmat BXT and 4 Yards of Ensolite Acoustical Foam
Now for the pictures:
Here is an overvall shot of the whole trunk:
Here is a more straight on shot of the subs:
Sub Amp (1500-XXK):
Speaker Amp (4050-XXK):
K2P Mid in the front door (2.8'' Fit w/ a 1.5'' Spacer :thumbup: )
TN52 Tweeter in the Stock Sail:
I didnt take any pics of the back speakers since they are black and boring and didnt show up in the pictures.
I still have to work with the vinyl since some of it is coming unglued. I also need to clean up some of the wires, but it is pretty much done.
So what does everyone think?
-Jordan
lol..... be nice.... He'll get it done right.... sooner or later...lol
you guys are fucked up. Thats a damn good do it yourself install.
Just take the vinyl off and take your time. and the ports look fine. Put some led's or neons inside the box to make them glow.
I want to see if any of the other guys who are talking shit can do a better job.
Actually from knowledge most of us CAN do better.....
He had asked for our opinions, he got them.... He also knwos what the system needs.....
This was way over and then u get on and start shit....
Oh.. and he DID NOT BUILD IT...... but thanx for your shitty input...
Yea...most of the people that made negative comments CAN build better then that looked. Like Klaud said I didnt build it, it didnt turn out nearly as good as I expected. Ill admit it now, originally I had a hard time with people talking shit about my stuff, but in reality, they were right. Designw as good, fit and finish was sub par to say the least...However a new setup (same equipment, different design) is coming within the next month or two. This one WILL look good.
john always has to rag on someones install he's in highschool john.
Damn talk about brining back an old thread...this one will NEVER die.
Anyway my car is at the shop now getting redone should be finished within the next 2 weeks. This time it will be a good install
Its cool though, i accept the comments, that install really wasnt that great anyway. Its all going in the trash
Posting Permissions
Reply With Quote
