hey i have a Alpine 3552 4/3/2 Channel Power Amplifier and im trying to figure out what to do with the Remote Part.It is a 2 Pin Block Thing. How do i Connect my Remote Lead To This? Reps Given.
Problem With My Amp. Help Please
hey i have a Alpine 3552 4/3/2 Channel Power Amplifier and im trying to figure out what to do with the Remote Part.It is a 2 Pin Block Thing. How do i Connect my Remote Lead To This? Reps Given.
:idb:
wrong section.
GCO Member
NRA Member
look on the bottom side and see if there is a REALLY small flat head screw, my us amps run the "block" for their remotes and I just use my girlfriends eyeglass repair kit screwdriver for it..... try taking a picture if not
:idb:
:idb:
amp was probably supposed to come with some connector that you wire the remote too. dont have anything that goes into that?
- 1993 Honda Civic VX
- 2008 Acura TL-S
i dont know i bought it like this. do you think theres any other kind of wiring i can do to work this amp?
:idb:
are you sure thats the remote input and not some kind special audio input? i havent been around audio stuff for a while so i dont know. not much i can think of thats not ghetto other than trying to find a connector made to go in there. if i was getting desperate ide do something ghetto, (cant tell if those are straight out prongs or metal tabs that push in on the side) like stick that wire in it till it got a good connection and then would hot glue it so it would stay.....haha but thats only last resort nothing else i can do
- 1993 Honda Civic VX
- 2008 Acura TL-S
youll need to get 2 male adapters and crimp them on the ends of your remote wires and youll be good...
Last edited by tluve69; 02-26-2008 at 05:14 PM.
moved for ya.
The Carbon Fibered R6
thx. bump.
:idb:
any chance you can get a bette pic of that connector? I cant see a thing in that crappy pic.
look at attachment on my message above, i had an ol school Alpine V12 that I had to use those connectors on
thx tluve69. reps to you.
:idb:
fig your **** out kent?
sort of. do i have to drag a 12v to the remote?
:idb:
remote doesnt get 12v, it gets a remote signal from your head unit. It will be a blue or blue/white wire on the harness.Originally Posted by G.C
if im not mistaken you can get that connector at radio shack you will have to bring in the amp to match it up i got one for my oldschool v12 there but its been about 5 years ago but they may still be able to help you out its worth a try.
Posting Permissions
Reply With Quote
