1979 Datsun B210 - Build up
Hey Guys
Wanted to update you on my new project and build:
Donor - 79 Datsun B210 ( have title)
Here are a few shots of how it sits. Its being shipped from Cali to GA.
Plans:
VG33E with Single Turbo setup
Custom Intake Manifold
Mopar Rear End cut down to fit 10 inch wide wheels for traction - will have either spool or LSD internals
Full adjustable suspension 4 link etc
Full Interior
210 Arrives
Last edited by 1sickZ; 10-15-2013 at 11:29 AM.
Yeap i took over this project and here is what is on tap so far on it!
ITB's are not what i will use as i am going to do dual side draft solex carbs, but it will look very close to it, and a custom made header i will be fabricating for it after i do the engine swap in it this should be up and running by summertime, hopefully.
SR20 Carbed Datsun B310
Sweet!
'82 TE72 SR5 Sport Coupe
3tc
This is the look i want with this, but without the body kit and no stupid looking (hella-fuck fender flair messed up look), wheels that fit good and perfect is whats the Dr. Toyota1515 order!
SR20 Carbed Datsun B310
LOL
Josh
Last edited by 1sickZ; 12-11-2013 at 07:59 PM.
Shut up FAGGOT!
SR20 Carbed Datsun B310
So are you still building the 1uz Cressida?
'82 TE72 SR5 Sport Coupe
3tc
No 1UZ anything...
I have a 1JZ Cressida
Turboed 3TC TE72
3TC Suzuki Samurai
Carbed 3TCStarlet
Didn't you just have something 1uz?
1985 SR5 1UZFE Drift/Daiily Build ATL Ga
'82 TE72 SR5 Sport Coupe
3tc
Yes now it is a Full 3TC TE72 Build IA wont let me change the title of the thread...LOL
Josh
Gotcha! What happened to the V8? Sold to fund the 3TC or put away for a rainy day?
'82 TE72 SR5 Sport Coupe
3tc
I would leave the body alone the paint/stripe patina is super cool!
Hella stock member!
Nahh, it will be painted eventually, cars with patina are not as valuable as a well painted car, yeap, it looks cool, but thats it!
SR20 Carbed Datsun B310
I have never thought of these as valuable? What are they worth now a days?Originally Posted by dragoncelica
Hella stock member!
Are you kidding me or just plain dumb?
just in case you are that DUMB, a car well painted always worth more than a car that is not well painted, let me know if i need to make you a little map so you understand Kid?
SR20 Carbed Datsun B310
No Need to cop a attitude, Perhaps you took what I said the wrong way I know a well painted car Can up the value. I was asking what something like this was worth I know the 510s are worth a good bit of money But I know nothing about these Besides a neighbor had one when I was a "kid" in the 80s.
Hella stock member!
Typically a nice Cali B210 is in the 2500 range if its complete and in good shape no rust and running. Which this one is.. It was purchased from a guy in Cali and shipped to GA. This was a great find as it was a shell and was ready for a engine and trans.
perhaps i jump the gun and like you said i took it the wrong way, dealing with smart ass little kids all the time get you in a defensive mood all the time LOL, sorry,
Yeap a good 210 with all the good mods could fetch serious money if is well done, we are talking in the neighborhood of 6 to 9 G's and more depending on craftsmanship and parts used!
SR20 Carbed Datsun B310
Do your breathing excersizes you are like a pregnant woman...LOL
Josh
lol asshole kuuuaaahahahahahahaha
SR20 Carbed Datsun B310
LOL
Josh
Last edited by 1sickZ; 12-11-2013 at 07:59 PM.
Find some wheels i like to use in this, 15x8 +20 so no fender stretching hella fucking the clean lines of the car!
SR20 Carbed Datsun B310
Nice I have these listed in my favorites as well... Will look nice.. I will also get a preview to how they look.
Josh
It is finally home fun starts soon!
SR20 Carbed Datsun B310
i couldn't hep it myself and have to steal 10 minutes from my wife to do list to put the front end together a little degreaser and water and now it does not look like a junk!
SR20 Carbed Datsun B310
LOL
Josh
Last edited by 1sickZ; 12-11-2013 at 08:00 PM.
here is what i was trying to get from Japan!
SR20 Carbed Datsun B310
Good Luck...
Josh..
I know i will need all the luck possible!
SR20 Carbed Datsun B310
To find those bumpers yes your will... I looked for the past 6 months and found one rear and that was it..
These are a set and are $261 plus shipping!
FROM JAPAN
SR20 Carbed Datsun B310
bro I'm about to ban you until you get batman on the road. He can't fight crime without his car!
YES BANNNN HIM..
Josh
Last edited by 1sickZ; 12-11-2013 at 08:00 PM.
LOL
batman is getting on my nerves now lol
SR20 Carbed Datsun B310
Mine too its too big and it takes up alot of space that we could use to work in...
Josh
400% right buddy!
SR20 Carbed Datsun B310
LOL
Josh
Ok here is somethin i do last nighet when imsomnia attacks,
Went downstaresand start mocking up the engine tranny combo,
If you are familiar with Nissan u must know SR20 block castings are different from FWD to RWD
But u can use the FWD one in RWD with some modifications but you cant do the other way around!
Here is what u need to trim from the FWD block to make it fit on the RWD tranny,,,
You need to trim all that to get the RWD starter on its place,
Then in order to atach the tranny on that side a heavy duty bracket need to be fabricated, and that bracket is bolted to the side of the block and goes back to the tranny bellhousing under the starter, this bracket must be minimum 3/8 thick steel or 1/2 inch aluminum,
It will be cool and super strong, this way any SR20 block could be used and i dont have to be obligated to use the ABUSED RWD blocks only!
Pss
By the way those mods is only on the starter side cuz the other side it a prfect fit!
SR20 Carbed Datsun B310
Just in case you guys ask or worried about the amount of material to be removed from the block,,,
Is not that much for real, the RWD casting do not have the starter ring whatsoever and the only difference is the lower ear for bellhousing attachment is in a lower position, thats it, i am just replacing the lower ear with a fabricated bracket that bolts to the engine block next to the motor mount bracket and maybe 3 or 4 oil pan bolts all together,
I do drill one hole on the tranny bell to acomodate the top right hand bolt and use a spacer betwine the tranny bell and the engine cuz the bell is hollow there,
But here is a rugh sketch of what that bracket will look like!
By the way the top bracket is not necesary but i just trow it out there just in case someone ask!
SR20 Carbed Datsun B310
Your such a dork but that is cooooolllll
Josh
Last edited by 1sickZ; 12-01-2013 at 12:38 PM.
Posting Permissions
Reply With Quote
