NAIZBST lazy build thread....

Printable View

Show 100 post(s) from this thread on one page

11-08-2012, 12:55 PM
NAIZBST

thanks alex14!
11-12-2012, 10:19 AM
NAIZBST

got more parts in... hopefully be putting heR back together soon.
11-15-2012, 10:41 PM
jojeezek

updates?
11-16-2012, 06:50 AM
NAIZBST

I will have some updates next week since i'm off all week.
11-20-2012, 12:09 PM
NAIZBST

more updates!!!
since i'm off all week of thanksgiving I figured I would get something done on the caR!!

por15'd more stuff!!

http://i20.photobucket.com/albums/b2...d/DSC_0564.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0563.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0562.jpg

finished

http://i20.photobucket.com/albums/b2...148AB545E8.jpg http://i20.photobucket.com/albums/b2...147C379880.jpg

http://i20.photobucket.com/albums/b2...1494D9A3A3.jpg

http://i20.photobucket.com/albums/b2...1471454252.jpg

Finally finished the fender wells and underside in por15 with a topcoat (which is lighter grey)

http://i20.photobucket.com/albums/b2...0F8A395BBD.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0582.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0583.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0584.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0585.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0586.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0587.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0588.jpg

I kinda like the two tone :P
11-20-2012, 12:09 PM
NAIZBST

I also wanted to mock up my new fuel and brake lines

old stuff

http://i20.photobucket.com/albums/b2...d/DSC_0578.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0579.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0577.jpg

new lines together

http://i20.photobucket.com/albums/b2...1B5130D2F1.jpg

I also sprayed the plastic tray black again

http://i20.photobucket.com/albums/b2...14A1BCD86D.jpg

http://i20.photobucket.com/albums/b2...14ACBD3FAD.jpg

Also had my future father in law and his friend stop by and bring their welder

I had to cut a hole in the toe adjuster area since the bolt was rusted to the toe arm. Got everything taken care of and also was still able to use the slide adjuster nut.

http://i20.photobucket.com/albums/b2...14C40DE272.jpg

rewelding the hole back up!!!

http://i20.photobucket.com/albums/b2...0F52E2911A.jpg

then por15'd over it

http://i20.photobucket.com/albums/b2...1AFCE8A9FB.jpg

http://i20.photobucket.com/albums/b2...1B07C1CC74.jpg

[b]And last but not least I pressed my lower ball joints in[/b

http://i20.photobucket.com/albums/b2...0F5F5B4669.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0581.jpg
11-21-2012, 03:00 PM
98blackcivic

more more more more more more more more!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
11-21-2012, 03:23 PM
.blank cd

Shit. I didn't know you took the windshield out already
11-26-2012, 06:53 AM
NAIZBST

Quote:

Originally Posted by .blank cd

Shit. I didn't know you took the windshield out already

yes sir a few weeks ago
11-26-2012, 09:52 PM
jojeezek

great work!!! (class is in session boyz listen up!!!) :)
12-01-2012, 10:05 AM
NAIZBST

got many more parts in and will actually start putting stuff back on the caR
12-05-2012, 10:19 AM
NAIZBST

Have some updates!!

Got the fuel/brake lines all mounted up

http://i20.photobucket.com/albums/b2...2AE6B7C8EE.jpg

http://i20.photobucket.com/albums/b2...2B2D6A70A3.jpg

http://i20.photobucket.com/albums/b2...2B34F3488D.jpg

http://i20.photobucket.com/albums/b2...2B23F2F15B.jpg

I got the lines bolted up and also got the subframe mocked up

http://i20.photobucket.com/albums/b2...2B73FD84FE.jpg

http://i20.photobucket.com/albums/b2...2B7ECC8EBD.jpg

I also had to fix/ rethread some holes due to paint and por15 in the threads

http://i20.photobucket.com/albums/b2...30805D2F8F.jpg

also a departing pic
broken type R spoiler and rusted lines in the trash :P

http://i20.photobucket.com/albums/b2...2B8D214A7A.jpg
12-05-2012, 10:50 AM
Sammich

that engine bay gives me great boners
12-05-2012, 11:27 AM
.blank cd

Quote:

Originally Posted by NAIZBST

I also had to fix/ rethread some holes due to paint and por15 in the threads

I told you to put screws in the holes! Lol
12-05-2012, 11:28 AM
.blank cd

Quote:

Originally Posted by Sammich

that engine bay gives me great boners

You should see it in person
12-05-2012, 11:28 AM
Sammich

Quote:

Originally Posted by .blank cd

You should see it in person

i dont have money for any rubbers
12-05-2012, 12:16 PM
NAIZBST

Quote:

Originally Posted by Sammich

that engine bay gives me great boners

you need to get out more :boobies:

Quote:

Originally Posted by .blank cd

I told you to put screws in the holes! Lol

it's all good!

Quote:

Originally Posted by .blank cd

You should see it in person

you don't even see it in person :taun:

Quote:

Originally Posted by Sammich

i dont have money for any rubbers

:cry:
12-12-2012, 05:22 PM
NAIZBST

Got all of the brake/ABS lines in

http://i20.photobucket.com/albums/b2...d/DSC_0592.jpg

I also put in the driver side wiring harness

http://i20.photobucket.com/albums/b2...d/DSC_0593.jpg

edit...

the caR finally broke skin!

http://i20.photobucket.com/albums/b2...84F77D00D9.jpg
12-12-2012, 05:54 PM
.blank cd

I'm coming by to see this tomorrow.
12-26-2012, 03:49 PM
NAIZBST

Started to get gas tank and filler neck ready to put back in the caR

cleaned up and painted

http://i20.photobucket.com/albums/b2...d/DSC_0598.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0599.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0597.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0609.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0611.jpg

pic of the brake and fuel lines

http://i20.photobucket.com/albums/b2...d/DSC_0606.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0605.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0604.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0606.jpg

Gas tank (added foam padding to the top since the old stuff is trash)

http://i20.photobucket.com/albums/b2...d/DSC_0608.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0610.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0616.jpg

bought new covers since the old ones were trash

http://i20.photobucket.com/albums/b2...d/DSC_0614.jpg

Last but not least i got the exhaust back up and bought some heat shields as well since they were missing.

http://i20.photobucket.com/albums/b2...d/DSC_0624.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0618.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0622.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0621.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0619.jpg

waiting on my PCI RTA's and also a new lower control arm back ordered from the dealer :(
12-26-2012, 08:17 PM
Bacon

I wish I had the patience to do this with my DA.

Sent from my Galaxy S3 using Tapatalk.
12-28-2012, 06:51 PM
NAIZBST

thanks Bacon!

got the rest of my suspension pieces and hopefully by next week get everything put back on
01-12-2013, 09:11 PM
NAIZBST

more updates!!!

I got all of my rear suspension parts in so I can put it back together

PCI RTA's

http://i20.photobucket.com/albums/b2...E84B71E5F8.jpg

Put everything back up

http://i20.photobucket.com/albums/b2...E63D64FFE2.jpg

It was bothering me with the springs and surface rust so I took them apart to get sand blasted

http://i20.photobucket.com/albums/b2...E66D52AFF9.jpg

http://i20.photobucket.com/albums/b2...E6805F2019.jpg

Got everything ready to go get sand blasted and powder coated (i'm lazy and didn't want to Por15)

http://i20.photobucket.com/albums/b2...E6775DF0BE.jpg

A few days later I picked up everything from the sand blaster and brought to the powdercoater! Here is the finished product!

http://i20.photobucket.com/albums/b2...E6B31944DB.jpg
01-12-2013, 09:11 PM
NAIZBST

a departing pic for the evening...
http://i20.photobucket.com/albums/b2...d/DSC_0669.jpg
01-12-2013, 09:14 PM
MeFryRice

Very nicely done sir!
01-14-2013, 09:51 PM
NAIZBST

Quote:

Originally Posted by MeFryRice

Very nicely done sir!

thanks man!
01-14-2013, 09:51 PM
NAIZBST

Got the coilovers back together and torqued the subframe and other suspension parts. Put the front sway bar in and got the rear sway bar bushings in and put them in.

http://i20.photobucket.com/albums/b2...d/DSC_0679.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0677.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0678.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0680.jpg

I also am getting the interior ready to be sanded and painted

http://i20.photobucket.com/albums/b2...d/DSC_0672.jpg

http://i20.photobucket.com/albums/b2...d/DSC_0676.jpg

and how she is sitting right now...

http://i20.photobucket.com/albums/b2...d/DSC_0671.jpg
01-14-2013, 10:43 PM
.blank cd

Sex
01-14-2013, 11:01 PM
.blank cd

Sex
01-14-2013, 11:27 PM
RsonGt3's

Wow. I wish i had the skills you have to do that to my car. You dont happen to have an extra itr wing laying around do you?
01-15-2013, 12:47 AM
Da_unknown

looking good buddy
01-16-2013, 08:48 PM
NAIZBST

Quote:

Originally Posted by RsonGt3's

Wow. I wish i had the skills you have to do that to my car. You dont happen to have an extra itr wing laying around do you?

thanks man! I don't have an extra ITR wing unfortunately since I had to buy mine.

Quote:

Originally Posted by Da_unknown

looking good buddy

thanks man!!!!
01-19-2013, 11:51 AM
EJ_Allmota

such an amazing restoration/upgrade homie.. keep it up..
01-19-2013, 06:47 PM
Humphrizzle

i love this
01-27-2013, 08:42 AM
NAIZBST

Quote:

Originally Posted by Humphrizzle

i love this

Thanks man!!
01-27-2013, 08:45 AM
NAIZBST

Over the past week I got more done on the caR!

Got the interior sanded and also ground down the old cage stumps

http://i20.photobucket.com/albums/b2...1BE0EE8DAB.jpg

http://i20.photobucket.com/albums/b2...1BE99037A1.jpg

http://i20.photobucket.com/albums/b2...1BF392E105.jpg

http://i20.photobucket.com/albums/b2...1BFADC3C7B.jpg

http://i20.photobucket.com/albums/b2...1C03B1D071.jpg

http://i20.photobucket.com/albums/b2...1C08958954.jpg

http://i20.photobucket.com/albums/b2...1C0DFE99B5.jpg

and I also got some tires in for my track wheels

http://i20.photobucket.com/albums/b2...1C186D616E.jpg
01-28-2013, 07:14 PM
AV8ter

Nice meats. 225/45 or 205/50? I just ordered up some 205/50 Ecsta XS but was on the fence between the XS and the R1R. Went with the XS so I could rotate the tires side to side.
01-28-2013, 08:35 PM
NAIZBST

Quote:

Originally Posted by AV8ter

Nice meats. 225/45 or 205/50? I just ordered up some 205/50 Ecsta XS but was on the fence between the XS and the R1R. Went with the XS so I could rotate the tires side to side.

I went with 205/50 since they would fit no problem
01-29-2013, 12:54 AM
.blank cd

Picked out some wheels?
01-30-2013, 09:23 PM
NAIZBST

Quote:

Originally Posted by .blank cd

Picked out some wheels?

I've had the track wheels for a while

Show 100 post(s) from this thread on one page