Here is the turbo to be used in this build, a Precision 6262 billet unit, this is awesome!
One less thing to worry about.
Here is the turbo to be used in this build, a Precision 6262 billet unit, this is awesome!
One less thing to worry about.
SR20 Carbed Datsun B310
Another engine change in this machine, from 4TGTE to a 3TC-Turbo :mrgreen:
Due to a unsuspected customer, that really really want the 4T, i was obligated to let someone else deal with the 4T and i decide to install a totally built 3TC instead, still going to have the power but not the wow factor, hell, i can live with that!
SR20 Carbed Datsun B310
With all the parts i was going to buid the 4T i am building a stout 3TC with only the adition of stainless Valves bronze valve guides and new dual valve springs, this will have the same HP i was going to get out of the AWESOME 4TGTE.
Head with Stainless valves 1mm oversize intake and exhaust.
JE 87mm Turbo Forged Pistons
SR20 Carbed Datsun B310
By the way the engine to use still going to be the 3T but the 4T will stay here and not going anywhere!
SR20 Carbed Datsun B310
When are we gonna see an assembled engine in the car???
soon, very soon!
SR20 Carbed Datsun B310
Cut the big intercooler to size so it will fit right, as i dont want to get rid of the A/C system!
SR20 Carbed Datsun B310
Cross member cleaned up for new motor mounts brackets!
SR20 Carbed Datsun B310
Oh yeah buddy check this out.
Engine swap started RA64 to TA64, i cut the RA brackets from the X-member and clean em up and install the RA motor mounts to the 3T engine Brackets, and then bolt the cuted X-member brackets to the motor mounts, install the W58 trany/3t bellhousing combo on the factory trany mount,this is the easiest Swap i have ever done, just need to weld the 1/8' 4"x5" plate to the X-member and then the brackets to the plate, CHECK IT OUT !
Cleaned X-member
Engine mocked up,
Trany centered.
Driver side mount,
Passenger side mount
Engine sitting in its mounts not welded yet.
SR20 Carbed Datsun B310
Engine swap finished welded up and painted!
SR20 Carbed Datsun B310
Still not desided yet, the day i get ready for the machine shop i will tell,
SR20 Carbed Datsun B310
Here is the intake i scored for my 3TC tomorrow clean it up sand it down and black wrinkle finish paint will be applied if it doesn't rain!
SR20 Carbed Datsun B310
XXXXXXXXXXXXXXXXXX
Last edited by dragoncelica; 05-23-2012 at 08:32 PM.
SR20 Carbed Datsun B310
I change my mind i will keep it finish it and have fun with it!
SR20 Carbed Datsun B310
Just mocking up some stuff to make sure everything will fit when is time to install all for the last time!
SR20 Carbed Datsun B310
Looks at home in there.
Ohh yeah, i call this (OLD DOG NEW TRICKS)
SR20 Carbed Datsun B310
Turbo manifold fabrication underway not finished yet but it is looking awesome biggrin :mrgreen:
SR20 Carbed Datsun B310
oh sheittt, sheitttt!!!!
Another wheel change... This will be the 3rd set of brand new wheels in 8 months and the car hasnt hit the streets yet, :-P
SR20 Carbed Datsun B310
good stuff, as always
ATL DAsquad Member #9
Something something!
SR20 Carbed Datsun B310
Good Choice i like those wheels betta... nice build My build thread was just posted 1UZFE SR5 Rolla.
Josh
Thanks buddy,
I will check it up ASAP i love that kind of stuff!
SR20 Carbed Datsun B310
I did fanricate my coilovers today and they came out so fricking AWESOME i will post pictures tomorrow.
SR20 Carbed Datsun B310
SR20 Carbed Datsun B310
SR20 Carbed Datsun B310
SR20 Carbed Datsun B310
Motor in the car, YES!
SR20 Carbed Datsun B310
YES!!!
'92 C2500 6.5 Turbo Diesel | '96 240sx
Sick build this thing looks none threatening when you first see it then your like OHHH SHIIIIIIZZZZLLLLEE....
Josh
hahahaha!
thats funny!
updates soon!
SR20 Carbed Datsun B310
Ohh man the 3TC is creeping.. watch out it bites
i think we need a start up vid..
Josh
Is this sold yet.... I think Yes and it needs to get outta the yard ASAP...LOL
Josh
Did the Intercooler piping today, it came up really fluid and good i like it a lot!
SR20 Carbed Datsun B310