Results 1 to 6 of 6

Thread: 1991 318is M50/G260 Swap $4700

  1. #1
    IA Member Dj Syco's Avatar
    Join Date
    Jan 2012
    Location
    Lville
    Posts
    80
    Rep Power
    13

    Default 1991 318is M50/G260 Swap $4700

    SOLDSOLDSOLD


    Up for sale is my 1991 318is Sterling Silver with a 1994 M50/G260 Swap
    I really really don’t want to do this, but I NEED cash. This car has been my baby for over a year and a half and I’ve tried everything in my power to keep it. If there’s anything you’d like to know about the car just ask. I've got quite a bit of documentation as well. I’ll have pictures up tomorrow, but I want to go ahead and post now so I can get it out there. Price is 4,700 OBO for all my IA peeps. Just hit me up with a PM whenever.




    Body has around 210k and engine has around 150k.
    -318/M3wiring covers
    -A/C custom lines
    -A/C condenser working
    -Ground Control Coilovers with Koni adjustables.
    -MK3 front lip.
    -US Ellips with 6kHID’s and ballasts
    -Blue door panels and rear seat(cloth) tan cloth front sport seats.
    -CB Radio Antenna
    -Sony Radio with Orange screen
    -TRM chip
    -Awesome amazing rare ACS wheel(needs fixing though )
    -Upgraded unknown speakers but they work great!
    -Comes with amber tails AND All red tails! I’m refinishing the red tails as I type this.
    -4.10 MEDIUM CASE!!!!!!!!! LSD!!!!! So awesome
    -75MM bullet nose studs
    -Vert front strut bar
    -braided brake lines



    Recently replaced Items:
    -Thermostat housing
    -Mishimoto Radiator
    -A/C Dryer
    -A/C Belt
    -Practically brand new tires mounted on Rota J-SPL’s(they’re dark purple but you could blast them with whatever and they’d be fine)
    -Rear Strut Mounts with Reinforced plates



    The bad:
    -4 dents, will be documented in pictures
    -Paint isn’t the best
    -Right side front and rear trim falling off
    -Needs right rear wheel bearing
    -Exhaust is pretty slapped together (not my choice, stupid lame exhaust company)
    -The A/C Dryer Plug on top doesn’t get the signal it needs to run Freon into it. So while the A/C is hooked up and everything works. Its not charged. All you need are alligator clips to make it run while you charge it and bam, A/C.
    -Will need rear brake pads soonish(by next spring)


    Yes I will take off all the stickers. Yes I have a Bad Religion sticker on my hood. Its a band. I don't have a front roundel but if it matters that much I'll take 12 dollars off the car price and you can go buy one.


    Trim is broked-ed


    Dent

    Same Dent





    Another dent at the front drivers side. meant to get close up's but i borrowed the camera and no longer have it.


    Purple wheels and studs. I have the lug key too(purchased on here btw from cali boy)


    nother dent


    nother dent further back





    Shitty Exhaust cut


    Borla


    Trunk


    no tool box kit, but I have it. just didn't have any tools for it


    fitament. I have 5 mil spacers all around but trying to get 12mm ones. I'll give you the guys info on where you can get 4 12mm spacers hubcentric for 140 bucks


    Inside pics


    ECU mounted properly


    Shiftboot I made with UUC shift knob


    Tan cloth sport seats

    1 stain


    back seat floor, just needs to be steam cleaned.


    Back seat, top blue houndstooth bottom standard cloth. I can get the bottom houndstooth but its stained pretty bad and I can get the top standard blue, but its torn on the top


    small blemish


    Awesome speakers. I have the grille covers if you want them




    Awesome wheel. The centerpiece says ACS. I can get more pics if you want. I love this wheel and is my pride and joy. Top has 2 holes.



    Leather e-brake


    Radio is a lot closer than this picture shows.


    Awesome 318is check panel


    Headliner is a little off here. doesn't sag and isn't real noticeable


    Sunroof works!(crank)



    ENGINE!




    XI booster


    BAM custom pinned C101, thats right. no stupid adapters!




    Custom A/C lines. baller.


    Part that don't wanna work! I have no idea why but I'm guessing the plug is corroded on the harness side


    M3 Covers looking nice


    Jetta Lip


    Well thats everything. need to know anything else PM me!
    Last edited by Dj Syco; 12-23-2012 at 01:04 AM.


  2. #2
    Senior Member | IA Veteran Catnip's Avatar
    Join Date
    Oct 2007
    Age
    33
    Posts
    19,743
    Rep Power
    47

    Default

    Awesome for sale ad. Sounds top notch! Hope you get what you're looking for, as it seems very reasonable.
    '92 C2500 6.5 Turbo Diesel | '96 240sx

  3. #3
    IA Member Dj Syco's Avatar
    Join Date
    Jan 2012
    Location
    Lville
    Posts
    80
    Rep Power
    13

    Default

    Thanks!!


  4. #4
    IA Member southdakota's Avatar
    Join Date
    Dec 2011
    Location
    Austell
    Posts
    121
    Rep Power
    13

    Default

    one of my favorite cars ever wish i had cash man

  5. #5
    IA Member
    Join Date
    Jan 2012
    Posts
    22
    Rep Power
    0

    Default

    Txt me 404-510-5357

  6. #6
    Senior Member E36slide's Avatar
    Join Date
    Jan 2012
    Location
    Athens
    Posts
    2,579
    Rep Power
    0

    Default

    Damn if you could add cash id trade you a 95 m3

    Sent from my DROID BIONIC using Tapatalk 2
    <3 Catnipples

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!