any ideas for making a well rounded all motor gsr?
no boost all motor
any ideas for making a well rounded all motor gsr?
damn man look around thats tons and tons of info on this sit for a nice built gsr u just got to look or ask vteckidd
yes
^^ BWA BWA BWA HA HA HA!!!! Great answer!!! LOL ^^
"I'm not a gynecologist... but I'll take a look."
I got tons of fucking ideas, I'm so full of ideas I don't know what to do with all of em. They're spilling out of my ears.
wow u guys answer ?'s GREAT thanks for the help i'll figure it out thanks for nothing
DO SOME FUCKING RESEARCH ON YOUR OWN. COME BACK AND ASK A SPECIFIC QUESTIOIN ABOUT A SPECIFIC SETUP THAT YOU ARE INTERESTED IN. DON'T EXPECT ME TO WASTE MY TIME HOLDING YOUR DAMN HAND TELLING YOU EVERYTHING YOU NEED TO DO! I HAVE NO PROBLEM HELPING OUT OR ANSWERING QUESTIONS BUT STUPID FUCKING QUESTIONS LIKE THE ONE YOU ASKED ARE THE REASON NOOBS GET FLAMED. eNJOY YOUR TIME ON IA.
Seriously man. You never said if you wanna spray it, boost it, use all OEM parts, aftermarket, horsepower goals, what chassis the engine gonna be in, if you wanna drag race, autox, road course... HOW WILL WE KNOW? That's like walking into a pharmacy and asking "Does any1 know any good medicines?" and then getting mad b/c they look at you like you're crazy. SPECIFY homey.
"I'm not a gynecologist... but I'll take a look."
define a "well rounded GSR"Originally Posted by nightphoenix
what are your WHP goals?
what is your BUDGET?
what car is the motor going into?
What will the car be used for (drag, AutoX, SCCA?)
you need be more IN DEPTH with your questions
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
alright DUMB FUCKS.....LISTEN UP I ASKED THIS ?..."any ideas for making a well rounded all motor gsr?"
READ IT AGAIN ALL MOTOR..i wish i never join this site just dumb asses doing nothing thinking they have speed/horsepower on these boring same old cars...and to the user name 99si learn to read i said all motor one more time all motor... but it's ok why ask u...u just have a 99 si wow b16 big fucking deal..let me guess u going to boost just like EVERYONE else...and BABY J LEARN TO READ ALSO...ALL MOTOR ONCE AGAIN ALL MOTOR....IT'S OK I'LL HANDLE IT MYSELF
YOU'RE the dumbfuck ass-clown!!! A OEM GSR w/ NO mods is "well-rounded" w/out even modding it! It ALL depends on how extreme you wanna go with it and what you want the motor to do for you. We're driving/building the same old cars? Muthafucka I have the highest WHP unsponsored ALL-MOTOR Spec V in the fucking NATION and have held that title since late 2003! And if you think you'll outclass my new B series block then you better have deep pockets tard. Mike had one of the highest WHP B series blocks in GA!! KNOW YOUR FUCKIN' AUDIENCE before you start talking about people building the same old "boring" cars. So you are building a ALL-MOTOR GSR right? PLEASE show me something that hasn't ALREADY been done before!! HIGHLY FUCKIN' UNLIKELY. You think THESE responses were HARSH? Post that crap on on any Honda specific forum worth it's bandwith and you might see the ban stick before you even refresh the damn thread fuck-tard! If you can't handle a few guys saying SPECIFY then you gotta long way to go.
Ya killing me NOOB. ALL-MOTOR? ALL motor can leaving it stock, or can be near 300 wheel AND ANYWHERE IN BETWEEN IDIOT!!!! Pump gas? Alcohol? ITBs? Hybrid setup? I can go on. There are COUNTLESS combinations. Either SPECIFY and we can help you or tell you who to talk to, or shut the fuck up! And yeah... when you get your magic motor built I will set up a run w/ you and 99SI w/ his puny N/A "B16"!!! LOL. Good luck in that race stupid!!!
Last edited by BABY J; 07-11-2006 at 02:17 PM.
"I'm not a gynecologist... but I'll take a look."
owned
"I remember the first time I had sex – I kept the receipt."
owned
"I remember the first time I had sex – I kept the receipt."
That shit is funny. I said, "all motor". My B16 was built ALL MOTOR in 04. 175 whp @9300 rpm, daily driver over 120 miles per day. I had an oil pump failure. I spun a bearing. I am building a GSR block to go with my head and a few new tweaks, should see between 185-195 whp. Maybe you should use the "search" function. The specifics of my old build and my new build are just a few threads down from here. It's titled, "the destruction and reincarnation of 99si's motor". Good luck, maybe you should get on Honda Tech, go to the all motor forum, type the "EXACT" SAME QUESTION YOU DID HERE. See what happens. lol. Maybe you should learn how to comprehend what you read, a "well rounded all motor GSR" means many things to many people. You aren't looking for specific info you're looking for someone to tell you how to do something and it is not going to happen.
ITR cams, RMF header, Crome to tune it.
there, thats well rounded
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
yeah aight...enuff wasting my time with u jokers....
lol at u
GE sleeve job, 84.5 mm bore, CP 12.5:1 pistons, Pauter billet rods, ACL race bearings, Arp rod bolts, head port by DFE with +1mm valve job, Jenvey ITB's, Kaaz lsd, Hondata S300, eleventy billion hours on the dyno.
^^ Which spark plugs? Champion? Autolite?
"I'm not a gynecologist... but I'll take a look."
DENSO! Iridium power ftmfw! With some Nology hot wires that cost 100+ a set! lol. Don't forget the Unorthodox Racing underdrive pulleys
LOL. Hey PHOENIX. Figure out your projected HP goals. Then make sure your pockets can back you up on those goals. If not, do things in stages if need be. Every project that I have rushed, I have missed the boat on major shit most times. The key (for me) is to WRITE IT ALL OUT (spec sheet). Then scrub it and RE-write it. Send that to some1 you trust and bounce ideas off of each other. Decide what you want the motor to do for you... daily driver, weekends only, race only, etc. Determine what chassis it is going in, and THEN post it up man and you can get some direction from a lotta smart people on this forum. If you throw out something vague then you will get something vague back. Welcome to IA Bro... it gets better.
"I'm not a gynecologist... but I'll take a look."
WTF is there 12 guests reading this thread? It must be Honda Tech members that have followed the link to the Omnipower ITB thread and decided to look in here. lol.
hahahaha....funnny shit...so much caps...my head hurts...
That reminds me: do ITB make that much of a difference?
"DON'T FLOOD THE CAR PICS SECTION WITH YOUR BULLSHIT
FORMULA D PICS" SQUAD MEMBER
NOW JUST HOLD UP A FUCKING MINUTE, SHITHEAD. Who in the FUCK do you think you are talking to like you are the fucking man? Bitch most of us have forgotten more than you know about import performance, so don't come on here asking the most vague question on earth and then get pissed because we don't come up with the answer your bitch ass wants. You wouldn't survive a day on Honda-Tech you douche bag.
As a matter of fact, I bought my CRX BEFORE YOU COULD EVEN FUCKING DRIVE SO WATCH YOUR FUCKING MOUTH ON HERE MOTHER FUCKER.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
Hey guys How can I built a well rounded d15 all motor with Vtec?
And will it consume alot of Vtec Fluid?
Oh, and BTW, incase you come back you fuckstick, VtecKidd has made the highest HP all-motor in this fucking state, and NAIZBST is about to trump that number, so maybe if you would ASK A FUCKING QUESTION THAT MAKES SENSE AND DOESN'T INCORPORATE BOTH ENDS OF THE FUCKING SPECTRUM people would answer it better.
Stupid ass.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
You have to use rounded synthetic vtec fluid. Squared synthetic vtec fluid is for boosted applications.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
D15 Block
B20 head (block off all oil passages, remove VTEC solenoid)
F20C tranny
GSR Pistons
ITR Valve Guides
F20B Valve Cover
APex'i VTEC Controller. Set VTEC ON: 50 RPM OFF: 100 RPM
"I'm not a gynecologist... but I'll take a look."
Hey, he doesnt have numbers YET!
(clings to all motor title)
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Savor the flavor baby...redballs gotcha!
He would have the motherfucker back already if it wasn't for his army drill this past weekend.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
LOL @ Mike. You should be glad to see the title go Mike. I mean it's a B motor so it was bound to happen eventually ya know? It was a good ride. The only reason I have held so long for the QR25 is b/c the motor is FINICKY as hell and no1 wants to go custom on that motor b/c the piston speed is riduclous from factory as it is! In fact, if I could do it all over again I WOULDN'T. Over 9k in the motor, not to mention 15k for the car. My Spec V is one EXPENSE ass hunk of metal to just be sitting at 240 wheel and not driven anymore. Too much in it to sell, too disappointing 2 drive daily.Imagine tossing 9k into a B build... 240 wheel would be a JOKE!
"I'm not a gynecologist... but I'll take a look."
nah i dont care, i wish matt the best, and told him he gets free dyno pull on our dyno to verify the title tranfer
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
At least you are going to lose it to a friend and not some asshat who built there shit with mommy and daddy's money. He worked hard for his shit, as did you.nah i dont care, i wish matt the best, and told him he gets free dyno pull on our dyno to verify the title tranfer
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
LOL. Good sport.nah i dont care, i wish matt the best, and told him he gets free dyno pull on our dyno to verify the title tranfer
"I'm not a gynecologist... but I'll take a look."
Pretty much.LOL. Good sport.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
DAMMIT! I give up. LOL.
"I'm not a gynecologist... but I'll take a look."
BTLFED 4 the kill
the rest left HIM nice and tender for u
-Ernie
It actually starts with a "D," but that's not the block code.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
I think your sig states how I roll the best.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
Posting Permissions
