GSR w/Skunk2 Digital CNC ported head

[Vteckidd]

Here is a recent motor we built. Hes one of our shop cars.
Specs:
GSR Block 82mm
ITR pistons
stock Rods and Crank
Skunk2 Pro Series Digital CNC Ported P72 Head
Skunk2 Pro1 Camshafts
Rocket Motorsports Valvetrain
Skunk2 Manifold unported
Skunk2 Pro Series 68mm Throttle Body
RMF 4-1 Narrow Header

TUNED BY JOHNZM, kinda lol

NOte the S2 and HRD insignias


Intake Side


We did a LITTLE tuning on the car the other night. mainly i made sure it was safe. actually the only tuning we did was do a pull and raise the FPR lol. but we made sure it was all safe, i wanted him to run some miles off on it before we shoot for big numbers, which will be this week.

preliminary results:


this was through a full exhaust with resonator. I think he can hit 200whp easily, 210whp when we switch to pro2s. but i was impressed , we 0nly did 5 pulls, and on the 5th it made 190+.

ill keep everyone updated, but im liking the TQ graphs of these new pro series cams. :thumbup:

[BTEC]

i say with good a/f tuning with the way the car was ran above, itll peak out around 197. Go ahead and run it NOW and let me know what ir does buddy. preciate it

[IntegraXTR]

damn impressive numbers

[BTEC]

damn impressive numbers

you damn right they are. shiiiiiiiiiiiit

[KevinT707]

I want those numbers Mike , but I won't ask for a refund for my motor build if I hit 185 though.

[rome97neon]

How much money u put into yall motors just to get those numbers?? I put less than 800 dollars into my joint and still doin 200 whp!!!And its a Sohc now what??

And im not even to the max I can do more head work and bottomend work and do way more than that!!! Which I have in the making!!!

[punkr6]

How much money u put into yall motors just to get those numbers?? I put less than 800 dollars into my joint and still doin 200 whp!!!And its a Sohc now what??

And im not even to the max I can do more head work and bottomend work and do way more than that!!! Which I have in the making!!!

200hp sohc? is this turbo?

[Vteckidd]

what kind of car do you have?

remember these are 1.8l 4 cyl motors

[93H22ACX]

nice

[punkr6]

what is the price on these skunk2 heads?

[Vteckidd]

ALOT but they are worth it.

$1350 + a core. they come bare, no rockers, no springs, no retainers, no valves, no LMAs. so ideally you buy a stock head, and rob everything out of it and send them the bare one in as your core.

if you sent your head to RLZ, or DFE, or anyone else thats reputable at porting heads, then you would pay more so its not that bad of a deal