my current build for my del sol

[kain86]

this is my current set-up, before with out the headers, cam gears, fuel system, and a few out small things it made 156whp and 136ftq.
im hoping for about 175-185whp this time around what do you guys think?
if theres anything else i can do to make more power other than going forge at the moment and PnP. let me know. thanx im advance.

block;
b18a1 block
stock ls rods w/ arp rod bolts
pr3 pistons (11.5:1 comp)
arp head studs
LS MLS HG
p72 oil pump
p72 water pump

head;
gsr head
crower 402a2 cams
JUN cam gears
Ferrea valves
Supertech springs and retainers
AEBS intake manifold
stock gsr TB
hondata intake mani gasket
Venom high flow fuel rail
RC 310 injectors
walbro 255lph fuel pump
VtecKiddracing RMF Narrow replica headers

stock b16 flywheel
Stage 4 comp clutch w/ heavy duty pressure plate
GSR tranny

[Black4DrEK]

Sounds like a nice setup!!

reps

[BABY J]

402s are gonna be the weakpoint in this build - but GL kid!!!

[bRiAnMcIvIcS]

Get some skunk2 pro1 cams and maybe the professional products 65mm throttle body(perfect match with your aebs intake manifold and only like $150 shipped on ebay). You really dont need a stage 4 clutch for your set-up a stage 2 would be fine.

[kain86]

well i might pull the clutch when im done building my civic for boost. and probably going with a stage 2. and if i could sell or trade the 402's I'd get some pro 1's. and im think of getting the stepped Tb that got an outside diameter of 74mm then steps into 65 or 68mm.

[bRiAnMcIvIcS]

well i might pull the clutch when im done building my civic for boost. and probably going with a stage 2. and if i could sell or trade the 402's I'd get some pro 1's. and im think of getting the stepped Tb that got an outside diameter of 74mm then steps into 65 or 68mm.

you really dont need a really big t/b, 65mm should suffice.

[kain86]

YEAH ILL PROBABLY GO WITH A 65MM SINCE NO PORT MATCHING TO THE TB WILL BE REQUIRED. SO IS THERE ANYTHING ELSE I CAN DO TO MAYBE PUMP OUT A FEW MORE PONIES?

[BABY J]

It's always cheaper to reduce weight than add HP. Put that bitch on a diet.

[kain86]

um its gutted no heater, no ac, no ps. just seats, dash, doors, and steering wheel.lol just wiring seats and a motor lol

[DC2NR]

402s are gonna be the weakpoint in this build - but GL kid!!!

I agree

[kain86]

WELL JUST GOT DONE PULLING THE SOL APART FOUND OUT THE I CAN PULL MORE WEIGHT OUT OF IT BY REMOVING THE ROAD SOUND DAMPENER FROM UNDER THE CARPET = D NOW FOR MORE POWER! SO FAR MY NEW INCLUDES A 65MM TB, AND SK2 PRO1'S. ANYTHING ELSE YOU GUYS CAN THINK OF LMK. I HAVE TIME SO IM TRYONG TO GATHER SOME GOOD PARTS. THANX

[BABY J]

Make SURE you take a break and add the REAL mods ---> SECURITY!!!!! GL kiddo.

[punkr6]

Make SURE you take a break and add the REAL mods ---> SECURITY!!!!! GL kiddo.

x2, also never drive your car to the mall or movie theatre...