Who local can redrill wheels???

[pebojelly]

I am searching for a local machine shop with experience in drilling wheels.

I have a set of BBS RS mesh I want them to be 4x100 as they are 4x114.3 now.


If anyone has dealt with someone post there info and turn around time.


Thanks in advance.

[pebojelly]

Does anyone have a 4x114.3 adapter from a 4x100?

I could bolt it to the wheel and use it as a guide.

I only need to borrow one and would pay a few dollars for your time.

[K24cb7coupe]

there should be holes for 4x114.3 already drilled. you should only have widen them...

[phoenixx1]

there is a bbs location up here by me, its actually right down the street from road atlanta, they might do it for you since they manufactured the wheels

[Saung]

Wheel Wizard in Chamblee. Look for them in the Yellowpage. Good luck.

[speedminded]

I am searching for a local machine shop with experience in drilling wheels.

I have a set of BBS RS mesh I want them to be 4x100 as they are 4x114.3 now.


If anyone has dealt with someone post there info and turn around time.


Thanks in advance.

http://www.bigchrome.com/ Stone Mountain

Does anyone have a 4x114.3 adapter from a 4x100?

I could bolt it to the wheel and use it as a guide.

I only need to borrow one and would pay a few dollars for your time.

It'll probably stick out too much with a conversion adapter.

there should be holes for 4x114.3 already drilled. you should only have widen them...

wha?

there is a bbs location up here by me, its actually right down the street from road atlanta, they might do it for you since they manufactured the wheels

lol, no.

Wheel Wizard in Chamblee. Look for them in the Yellowpage. Good luck.

Re-drilling is not listed on their site as a service. www.wheelwizard.com

[NoWAyItZTOMmY]

bump for other suggestions

[RiceBoy]

You 2 should get together.

Wheel Drilling

[mikesEK]

Re-drilling is not listed on their site as a service. www.wheelwizard.com

but they do it....or call my guy Kevin 678-570-7646