Velocity Stacks

[bigdare23]

Have anyone used velocity stacks on their intake before? Did you notice any gains or was it just "hype"? Also, would you benefit if you install it on a CAI?

[slostang]

you mean a throttle body spacer?

[all-mota]

Have anyone used velocity stacks on their intake before? Did you notice any gains or was it just "hype"? Also, would you benefit if you install it on a CAI?

you can usually expect gain of around 3 to 4 whp on a dyno with the stacks. dont bother with putting it on a cold air just get a long piece of pipe and tune it to the right lengh for peak power on your setup. different engines like different lengh intakes

[DarKStaR]

you mean a throttle body spacer?

He is talking about the piece that goes on the end of the intake where the filter goes. Looks like a curled out horn.

[bigdare23]

you can usually expect gain of around 3 to 4 whp on a dyno with the stacks. dont bother with putting it on a cold air just get a long piece of pipe and tune it to the right lengh for peak power on your setup. different engines like different lengh intakes

Thanks

[TheChosenOne]

X2 on this question. I have been seeing more people run it, and I am also curious if it is, indeed, worth the hype.

I noticed that there isn't a filter on the velocity stack. Is this safe on a daily driver?

[bigdare23]

X2 on this question. I have been seeing more people run it, and I am also curious if it is, indeed, worth the hype.

I noticed that there isn't a filter on the velocity stack. Is this safe on a daily driver?

you can put a filter on it.

[southside]

X2 on this question. I have been seeing more people run it, and I am also curious if it is, indeed, worth the hype.

I noticed that there isn't a filter on the velocity stack. Is this safe on a daily driver?

I drove my friend single cam after putting the velocity stack on, you can notice a difference.and you can use mesh on the inside as a filter or you could use a stocking .Its all the same my friend had it on his h22 and another friend has it on his poor man R.

[southside]

You can hear the intake really loud when the stack is installed.It sucks more than a fat high school chick on prom night.

[bRiAnMcIvIcS]

You can hear the intake really loud when the stack is installed.It sucks more than a fat high school chick on prom night.

LMFAO!!!

[bigdare23]

Well I installed the v.stack this weekend on my cai. In a few weeks, I'm going to dyno it to see if I notice any gains. If not, the cai is going to get converted into a short ram.

[southside]

Where did you get your stack and filter from and how much was it?

[bigdare23]

http://www.bpinitiatives.com/assemblies.php

[southside]

oh you got it from bpi.

[Pikachu]

holy **** u really paid 100 bucks for that, damn ebay's the same stuff and less than 50 bucks

[bigdare23]

holy **** u really paid 100 bucks for that, damn ebay's the same stuff and less than 50 bucks

sorry but I dont support knockoffs

[ATK_Designs]

nor can you find a 3.5" V-Stack on ebay?

The theory behind v-stack is to have closer 100% air volume travel through the pipe vs square cut intakes that only allow about 2/3 of the air volume to pass through.

[JITB]

lol whats a knockoff of a velocity stack... there all knockoffs.. blox sells them for 50-60$..

[southside]

lol whats a knockoff of a velocity stack... there all knockoffs.. blox sells them for 50-60$..

I seen some where on Honda Tech said BPI was suppose to be the originators.Of the velocity stack for honda and stuff but If its the same I'd rather pay less than more.

[JITB]

I seen some where on Honda Tech said BPI was suppose to be the originators.Of the velocity stack for honda and stuff but If its the same I'd rather pay less than more.

Some stuff is just really honestly dont matter knockoff or not, its a donut shaped piece of plastic.. cut in half.. People have been using those for years, homemade or aftermarket..

[mocha latte cupcake]

sorry but I dont support knockoffs

QFT! ^^^^

i know for a fact that they do better on nissans. its proven that a JWT pop charger (they come with velocity stacks) ALWAYS dyno 4 hp over other intakes without them. filter for filter its the same, its the velocity stack, i would buy one for sure! money well spent in my eye!

[bigdare23]

It's more of a principal thing for me. Blox makes a living by duplicating everything popular and functional without the headache of R&D. They see a popular produce and duplicate it. The only reason why their produces are cheaper is because the take shortcuts and use cheaper materials and I wont support their tactics. Plus, I'm not building my car on a "tight" budget nor is in a rush in finishing it, so I not to worry about prices.

Also, majority of the price came from the filter and not the velocity stack. The velocity stack itself is about $35. You're paying for a good quality air filter (K&N) unlike the cheap no name brand filter you get with the blox product.

I know they aren't the "creators" of the velocity stack since it was use in many other applications (besides just automobiles), but they did make it popular in the Honda scene and blox caught on to that. So they came along with their "baller on the budget" replicas, but if it wasnt for bpi popularity they wouldn't even had considered copying it. So I give credit where credit is due, and buy the "original."

[KevinT707]

^^
Darryl, normally I would put you down on this cause you know I never care about brand names and expensive parts that make little power but after you're last post you're ok with me . If the velocity stack makes power then lemme borrow it sometime ..

[BryanPendlet]

It's more of a principal thing for me. Blox makes a living by duplicating everything popular and functional without the headache of R&D. They see a popular produce and duplicate it. The only reason why their produces are cheaper is because the take shortcuts and use cheaper materials and I wont support their tactics. Plus, I'm not building my car on a "tight" budget nor is in a rush in finishing it, so I not to worry about prices.

Also, majority of the price came from the filter and not the velocity stack. The velocity stack itself is about $35. You're paying for a good quality air filter (K&N) unlike the cheap no name brand filter you get with the blox product.

I know they aren't the "creators" of the velocity stack since it was use in many other applications (besides just automobiles), but they did make it popular in the Honda scene and blox caught on to that. So they came along with their "baller on the budget" replicas, but if it wasnt for bpi popularity they wouldn't even had considered copying it. So I give credit where credit is due, and buy the "original."

We appreciate your support, I only wish everyone else shared your opinion. BLOX has a extensive dealer network in place, were BPI has little, so are market share is small. BLOX has probably sold several times what we have sold, and its unfortunate, because it hurts our development of new sizes too. I would love to get a 2.75", 2.5" and a 4" out there on the market. With time these sizes should come to fruition, but because of stolen market share by BLOX development and tooling will be delayed for years, if they are produced at all.

If anyone know of any local import shops with dyno capabilities, please let me know of them and I will send them a complimentary stack for testing purposes.

Bryan
BPI
[email protected]
www.bpinitiatives.com

[BryanPendlet]

^^
Darryl, normally I would put you down on this cause you know I never care about brand names and expensive parts that make little power but after you're last post you're ok with me . If the velocity stack makes power then lemme borrow it sometime ..

You are not going to get BIG gains from a stack. We are talking on the order of 1-5% here, BUT, BUT for a $100 and a 5minute installation, I will be hardpressed to find more inexpensive, easier to install mod with the return. The gains are generally seen across the whole powerband as well, Not a Volumetric Effeciency shift like many of your "breathing mods" (ie. intake, header, exhaust, cams, etc)

I will also extend the offer, that for anyone individual willing to dyno test our stack before and after, we will send a complimentary stack or refund the cost of a stack.

[ATK_Designs]

^ deal? Emailed.

[bigdare23]

^^
Darryl, normally I would put you down on this cause you know I never care about brand names and expensive parts that make little power but after you're last post you're ok with me . If the velocity stack makes power then lemme borrow it sometime ..

LMK and you got it homie

[bigdare23]

We appreciate your support, I only wish everyone else shared your opinion. BLOX has a extensive dealer network in place, were BPI has little, so are market share is small. BLOX has probably sold several times what we have sold, and its unfortunate, because it hurts our development of new sizes too. I would love to get a 2.75", 2.5" and a 4" out there on the market. With time these sizes should come to fruition, but because of stolen market share by BLOX development and tooling will be delayed for years, if they are produced at all.

If anyone know of any local import shops with dyno capabilities, please let me know of them and I will send them a complimentary stack for testing purposes.

Bryan
BPI
[email protected]
www.bpinitiatives.com

Well I'm planning on dyno'n soon, so I'll let you know the results!

[allen8603]

please post the results, been debating on one of these

[9ussy]

please post the results, been debating on one of these

x2

[BryanPendlet]

x2

With the exception of the b17 civic which was my own, all dyno data on our website is customers or tuner shops like yourselves.

What kind of cars you you all driving? or should i say what motor?

[bigdare23]

With the exception of the b17 civic which was my own, all dyno data on our website is customers or tuner shops like yourselves.

What kind of cars you you all driving? or should i say what motor?

Well I'm running just a b16.

[southside]

Well I'm running just a b16.

Just a b16

[eViLMunkey]

here not a knock off either: (it's the Blox version for $37)
http://www.weaksauceparts.com/store/...8&cat=0&page=1

[bigdare23]

here not a knock off either: (it's the Blox version for $37)
http://www.weaksauceparts.com/store/...8&cat=0&page=1

Blox version = knock off

Look at this, the real one is slightly cheaper
http://www.bpinitiatives.com/stacks.php

[southside]

Lol yea Blox is a knockoff even tho its a actual company its still a knockoff.They copy alot of people and sell it like they were the first.

[KevinT707]

What kind of cars you you all driving? or should i say what motor?

I never really had interest in velocity stacks but I like you Bryan, so I might just try one out & who knows I might just pick up a couple WHP.

I have a LS/VTEC (w/ built top & bottom end for nitrous) in a CRX.

[9ussy]

What kind of cars you you all driving? or should i say what motor?

Ls with mild build... see if i can really pick up a couple more Whp

[BIG WORM]

couldn't you get the same effect by putting window screen and a rubber band on the end of the pipe? panty hose? an old sock? My friend had one in his front bumper, but it was more for looks, I thought. Isn't a open pipe the same?

[southside]

I dont think thats the same seeing that I tried using a stocking.But you cant hear the intake like you hear it with the V-stack.