I have a Dseries motor(y8) and I was wondering what does "head work" mean exactly and would it be a waste or will i see some decent gains.
head work question
I have a Dseries motor(y8) and I was wondering what does "head work" mean exactly and would it be a waste or will i see some decent gains.
on your car, i'd be a waste unless you were/are going to build ur entire motor. It's benefical if you go boost for better flowing, well it's better in every category.Originally Posted by VIP Style
port and polish, valve job, bigger valves, cam(s), and valve springs.
The Carbon Fibered R6
ok well on that note, what do you recommend I do to the motor before going boost?
buy a DOHC they aren't that much money.. a SOHC is a boat achor.
1996 4dr Integra
1992 Mr2 Turbo
RPM = Ruins People's Motors
x2, you'd be wasting ur money on the SOHC and not getting anywhere near the gains as the twin cam
The Carbon Fibered R6
your ****ting me right? There are people making 400whp on boosted d15 and 16's. There are multiple sohc setups that will wax a B motor.
And they dont last at all. Ask Halfwit and 11281 on here about their D series setups.
this is the NA forum, D series in NA form is a waste of money, you might make 140whp with a crazy cam, built engine, thats 10-15 whp less than a STOCK GSR
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
not to mention if you have alot of miles an do head work you will throw the bottom end out,
LOL so wrong
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
no replacement for displacement go big or go home pizza boy!
no affense...but that doesnt really apply when the size is going up by .2 lol.
The Carbon Fibered R6
ok you got me
lmao!!!!!!
to make a sohc make 400hp......money i mean, you can take half of that an make a b series /hseries hit 500-650 hp homie, an have less money then making a sohc to handle 400 hp!!!! the all motor record was like 215 hp.......am off on exact number but am close...... an it cost hella lot to make that,,,, dont waste your time with sohc.... unless your broke.......the reason why ppl do ls turbo then gsr turbo is they are broke... but you put equal amount of money into them an tune the right!!! gsr will walk on the ls...... that is the same with sohc...take to equal amount sohc/an dohc..n the dohc will walk.... i dont care who you are!!!!!!
1st of all - he didn't come in here asking about B series sh.it. I hate it when people do this.
rods, cost the same for a D or B. Pistons cost the same for a B or D. Turbo kits cost ABOUT the same for a B or D. So YES, the POTENTIAL to make more power is there w/ the B series pound for pound. But I am tired of every1 doing the same sh.it also.
I'd love to see some1 build a SERIOUS all-motor D that's not a bolt-on car. And I'd love to see some1 put 2 - 3k into a D series head, bump up the CR -- maybe a d17 crank and rods, a header, cams, and tune the hell out of and WAX B SERIES ASS!!!
To answer your question w/out suggesting you go D. MAKE SURE that you set goals for what you want, otherwuse you're halfway through a project and some1 will make you change your mind. WRITE IT DOWN! If you want to take the road less traveled and put together a serious D then go for it. And if u want to know how much serious heads will sit you back then hit Jim up at www.stewartengines.com and talk to him. You can go from a simple port/polish w/ reloaded hardware or you can go all out.
Most of all, build what YOU want to build. Good luck.
"I'm not a gynecologist... but I'll take a look."
LOL i hear ya, but yeah thanks alot man.
Or buy a stock camaro and beat all of the above.
what an intelligent response coming from the retard who bought a Camaro
The Carbon Fibered R6
Your Gay...
...-1.
Trend settin'
heh....i have a d series and i wax b16 all day long, havent raced a b18. to you who think d series have no potential: your right, as compared to a b16 or b18. however, if someone wants to build a d series, let em do it without all the bitching. i mean all you see is b series this and b series that. if you want to go there, k series has more potential than b series. there is something always out there that is bigger and better and has more potential. so there is no sense in arguing about it
98 Acura Integra LS-DD
??????????????????-project
x2 btwYour Gay...
...-1.
98 Acura Integra LS-DD
??????????????????-project
camaro...lmao! cheap american muscle. lol. camaro's arent fast.
Boost under slow construction...
to JoshuaSAE... why don't you look up Endyn or Bisimoto if you only think a D can hit 215. for those boys thats a dang street motor. and yes you will probably say that " well with the money you could put in the D you could of had a B swap" chances are he wants to be different. and hell for what you could spend in a B swap you could have a D with just much power and more torque. That could probably beat that B. but yes I also know the other come back of " well thats just a stock B and the B has more potential"
to each his own!
to the O.P:
with doing a head work on the D series it really wont pick up much if any power by doing a port / polish type work. the biggest gains from the D come from a really good valve job and work around the seat. Also, if your going to stay in the All motor / small nitrous category have the bowl worked and then welded where needed so that you can get a better quench.
CJ
Lol
Trend settin'
Posting Permissions
Reply With Quote
