1989 Oldsmobile Cutlass SHOW READY

[dtmcnamara]

Ok so here is all the information on the car:

1983 Olds Cutlass Supreme

ENGINE:
388 Stroker
Bored .040 over
zero deck height
400 steel crank
Keith Black 6" rods and pistons
Lift
.518 intake
.536 exhaust
.246 intake duration @ .50
.253 exhaust
Holley aluminum heads
Ported and polished
Heads shaved .010
Holley Aluminum intake
Holley 831 carb built by Patton racing carburetors
Holley fuel pump
MDS 6AL ignition
MSD distributor
Hooker headers
Hooker mufflers
Griffin Aluminum radiator
Duel electric fans
All hoses real stainless steel braided
New A/C compressor

TRANSMISSION:
TCI turbo 400
3000 Stall converter

REAR END:
Auburn posi unit
373 Richmond gears
3" aluminum drive shaft

BRAKES:
Front
Disks with SS hardware
Rear
Drums with SS hardware

WHEELS:
Front
American Racing 15"x9" grey spokes- polished
Rear
American Racing 15"x9" grey spokes- polished

TIRES:
Front
Dunlop 245/60R/15
Rear
Dunlop 275/60R/15

PAINT:
Pewter Grey $7,200 (R&B Collision)

INTERIOR:
Dark brown all new
Trunk matches interior with custom sound system

SOUND SYSTEM:
Kenwood KDK-X815
JL Audio 250/1
Xtan 4180C
Infinity speakers
2-10" JL Audio Subwoofers

ENTIRE CAR WAS COMPLEATED 1 YEAR AGO

ASKING PRICE $16,000 OBO

FOR MORE INFORMATION PLEASE CONTACT DAVID MCNAMARA @ 404-725-4979 OR PM ME

http://i20.photobucket.com/albums/b230/dtmcnamara/DSC00080.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC00081.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC00082.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC00083.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC00084.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC00085.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/DSC00086.jpg
http://i20.photobucket.com/albums/b230/dtmcnamara/th_MOV00002.jpg (http://s20.photobucket.com/albums/b230/dtmcnamara/?action=view&current=MOV00002.flv)

[silversol]

nice but i dont see 40K

[kennyboi]

nice lookin car but why is it a chevy cutlass?

[dtmcnamara]

The numbers i was given were:

$15K in the motor+suspension
$5K in the paint
+all inside restoring
+all outside restoring
+car price

[HiPSI]

nice lookin car but why is it a chevy cutlass?


because he can't read the emblems in the pics ;)

[dtmcnamara]

nice lookin car but why is it a chevy cutlass?

hahah...you got me, i thought it was marked chevy...my bad

[2.0civic]

+ original car price maybe..if he put that much into restoration, that must have been a $500 peice....whats in the motor for 500HP?? im not seeing it unless its nitrous

[dtmcnamara]

+ original car price maybe..if he put that much into restoration, that must have been a $500 peice....whats in the motor for 500HP?? im not seeing it unless its nitrous

i will get all specs on the engine tomorrow but no nos that i know of

[thepolecat]

G/l on sale man,

but I have to argree- if you were going to dump 40grand on a cutlass you probably could have bought the same thing already finished.

[dtmcnamara]

G/l on sale man,

but I have to argree- if you were going to dump 40grand on a cutlass you probably could have bought the same thing already finished.

wasnt me who put the money in the car. its really a car that someone has to like to want because its not a real collectors car yet

[ruffriderGA]

reguardless of the price though that thing is nice.

[dtmcnamara]

reguardless of the price though that thing is nice.

thanks, hopefully it will sell fast. Tell your friends

[BiH1320]

nice. goodluck

[THEONE]

what engine is that? olds or chevy?

[Ltdnismorace]

someone buy it and drift that sombiatch

[con]

damn that's clean. :thinking: why my grandma didn't keep hers in good condition........

[vjizzle]

yea man this thing is super clean!!!

[buddha@TeamFX]

bump for a g-body...yea if its a 500hp small block it would have to have a good combination to produce that.

[thinkfast®]

clean ass ride, trunk is not to my liking tho LOL (I was expecting a mean three wheel pic)

good luck w/ the sale homey, I dont see $40k in there either, nowhere close to $5k in paint, I could go on.. nice STS in the garage too :goodjob:

[anothaRRR]

The car is probably a 1986 model, not a 89, from 87-early 88 the changed front end to the Euro front...

Its a nice clean car but not $16k worth....

[Sammich]

man that is a nice cutlass..free bump for a wanted car

[thinkfast®]

The car is probably a 1986 model, not a 89, from 87-early 88 the changed front end to the Euro front...

Its a nice clean car but not $16k worth....

^^ yea you see a lot of conversions on the older cutty's, not so much retro fitting though lol.. I gotta agree not 16k worth, but he did put some money into it.. dont know how he would spend $15k on just motor and suspension either, 500hp can be had easy w/ a small block all day

ok Im done lol

[dtmcnamara]

clean ass ride, trunk is not to my liking tho LOL (I was expecting a mean three wheel pic)

good luck w/ the sale homey, I dont see $40k in there either, nowhere close to $5k in paint, I could go on.. nice STS in the garage too :goodjob:

THANKS. the STS and the 2006 corvette may be up for sale soon also...looking to get a CTS-V and a 2007 Z06.

[dtmcnamara]

ALL INFORMATION UPDATED!!! NEW PICS WILL BE UP ONE DAY THIS WEEK

[thinkfast®]

go w/ the STS-V homey!! you wont be sorry... I drove one of my homeys out in Cali, that ride is SICK

[dtmcnamara]

go w/ the STS-V homey!! you wont be sorry... I drove one of my homeys out in Cali, that ride is SICK

its not for me, it would be for my boss, but we are practically family. so if he gets it, I GET TO DRIVE IT TOO!!!

[vjizzle]

its not for me, it would be for my boss, but we are practically family. so if he gets it, I GET TO DRIVE IT TOO!!!

yea the **** you will cous if you do just go on and ride to my place and pick my ass up :D...

the pics are not that great to show off the paint... it dont look like much on the camera but i person you will def see why it cost 5k for it.. its perfect and dont right ( non of that maco shit) the motor is a fresh build and has almost no miles on it.... i can vouch for this car and the 16k price for a little toy like this aint much... i guess you just have to c it and ride in it to c what im talken about. this thing would me in my garage right now if it wasent for the 4-7 mpg it gets. :goodjob:

[dtmcnamara]

yea the **** you will cous if you do just go on and ride to my place and pick my ass up :D...

the pics are not that great to show off the paint... it dont look like much on the camera but i person you will def see why it cost 5k for it.. its perfect and dont right ( non of that maco shit) the motor is a fresh build and has almost no miles on it.... i can vouch for this car and the 16k price for a little toy like this aint much... i guess you just have to c it and ride in it to c what im talken about. this thing would me in my garage right now if it wasent for the 4-7 mpg it gets. :goodjob:

Thanks. The reason teh paint was so much was because the car was taken apart and media blasted and then every part was painted.

[buddha@TeamFX]

What kind of heads are on the motor, carb, what size cam is in it...compression, pistons, etc....???

[dtmcnamara]

What kind of heads are on the motor, carb, what size cam is in it...compression, pistons, etc....???

heads-
Holley aluminum heads
Ported and polished
Heads shaved .010

carb-
Holley 831 carb
built by Patton racing carburetors

cam-
need to find out

compression-
need to run a check

pistons-
Keith Black 6" rods and pistons

[DroPed@BiRth]

Bump for one hell of a sleeper! To rich for my blood though.

[dtmcnamara]

bump